Purpose: For measurement of horizontal, parallel, and angle of inclination, For measurement of horizontal, parallel, and angle of inclination, Display Mode: Reg. mode, comparison mode switchable, Functions: AUTO POWER OFF (AFTER 6 minitues. or so after operation starts), BATTERY CHARGE WARNING (LIQUID CRYSTAL DISPLAY), Continuous Opreration Time: About 600 hours(at the time of alkaline dry cell use), Angle (Degree): 360 degree (detection range) 4 directions 90, and 4 directions 99.9% , Minimum : 0.1 degree or 0.1%, Power: AAA battery x 3pcs (included), Weight (g): 324, Height (mm): 56, Thickness (mm): 31, Length (mm): 155, TRUSCO Part Number: 294-6718
Digital Display: Unit (switch mode) 0.05 degree and 0.1 degree, Display Mode: Four mode
1 The angle (in 0.1 degrees)
1 The angle (in 0.1 degrees)
3, % _ _
4 a 1 m rise, Precision of Bubble Tube: Within [ +/-1.7 mm/m=+/-0.0984degree ], Vial Sensitivity: 0.57mm/m=0.0328 degree, Buzzer Sound: (Setting) 0 degree, 90 degree, and angle (any of) HOLD
PRESS THE HOLD BUTTON TWO TIMES AT ANY ANGLE YOU CAN SET ELECTRONIC SOUNDS.POWER GOES OFF THE RECORD WILL BE ERASED.ELECTRONIC SOUND CAN ALSO SWITCH ON/OFF AND MODE BUTTON HOLD., Batteries: CR 2032 X 2 PCS, Functions: Loudly horizontal / vertical, any angle makes
Easy precision with compensation, digital anti turning ability with
THE AUTO POWER-OFF THREE MINUTES WITH MAGNET, Pricision: (Digital precision) / 0 degree +/- 0.05 degree, 90 degree /...
Caution: Reading accuracy / quantization error (+/-1 count) not included., Reading accuracy / quantization error (+/-1 count) not included., Reading accuracy / quantization error (+/-1 count) not included., Reading accuracy / quantization error (+/-1 count) not included., Purpose: angle measurement and assembly of mashine, mold and tools. Angulation of processing standard, angle measurement and assembly of mashine, mold and tools. Angulation of processing standard, angle measurement and assembly of mashine, mold and tools. Angulation of processing standard, angle measurement and assembly of mashine, mold and tools. Angulation of processing standard, Minimum Value (degree): 0.1, Pricision: Reading / +/- 0.2 degree, Power: CR2032 (LITHIUM BATTERY), Operating Temperature Range (deg C): 5 - 45...
Purpose: To fill in for work on the blackboard., To fill in for work on the blackboard., Compatible Dimensions (mm): 9.8 - 12, Weight (g/pc): 30, TRUSCO Part Number: 308-1478, Accessories: 3 Pieces of chalk
Spirit Levels > Marker and Bamboo Brush for Marking > Marker and Crayon
Detection Accuracy: At positions of 0 degree, 90 degree, 180 degree, 270 degree +/- 0.1 degree
Other than that +/-0.2 degree, Laser Light Precision: +/-2mm/5m, Optical Output: Below 1mW Class 2 (JIS C 6802: 2005), Beam Diameter: About phi 3 mm(laser irradiation position on 5 m, indoor light at 200-300 LX), Auto Power-off: Available, after 20 minitues the operation starts, Dust-proof Water-proof: Equivalent to IP54, Light Source: 635nm red diode laser, Continuous Opreration Time (hours): At laser on/ about 20, at laser off/ about 50, Measurement Range (degree): 360 (4 directions 90 degree and 4 directions 99.9% display), Display Type: (Angle) normal modes, comparison mode switchable, Display: liquid crystal display (degree, % switchable ), with backlight, 180 degree rotatable
0 degree, 9...
Gradient Display: 2-, 3-, 4-, 5-, 6- 7and 8 minutes and 1.0% , 1.2% , 1.5% , 1.8% , 2.0% ,3.0% and 5.0%.Other than the above , please refer to the back of the product for further information such as angle balance or gradient method etc . , Inclination Angle: One scale =1degree90degree-0degree-90degree(180degree), Pricision: +/- 0.5 degree, Size: 95 x 95 (1 side x 1 side ) x (thickness) 30 mm, Application: For all work requires a gradient and angle such as steel structure, construction, plumbing and drainage.
Detection Angle Range (degree): (100% view eight directions and four direction 90 degree) 360 degree, Beam Distance (m): I will drop in the (outdoor use) hot weather is about 10m reach under illumination about a 30m (indoor use) common, Display Mode: (Angle) normal mode, compare mode switchable, Detection Accuracy: +/-0.1 degree left other than = +/-0.2 degree 0 degree / 90 degree / 180 degree / 270 degree position during, Precision of Bubble Tube: +/-1.0mm / m = +/-0.057 degree, Laser Light Precision: +/-2mm/5m (point laser irradiation), Optical Output: Less than 1mW Class 2 (JIS C6802: 2005), Beam Diameter: (- 300LX when 200 interior illuminance) phi3mm about 5m in irradiation position, Operating Temperature and Humidity Range: -5deg C - (non-condensing) 90% less than +50 deg C, Ligh...
Purpose: For revolution type goniometry
For engineering works, For revolution type goniometry
For engineering works, Color (Body): Black (skeleton), Pricision: +/- 17.5 mm / m = +/- 1.0 degree within, Body Weight (g): 295, Dimensions (Length L x Width W x Height H) (mm): 20x150x250, Sensitivity (mm/m): 0.50=0.0286 degree, TRUSCO Part Number: 410-5125, Specification: ABS resin Rotary Waterproof type