Buy more than* S$200* and get FREE SHIPPING
Due to the new coronavirus, there has been a surge in demand for safety protective equipment such as masks and protective clothing and therefore, production is not meeting the demand currently.
Some of our products are out of stock and it is difficult to accept orders.
We apologise for the inconvenience caused to you.
We sincerely ask for your kind understanding.

Grinder

Sort by:
Showing 1 - 30 of 306 Results
Show: 30 60 90
VIEW: Grid View List View
Micro Hand Tool
UHT
5.00(1)
489.90 SGD
ADD TO CART
Set Contents: Msg-3BSN body-10 phi with wheel 1 / 13 with a phi shaft Nyusofu2 strap-25 phi foil-Nyusofu trap (# 240, # 320, # 400, # 600, # 800, 1000, 1500 1 of each), with Stepin, spanner 1 each, air hose (1.5 m) 1 book ,over hose , filter 1 internal hose joint, case, Overall Length (mm): 143, Type: Straight type, Maximum Rotation Speed (min-1[r. p.m]): 65000, Switching Method: Grip control valve, Body Weight (g): 130, Air Consumption (NL/min): 120, Exhaust System: Backwards, Shank Axis: 3mm, Hose Connection Diameter: PT 1/4, Supply Air Pressure (kgf/cm3): 6+/-1, Purpose: For precise grinding and polishing job
Category Grinder > Micro Grinder
Mini Grinder
CUSTOR
4.00(3)
87.99 SGD
ADD TO CART
Specification: Safety lever system, Weight (g): 360, No Load Rotation Speed (min-1[r.p.m]): 25000, Hose Inner-Diameter (phi mm): More than 6.5, Dimensions (Width x Length) (mm): 65x152, Air Consumption (m2/min): 0.24, Air Inlet: NPT1/4, Exhaust System: Rear exhaust-, Compatible Air Pressure: recommended 6.3 (90 psig), Collet Diameter (phimm): 6.0(1/4)
Category Grinder > Micro Grinder
Micro Air Grinder
TRUSCO
5.00(1)
289.90 SGD
ADD TO CART
Specification: Hose inlet/One touch P plug, exhaust method/backward, TRUSCO Part Number: 301-9128, Overall Length (mm): 155, Weight (g): 108, No Load Rotation Speed (min-1[r.p.m]): 60000, Chuck Bore (phi mm): 3, Working Pressure (MPa): 0.4 to 0.6, Air Consumption (m3/min): 0.15
Category Grinder > Micro Grinder
Micro Angle Grinder
UHT
489.90 SGD
ADD TO CART
Application: For precise grinding and polishing job, Overall Length (mm): 107, Height (mm): 78, Type: 120 degree angle type, Maximum Rotation Speed (min-1[r. p.m]): 52500, Switching Method: Grip control valve, Body Weight (g): 140, Supply Air Pressure (MPa): 0.6, Air Consumption (NL/min): 120, Exhaust System: Backwards, Shank Axis: 3mm, Hose Connection Diameter: PT 1/4
Category Grinder > Angle Grinders
Grinder
URYU SEISAKU
289.90 SGD
ADD TO CART
Specification: Collet chuck: Zipper CP for 6-mm shaft (with chuck nut), TRUSCO Part Number: 211-6006, Overall Length (mm): About 164 (with no whetstone), Weight (kg): About 0.54 (with no whetstone), No Load Rotation Speed (min-1[r.p.m]): 25000 (highest), Air Consumption (m3/min): About 0.4 (air pressure 0.6MPa at the time of no load), Collet Chuck Dimensions (mm): 6, Length from Shaft to Side (mm): About 17.0, Hose Mouthpiece Mounting Screw: PT1/4, Recommended Hose Diameter (mm): 9.5, Noise Level (dB(A)): 85
Category Grinder > Straight Grinder
Micro Air Grinder
Super Tool
5.00(1)
339.90 - 469.90 SGD
Supply Air Pressure (MPa): 0.6, Exhaust System: Backward
Category Grinder > Micro Grinder
Micro Air Grinder GEM NEW MOTOR
Gem
5.00(1)
439.90 SGD
ADD TO CART
Accessories: Collet (phi 3) / 1 piece Air hose phi5.8 (inner diameter) x phi8.5 (outer diameter) x 1.5 m (length)/1 piece Exhaust hose 0.5m (length) 1 piece Box spanner, (6mm)/1 piece Grip wrench, (8 mm)/1 piece Mule, sleep (phi 20 mm)/1 piece Tool box/1 piece, Overall Length (mm): 137 (Without hose), Weight (g): 100, Maximum Rotation Speed (min-1[r. p.m]): 60000, Chucking Ability (mm): phi3, Throttle System: ON-OFF VALVE, Supply Air Pressure (MPa): 0.5(+0.2/-0.1), Air Consumption (L/minANR): 160, Purpose: Metal precise finishing. After-treatment of the deburring, molding, grinding, sculpture and internal processing of metal. Cutting work and grinding processing of lumber, stone and plastic etc. After the welding surface finish.
