Buy more than* S$200* and get FREE SHIPPING

Grinder

Sort by:
Showing 1 - 30 of 266 Results
Show: 30 60 90
VIEW: Grid View List View
Micro Hand Tool
UHT
5.00(1)
409.99 SGD
ADD TO CART
Purpose: For precise grinding and polishing job, Supply Air Pressure (kgf/cm3): 6+/-1, Hose Connection Diameter: PT 1/4, Shank Axis: 3mm, Exhaust System: Backwards, Air Consumption (NL/min): 120, Body Weight (g): 130, Switching Method: Grip control valve, Maximum Rotation Speed (min-1[r. p.m]): 65000, Type: Straight type, Overall Length (mm): 143, Set Contents: Msg-3BSN body-10 phi with wheel 1 / 13 with a phi shaft Nyusofu2 strap-25 phi foil-Nyusofu trap (# 240, # 320, # 400, # 600, # 800, 1000, 1500 1 of each), with Stepin, spanner 1 each, air hose (1.5 m) 1 book ,over hose , filter 1 internal hose joint, case
Category Grinder > Micro Grinder
Mini Grinder
CUSTOR
4.00(2)
81.99 SGD
ADD TO CART
Collet Diameter (phimm): 6.0(1/4), Compatible Air Pressure: recommended 6.3 (90 psig), Exhaust System: Rear exhaust-, Air Inlet: NPT1/4, Air Consumption (m2/min): 0.24, Dimensions (Width x Length) (mm): 65x152, Hose Inner-Diameter (phi mm): More than 6.5, No Load Rotation Speed (min-1[r.p.m]): 25000, Weight (g): 360, Specification: Safety lever system
Category Grinder > Micro Grinder
Micro Air Grinder
TRUSCO
5.00(1)
259.99 SGD
ADD TO CART
Air Consumption (m3/min): 0.15, Working Pressure (MPa): 0.4 to 0.6, Chuck Bore (phi mm): 3, No Load Rotation Speed (min-1[r.p.m]): 60000, Weight (g): 108, Overall Length (mm): 155, TRUSCO Part Number: 301-9128, Specification: Hose inlet/One touch P plug, exhaust method/backward
Category Grinder > Micro Grinder
Micro Angle Grinder
UHT
409.99 SGD
ADD TO CART
Hose Connection Diameter: PT 1/4, Shank Axis: 3mm, Exhaust System: Backwards, Air Consumption (NL/min): 120, Supply Air Pressure (MPa): 0.6, Body Weight (g): 140, Switching Method: Grip control valve, Maximum Rotation Speed (min-1[r. p.m]): 52500, Type: 120 degree angle type, Height (mm): 78, Overall Length (mm): 107, Application: For precise grinding and polishing job
Category Grinder > Angle Grinders
Grinder
URYU SEISAKU
259.99 SGD
ADD TO CART
Noise Level (dB(A)): 85, Recommended Hose Diameter (mm): 9.5, Hose Mouthpiece Mounting Screw: PT1/4, Length from Shaft to Side (mm): About 17.0, Collet Chuck Dimensions (mm): 6, Air Consumption (m3/min): About 0.4 (air pressure 0.6MPa at the time of no load), No Load Rotation Speed (min-1[r.p.m]): 25000 (highest), Weight (kg): About 0.54 (with no whetstone), Overall Length (mm): About 164 (with no whetstone), TRUSCO Part Number: 211-6006, Specification: Collet chuck: Zipper CP for 6-mm shaft (with chuck nut)
Category Grinder > Straight Grinder
Micro Air Grinder
Super Tool
5.00(1)
309.99 - 409.99 SGD
Exhaust System: Backward, Supply Air Pressure (MPa): 0.6
Category Grinder > Micro Grinder
Micro Air Grinder GEM NEW MOTOR
Gem
5.00(1)
369.99 SGD
ADD TO CART
Purpose: Metal precise finishing. After-treatment of the deburring, molding, grinding, sculpture and internal processing of metal. Cutting work and grinding processing of lumber, stone and plastic etc. After the welding surface finish., Air Consumption (L/minANR): 160, Supply Air Pressure (MPa): 0.5(+0.2/-0.1), Throttle System: ON-OFF VALVE, Chucking Ability (mm): phi3, Maximum Rotation Speed (min-1[r. p.m]): 60000, Weight (g): 100, Overall Length (mm): 137 (Without hose), Accessories: Collet (phi 3) / 1 piece Air hose phi5.8 (inner diameter) x phi8.5 (outer diameter) x 1.5 m (length)/1 piece Exhaust hose 0.5m (length) 1 piece Box spanner, (6mm)/1 piece Grip wrench, (8 mm)/1 piece Mule, sleep (phi 20 mm)/1 piece Tool box/1 piece
Category Grinder > Micro Grinder
Air Angle Grinder
YANASE
5.00(1)
269.99 SGD
ADD TO CART
Exhaust Direction: Side, Size (mm): (Disk) phi58x10, Air Consumption (m3/min): 0.6, Working Pressure (MPa): 0.44 - 0.58, Revolution (min-1[r.p.m]): 22000, Weight (g): 530, Overall Length (mm): 140, Accessories: TOP minidisk #40, #60, #120 1 each regulator, coupler, replacement wrench, Allen wrench, each one
Category Grinder > Angle Grinders
Mini Angle Grinder
CUSTOR
5.00(2)
119.99 SGD
ADD TO CART
Collet Diameter (phimm): 6.0(1/4), Compatible Air Pressure: recommended 6.3 (90 psig), Exhaust System: Rear exhaust-, Air Inlet: NPT1/4, Air Consumption (m2/min): 0.24, Outer Dimensions (Length L x Width W x Height H) (mm): 155x65x75, Hose Inner-Diameter (phi mm): More than 6.5, No Load Rotation Speed (min-1[r.p.m]): 22000, Weight (g): 540, Specification: Safety lever system
Category Grinder > Angle Grinders
Micro Angle Grinder
UHT
4.00(1)
409.99 - 419.99 SGD
Hose Connection Diameter: PT 1/4, Air Consumption (NL/min): 120, Supply Air Pressure (MPa): 0.6, Switching Method: Grip control valve, Application: For smoothness grinding and polishing work
Category Grinder > Angle Grinders
Micro Air Grinder, Mach Motor,
Gem
359.99 SGD
ADD TO CART
Purpose: Metal precise finishing. After-treatment of the deburring, molding, grinding, sculpture and internal processing of metal. Cutting work and grinding processing of lumber, stone and plastic etc. After the welding surface finish., Exhaust System: Back, Hose Connection Port (air source side): R1/4, Air Consumption (L/minANR): 180, Supply Air Pressure (MPa): 0.5(+0.2/-0.1), Throttle System: ON-OFF VALVE, Chucking Ability (mm): phi3, Maximum Rotation Speed (min-1[r. p.m]): 60000, Weight (g): 140, Overall Length (mm): 144, Accessories: air hose diameter phi5.8 (inner diameter) x phi8.5 mm (outer diameter) x 1.5 m (length) / 1 piece Exhaust hose / 1 piece Pintor (phi3 mm) / 1 piece Open ended wrench (for 8 mm for) / 1 piece
Category Grinder > Micro Grinder
Air Micro Grinder
NITTO KOHKI
409.99 SGD
ADD TO CART
2014 TRUSCO Published Page: 2-1542, Chuck Diameter (mm phi): 3, Working Pressure (MPa [kgf/cm2]): 0.59[6], Air Consumption (m3/min): 0.17, No Load Rotation Speed (min-1[r.p.m]): 56500, Weight (kg): 0.25, Overall Length (mm): 128.5, Type: Pneumatic micro grinder, TRUSCO Part Number: 116-6191, Specification: Wiht rotation speed adjuster, Accessories: Wheel grinder: 5x13x3mmx1 this spanner: 7x9mmx2 this coupler: HA-65SNx1 pieces
Category Grinder > Micro Grinder
Grinder
URYU SEISAKU
5.00(1)
269.99 SGD
ADD TO CART
Noise Level (dB(A)): 85, Recommended Hose Diameter (mm): 9.5, Hose Mouthpiece Mounting Screw: PT1/4, Length from Shaft to Side (mm): About 17.0, Collet Chuck Dimensions (mm): 6, Air Consumption (m3/min): About 0.4 (air pressure 0.6MPa at the time of no load), No Load Rotation Speed (min-1[r.p.m]): 25000 (highest), Weight (kg): About 0.56 (with no whetstone), Overall Length (mm): About 174 (with no whetstone), TRUSCO Part Number: 211-6014, Specification: Collet chuck: Zipper CP for 6-mm shaft (with chuck nut)