Category Grinder > Micro Grinder
Air Angle Grinder
YANASE
5.00(1)
299.90 SGD
ADD TO CART
Accessories: TOP minidisk #40, #60, #120 1 each regulator, coupler, replacement wrench, Allen wrench, each one, Overall Length (mm): 140, Weight (g): 530, Revolution (min-1[r.p.m]): 22000, Working Pressure (MPa): 0.44 - 0.58, Air Consumption (m3/min): 0.6, Size (mm): (Disk) phi58x10, Exhaust Direction: Side
Category Grinder > Angle Grinders
Mini Angle Grinder
CUSTOR
5.00(2)
129.90 SGD
ADD TO CART
Specification: Safety lever system, Weight (g): 540, No Load Rotation Speed (min-1[r.p.m]): 22000, Hose Inner-Diameter (phi mm): More than 6.5, Outer Dimensions (Length L x Width W x Height H) (mm): 155x65x75, Air Consumption (m2/min): 0.24, Air Inlet: NPT1/4, Exhaust System: Rear exhaust-, Compatible Air Pressure: recommended 6.3 (90 psig), Collet Diameter (phimm): 6.0(1/4)
Category Grinder > Angle Grinders
Micro Angle Grinder
UHT
4.00(1)
489.90 SGD
Application: For smoothness grinding and polishing work, Switching Method: Grip control valve, Supply Air Pressure (MPa): 0.6, Air Consumption (NL/min): 120, Hose Connection Diameter: PT 1/4
Category Grinder > Angle Grinders
Micro Air Grinder, Mach Motor,
Gem
399.90 SGD
ADD TO CART
Accessories: air hose diameter phi5.8 (inner diameter) x phi8.5 mm (outer diameter) x 1.5 m (length) / 1 piece Exhaust hose / 1 piece Pintor (phi3 mm) / 1 piece Open ended wrench (for 8 mm for) / 1 piece, Overall Length (mm): 144, Weight (g): 140, Maximum Rotation Speed (min-1[r. p.m]): 60000, Chucking Ability (mm): phi3, Throttle System: ON-OFF VALVE, Supply Air Pressure (MPa): 0.5(+0.2/-0.1), Air Consumption (L/minANR): 180, Hose Connection Port (air source side): R1/4, Exhaust System: Back, Purpose: Metal precise finishing. After-treatment of the deburring, molding, grinding, sculpture and internal processing of metal. Cutting work and grinding processing of lumber, stone and plastic etc. After the welding surface finish.