Category Grinder > Straight Grinder
Sonic Air
NITTO KOHKI
4.50(2)
389.99 SGD
ADD TO CART
Purpose: Only for a whetstone, Chuck Diameter (mm phi): 6, Working Pressure (MPa [kgf/cm2]): 0.59[6], Air Consumption (m3/min): 0.4, No Load Rotation Speed (min-1[r.p.m]): 27000, Weight (kg): 0.6, Overall Length (mm): 135.5, Type: Air-operated die grinder, TRUSCO Part Number: 116-6336, Accessories: Whetstone No.2 (phi17x32mm) 1 No.3 (phi19x20mm) 1 zipper pin 1 spanner 14mm 1 coupler 200-30SH 1
Category Grinder > Micro Grinder
Air Angle Grinder, 50mm
YoshidaTools
5.00(3)
279.99 SGD
ADD TO CART
Head Height (mm): 47, Air Consumption (Nm3/min): (No load) 0.47, Recommended Hose Diameter (mm): 9.5, Rolling Speed of No-load (min-1[r.p.m]): 15000, Grinding Wheel Dimensions (mm): 50x4x9.5, Screw Dimensions: (Air inlet) RC1 / 4, System: (Handle) roll, Maximum Peripheral Velocity (m/min): (Wheels) 4300, Weight (kg): (Toishikaba with) 0.645, Overall Length (mm): 156, Accessories: Coupler plug NL-22PM
Category Grinder > Angle Grinders
6mm Air Die Grinder
ESCO
4.25(4)
59.99 SGD
ADD TO CART
Suction Port Size: 1/4inchPT, Indispensability Compressor (kw): 1.5 to 2.2, Air Consumption (L/min): 228, Maximum Speed (min-1[r. p.m]): 25000, Working Pressure (MPa): 0.64, Chuck Dimension (inch): 1/4(6mm), Weight (g): 380, Overall Length (mm): 155, ESCO Part Number: EA159DN-2
Category Grinder > Straight Grinder
Air Grinder
ANEST IWATA CAMPBELL
4.50(6)
98.99 SGD
ADD TO CART
Collet Chuck Dimensions (mm): phi3.18, 6.0, 6.35, Maximum Working Pressure (MPa): 0.59, Air Consumption (L/min): 230, Body Dimensions (Length x Width x Height) (mm): 125x47x33, No Load Rotation Speed (min-1[r.p.m]): 25000, Weight (kg): 0.34
Category Grinder > Straight Grinder
Marking Pen
WEN
539.99 SGD
ADD TO CART
Purpose: Engraving on various metals and glass. Make groove to remove broken tap. To remove sand and dust enter in complex places such as small casting hole etc., Using Air Pressure (kg/cm2): 4 to 7, Unit Length (mm): 160, Frequency: 500-600 strokes per minute, Body Size (phi mm): 17.3, Air Consumption (m3/min): 0.025, Weight (g): 170, Type: Pneumatic
Category Grinder > Micro Grinder
Midget Grinder
YOKOTA INDUSTRIAL
239.99 - 259.99 SGD
2014 TRUSCO Published Page: 2-1551, Use Hose Diameter (mm): 9.5, Hose Mouthpiece Mounting Screw: 1/4Rc, Air Pressure (MPa): 0.6, Specification: Exhaust direction: forward, Accessories: Spanner (two), touch joint (1)
Category Grinder > Straight Grinder
100phi Angle Grinder
YoshidaTools
369.99 SGD
ADD TO CART
Purpose: Finish of welding surface, groove drilling, rust removal, deburring, etc., Head Height (mm): 57.5, Air Consumption (Nm3/min): (Maximum) 0.40, Recommended Hose Diameter (mm): 9.5, Rolling Speed of No-load (min-1[r.p.m]): 13000, Handle: Roll method, Grinding Wheel Dimensions (mm): 100 x 2 to 6 x 15, Screw Dimensions: (Hose cap) RC1 / 4, Maximum Peripheral Velocity (m/min): Wheels / 4300, Weight (kg): 0.97, Overall Length (mm): 179, Accessories: 32Hex box wrench, 6Hex hex wrench, 5Hex hex wrench, coupler plug NL-22PM
Category Grinder > Angle Grinders
Pneumatic mini grinder air sky
NEW REGISTON
419.99 SGD