Category Grinder > Micro Grinder
Grinder
URYU SEISAKU
5.00(2)
299.90 SGD
ADD TO CART
Specification: Collet chuck: Zipper CP for 6-mm shaft (with chuck nut), TRUSCO Part Number: 211-6014, Overall Length (mm): About 174 (with no whetstone), Weight (kg): About 0.56 (with no whetstone), No Load Rotation Speed (min-1[r.p.m]): 25000 (highest), Air Consumption (m3/min): About 0.4 (air pressure 0.6MPa at the time of no load), Collet Chuck Dimensions (mm): 6, Length from Shaft to Side (mm): About 17.0, Hose Mouthpiece Mounting Screw: PT1/4, Recommended Hose Diameter (mm): 9.5, Noise Level (dB(A)): 85
Category Grinder > Straight Grinder
6mm Air Die Grinder
ESCO
4.25(4)
66.99 SGD
ADD TO CART
ESCO Part Number: EA159DN-2, Overall Length (mm): 155, Weight (g): 380, Chuck Dimension (inch): 1/4(6mm), Working Pressure (MPa): 0.64, Maximum Speed (min-1[r. p.m]): 25000, Air Consumption (L/min): 228, Indispensability Compressor (kw): 1.5 to 2.2, Suction Port Size: 1/4inchPT
Category Grinder > Straight Grinder
Marking Pen
WEN
649.90 SGD
ADD TO CART
Type: Pneumatic, Weight (g): 170, Air Consumption (m3/min): 0.025, Body Size (phi mm): 17.3, Frequency: 500-600 strokes per minute, Unit Length (mm): 160, Using Air Pressure (kg/cm2): 4 to 7, Purpose: Engraving on various metals and glass. Make groove to remove broken tap. To remove sand and dust enter in complex places such as small casting hole etc.
Category Grinder > Micro Grinder
Sonic Air
NITTO KOHKI
4.50(2)
459.90 SGD
ADD TO CART
Accessories: Whetstone No.2 (phi17x32mm) 1 No.3 (phi19x20mm) 1 zipper pin 1 spanner 14mm 1 coupler 200-30SH 1, TRUSCO Part Number: 116-6336, Type: Air-operated die grinder, Overall Length (mm): 135.5, Weight (kg): 0.6, No Load Rotation Speed (min-1[r.p.m]): 27000, Air Consumption (m3/min): 0.4, Working Pressure (MPa [kgf/cm2]): 0.59[6], Chuck Diameter (mm phi): 6, Purpose: Only for a whetstone
Category Grinder > Micro Grinder
Air Grinder
PAULSTRA
4.50(6)
119.90 SGD
ADD TO CART
Weight (kg): 0.34, No Load Rotation Speed (min-1[r.p.m]): 25000, Body Dimensions (Length x Width x Height) (mm): 125x47x33, Air Consumption (L/min): 230, Maximum Working Pressure (MPa): 0.59, Collet Chuck Dimensions (mm): phi3.18, 6.0, 6.35
Category Grinder > Straight Grinder
Midget Grinder
YOKOTA INDUSTRIAL
279.90 - 289.90 SGD
Accessories: Spanner (two), touch joint (1), Specification: Exhaust direction: forward, Air Pressure (MPa): 0.6, Hose Mouthpiece Mounting Screw: 1/4Rc, Use Hose Diameter (mm): 9.5, 2014 TRUSCO Published Page: 2-1551
Category Grinder > Straight Grinder
Air Angle Grinder, 50mm
YoshidaTools
5.00(4)
329.90 SGD
ADD TO CART
Accessories: Coupler plug NL-22PM, Overall Length (mm): 156, Weight (kg): (Toishikaba with) 0.645, Maximum Peripheral Velocity (m/min): (Wheels) 4300, System: (Handle) roll, Screw Dimensions: (Air inlet) RC1 / 4, Grinding Wheel Dimensions (mm): 50x4x9.5, Rolling Speed of No-load (min-1[r.p.m]): 15000, Recommended Hose Diameter (mm): 9.5, Air Consumption (Nm3/min): (No load) 0.47, Head Height (mm): 47
Category Grinder > Angle Grinders
Grinding Stone for Mini Mini Angle Grinder
MASTER AIR
1.00(1)
64.99 SGD
ADD TO CART
Compatible: 2013, Grinding Wheel Diameter (phi mm): 50
Category Grinder > Angle Grinders
Air Sonic
NITTO KOHKI
5.00(1)
599.90 SGD
ADD TO CART
TRUSCO Part Number: 116-6344, Overall Length (mm): 170.7, Weight (kg): 0.45, No Load Rotation Speed (min-1[r.p.m]): 37500, Air Consumption (m3/min): 0.35, Working Pressure (MPa [kgf/cm2]): 0.59[6], Chuck Diameter (mm phi): 6, Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
Category Grinder > Micro Grinder
Air Sonic
NITTO KOHKI
649.90 SGD
ADD TO CART
TRUSCO Part Number: 116-6361, Overall Length (mm): 168, Weight (kg): 0.45, No Load Rotation Speed (min-1[r.p.m]): 37500, Air Consumption (m3/min): 0.35, Working Pressure (MPa [kgf/cm2]): 0.59[6], Chuck Diameter (mm phi): 6, Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
Category Grinder > Micro Grinder
Turbo wrap linear
UHT
649.90 SGD
ADD TO CART
TRUSCO Part Number: 334-3294, Dimension (mm): 218, Body Weight (g): 180, Air Consumption (NL/min): 46, Hose Connection Diameter: PT 1/4, Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
Category Grinder > Micro Grinder
Micro Angle Grinder
YANASE
399.90 SGD
ADD TO CART
Accessories: ♯60 1 pcs "cup grinding wheel, one rubber pads, phi30♯80 1 pcs TOP minidisk each three polishing cloth disc Z60 A120, two each Uni Ron disk ♯240♯600 two replacement pin, one hex wrench, one coupler ", Specification: Type 90 degrees, Overall Length (mm): 145, Weight (g): 230, Revolution (min-1[r.p.m]): 21000, Working Pressure (MPa): 0.44 to 0.58, Outer Diameter (phi mm): 19, Air Consumption (m3/min): 0.2, Exhaust Direction: Backward
Category Grinder > Angle Grinders
Air Straight Grinder
Nippon Pneumatic Mfg
379.90 SGD
ADD TO CART
Accessories: Coupler plug 20PM, box wrench 17mm 22mm, turning spanner phi28mm for, TRUSCO Part Number: 111-5472, Overall Length (mm): 311, Weight (kg): 1.3, No Load Rotation Speed (min-1[r.p.m]): 18000, Chuck Bore (phi mm): 6, Grinding Wheel Dimensions (mm): Wheel grinder phi32, Hose Inside-Diameter (phi mm): 9.5, Air Consumption (m3/min): 0.55, Collet Size (mm): 6, Hose Mouthpiece Mounting Screw: Rc1/4, Exhaust Direction: Lateral, 2014 TRUSCO Published Page: 2-1552, Purpose: Welding finish of casting deburring part, heavy grinding work, and polishing work., Caution: Air pressure should be around 0.6MPa inlet of product.
Category Grinder > Straight Grinder
Air Grinder
ESCO
369.90 SGD
ADD TO CART
ESCO Part Number: EA159DD, Overall Length (mm): 194, Weight (g): 600, Chuck Dimension (inch): 1/4(6mm), Working Pressure (MPa): 0.64, Maximum Speed (min-1[r. p.m]): 24000, Air Consumption (L/min): 114, Indispensability Compressor (kw): 2.2, Suction Port Size: 1/4inchPT, Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
Category Grinder > Straight Grinder
Air Grinder Kit
ESCO
179.90 SGD
Chuck Dimension (inch): 1/4(6mm),1/8(3mm), Indispensability Compressor (kw): 2.2, Suction Port Size: 1/4inchPT
Category Grinder > Straight Grinder
Air die grinder
ESCO
289.90 - 439.90 SGD
Working Pressure (MPa): 0.64, Air Consumption (L/min): 115, Suction Port Size: 1/4inchPT, Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
Category Grinder > Angle Grinders
Grinder
URYU SEISAKU
389.90 SGD
ADD TO CART
Collet Chuck Dimensions (mm): 6, Hose Mouthpiece Mounting Screw: PT1/4, Recommended Hose Diameter (mm): 9.5, Noise Level (dB(A)): 85, Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
Category Grinder > Straight Grinder
Long shaft type straight grinder
FUJI INDUSTRIAL TECHNIQUE
389.90 - 779.90 SGD
No Load Rotation Speed (min-1[r.p.m]): 12000, Grinding Wheel Hole Diameter (phi mm): 9.5, Wheel Spindle Screw Size: 3/8-16, Hose Mouthpiece Mounting Screw: PT3/8, Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
Category Grinder > Straight Grinder
Grinder
URYU SEISAKU
459.90 SGD
ADD TO CART
Grindstone (Outer Diameter x Thickness x Inner Diameter): 100x6x15, Hose Mouthpiece Mounting Screw: PT1/4, Recommended Hose Diameter (mm): 9.5, Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
Category Grinder > Angle Grinders

1 2 3 4 5 6 7 8 9 10 ...11 Next