Caution: * When using a grinding wheel with a grindstone diameter of 50 mm or more, be sure to use GR - M 58 (75) R and Mini Super Green., Purpose: Grinding and polishing of details and narrow parts can be worked effectively., Rolling Speed of No-load (min-1[r.p.m]): 12500, Grip Diameter (phi mm): 36, Working Pressure (MPa [kgf/cm2]): 0.6[6], Air Consumption (m3/min): 0.54, Noise Level (dB): 85, Grinding Wheel Dimensions (mm): 58x3.5x9.53/75x4x9.53, Overall Length (mm): 160
Category Grinder > Angle Grinders
Air Sonic
NITTO KOHKI
429.99 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Chuck Diameter (mm phi): 6, Working Pressure (MPa [kgf/cm2]): 0.59[6], Air Consumption (m3/min): 0.4, No Load Rotation Speed (min-1[r.p.m]): 27000, Weight (kg): 0.6, Overall Length (mm): 135.5, TRUSCO Part Number: 116-6352
Category Grinder > Micro Grinder
MYTON
NITTO KOHKI
629.99 SGD
Purpose: Light grinding work, Working Pressure (MPa [kgf/cm2]): 0.59[6], Hole Diameter (phi mm): 16
Category Grinder > Disc Grinder
Air Sonic
NITTO KOHKI
5.00(1)
529.99 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Chuck Diameter (mm phi): 6, Working Pressure (MPa [kgf/cm2]): 0.59[6], Air Consumption (m3/min): 0.35, No Load Rotation Speed (min-1[r.p.m]): 37500, Weight (kg): 0.45, Overall Length (mm): 170.7, TRUSCO Part Number: 116-6344
Category Grinder > Micro Grinder
Air Sonic
NITTO KOHKI
539.99 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Chuck Diameter (mm phi): 6, Working Pressure (MPa [kgf/cm2]): 0.59[6], Air Consumption (m3/min): 0.35, No Load Rotation Speed (min-1[r.p.m]): 37500, Weight (kg): 0.45, Overall Length (mm): 168, TRUSCO Part Number: 116-6361
Category Grinder > Micro Grinder
Micro straight grinder
UHT
479.99 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Supply Air Pressure (kgf/cm3): 6+/-1, Hose Connection Diameter: PT 1/4, Shank Axis: 2.4mm, Air Consumption (NL/min): 120, Body Weight (g): 130, Maximum Rotation Speed (min-1[r. p.m]): 65000, TRUSCO Part Number: 143-2842
Category Grinder > Straight Grinder
New motor
Gem
579.99 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Air Consumption (NL/min): 250, Hose Connection Port (air source side): R1/4, Body Weight (g): 280, Maximum Rotation Speed (min-1[r. p.m]): 35000, Overall Length (mm): 173, TRUSCO Part Number: 107-1475
Category Grinder > Micro Grinder
Baby grinder (precision grinding / grinding 3 mm axis)
YoshidaTools
179.99 SGD
Purpose: Castings, die casting, various mold finishing, light deburring etc., Recommended Hose Diameter (mm): 9.5, Rolling Speed of No-load (min-1[r.p.m]): 30000, Maximum External Diameter (mm): 33, Collet Size (mm): 3
Category Grinder > Micro Grinder
Baby Grinder 6mm
YoshidaTools
5.00(4)
179.99 - 189.99 SGD
Purpose: Finishing casting product and di-cast mold. Light deburring., Air Consumption (Nm3/min): (No load) 0.47, Recommended Hose Diameter (mm): 9.5, Rolling Speed of No-load (min-1[r.p.m]): 22000, Maximum External Diameter (mm): 37, Collet Size (mm): 6, Accessories: Coupler plug NL-22PM
Category Grinder > Micro Grinder
Baby Angle Grinder (100mm)
YoshidaTools
5.00(2)
349.99 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Head Height (mm): 77, Recommended Hose Diameter (mm): 9.5, Rolling Speed of No-load (min-1[r.p.m]): 13500, Grinding Wheel Dimensions (mm): 100x6x15, Overall Length (mm): 216
Category Grinder > Angle Grinders

1 2 3 4 5 6 7 8 9 Next