Buy more than* S$200* and get FREE SHIPPING

Gas Blow-Welding

Sort by:
Showing 1 - 90 of 243 Results
Show: 30 60 90
VIEW: Grid View List View
Manual Cutting Tip Nozzle
NISSAN TANAKA
19.99 SGD
Compatible: Tanaka small LPG cutting torch Tanaka medium LPG cutting torch, Gas: Propane
Category Gas Blow-Welding > Blowpipe and Welding Tip > crater
Small Welding Machine
SAKAGUCHI
4.50(4)
149.90 SGD
ADD TO CART
Accessories: Five (No.50, 70, 100, 140, 200 1 each), Overall Length (mm): 370, Weight (g): 510, Gas: Acetylene type, Welding Capability (mm): 0.5 - 3, Purpose: For welding of 5 mm of sheet metal, For welding of 5 mm of sheet metal
Category Gas Blow-Welding > Blowpipe and Welding Tip > Welding Devices
Medium Size Cutting Tip
NISSAN TANAKA
4.00(7)
11.99 SGD
Gas: Acetylene
Category Gas Blow-Welding > Blowpipe and Welding Tip > crater
A Type Cutting Tip Nozzle
NISSAN TANAKA
5.00(1)
16.99 SGD
Gas: Acetylene
Category Gas Blow-Welding > Blowpipe and Welding Tip > crater
A Type Cutting Instrument, Acetylene Cutting Machine
CHIYODA SEIKI
259.90 SGD
ADD TO CART
Accessories: Burner: Three pieces, Specification: For acetylene, Type: A type cutting instrument (1 form No. 2) and a low voltage type, Overall Length (mm): 535, Weight (g): Torch: 850 / burner: 125, Gas Name: Acetylene, Sheet Thickness (mm): No.1:5 - 15 No.2:10 - 25 No.3:20 - 50, Burner: No.1/No.2/No.3, Burner Diameter (mm): No.1: phi 1.0 No.2: phi 1.3 No.3: phi 1.6, Gas Pressure (Mpa): oxygen: 0.4/acetylene: 0.04, Using Blowpipe: A OFF, glitter A, new glitter A cutting instrument
Category Gas Blow-Welding > Blowpipe and Welding Tip > Cutting Device, Fusing Device
Oxygen Cutting Tool
KOIKE SANSO KOGYO
5.00(3)
879.90 SGD
Category Gas Blow-Welding > Blowpipe and Welding Tip > Cutting Device, Fusing Device
A Type Cutting Nozzle
MonotaRO
11.99 SGD
Overall Length (mm): 530, Weight (g): 880, Mounting Screw: W16x20 ridges, Gas: Acetylene, Using Blowpipe: A-type cutting instrument
Category Gas Blow-Welding > Blowpipe and Welding Tip > crater
Tip Nozzle
YAMATO SANGYO
4.00(3)
14.99 SGD
Category Gas Blow-Welding > Blowpipe and Welding Tip > crater
Medium-Sized Cutting Intsrument
MonotaRO
149.90 SGD
ADD TO CART
Set Contents: CRATER NUMBER (M1, M2, M3), Cleavable Range: M1:1 - 5mm M2:5 - 15mm M3:15 - 30mm, Gas: Acetylene, Gas Pressure (Mpa): (Oxygen) is 0.03 0.35 (Acetylene) M1 M1 0.03/M3 0.03/M2 0.3/M3 0.25/M2, Gas Consumption (L/h): (Cutting Oxygen) is 300 330 (Acetylene) M1 2000 (Preheating Oxygen) M1 M1 230/M3 200/M2 250/M3 220/M2 1200/M3 700/M2, Precautions for Use: Clean vent with cleaning needle dedicated nozzle diligently after use to arrest backfire., Catch-Phrase: Efficiency *, price *, it is the cutter which is recommend by adoption officer
Category Gas Blow-Welding > Blowpipe and Welding Tip > Cutting Device, Fusing Device
Medium Cutting Machine, Z Novak
NISSAN TANAKA
5.00(1)
199.90 - 229.90 SGD
Category Gas Blow-Welding > Blowpipe and Welding Tip > Cutting Device, Fusing Device
Medium-Sized Cutting Intsrument Tip Nozzle
CHIYODA SEIKI
4.50(4)
16.99 SGD
Compatible: 12MT, Model: Medium-sized, Weight (g): 65
Category Gas Blow-Welding > Blowpipe and Welding Tip > crater
Medium-Type Welding Machine
SAKAGUCHI
5.00(2)
169.90 SGD
ADD TO CART
Accessories: 7 (No.200, 225, 250, 315, 400, 450, 500 one each), Overall Length (mm): 420, Weight (g): 515, Gas: Acetylene type, Welding Capability (mm): 1 - 8, Purpose: Welding medium thickness plates., Welding medium thickness plates.
Category Gas Blow-Welding > Blowpipe and Welding Tip > Welding Devices
CPL-Midium Size Cutter, Propane Cutter
CHIYODA SEIKI
229.90 SGD
ADD TO CART
Accessories: Burner: Three pieces, Specification: For propane, Type: CPL-medium type cutter (1 shapes 1) low pressure system, Overall Length (mm): 460, Weight (g): blowpipe: 640 / burner: 70, Gas Name: Propane, Sheet Thickness (mm): No.1:3 - 7 No.2:5 - 15 No.3:10 - 20, Burner: No.1/No.2/No.3, Burner Diameter (mm): No.1: phi 0.0 No.2: phi 0.3 No.3: phi 1.1, Gas Pressure (Mpa): Oxygen :0.25/ propane: 0.03, Using Blowpipe: BREAKER, GLITTER M, new glitter M CUTTING INSTRUMENT
Category Gas Blow-Welding > Blowpipe and Welding Tip > Cutting Device, Fusing Device
A-Type Cutting Instrument
SAKAGUCHI
4.50(4)
159.90 SGD
ADD TO CART
Accessories: Burner 1, 2, 3, Overall Length (mm): 530, Weight (g): 880, Cutting Capability (mm): 5 - 50, Gas: Acetylene type, Purpose: For cutting work, For cutting work
Category Gas Blow-Welding > Blowpipe and Welding Tip > Cutting Device, Fusing Device
No. 00 Welding Machine
SAKAGUCHI
4.00(3)
129.90 SGD
ADD TO CART
Accessories: Four (No.10, 16, 25, 40 1 each), Overall Length (mm): 320, Weight (g): 330, Gas: Acetylene type, Welding Capability (mm): 0.1 - 1, Purpose: For thin brazing welding, For thin brazing welding
Category Gas Blow-Welding > Blowpipe and Welding Tip > Welding Devices
Cutting Tip, Old Type
MonotaRO
7.99 SGD
Mounting Screw: W13.5x24 ridges, Gas: Acetylene - oxygen, Gas Pressure (Mpa): (O2)0.2 (C2H2)0.02 - 0.03, Catch-Phrase: Domestic maker collaboration product, quality guaranteed. Economically priced cutting burner!!
Category Gas Blow-Welding > Blowpipe and Welding Tip > crater
Small Welding Machine, Acetylene Welding Machine
CHIYODA SEIKI
259.90 SGD
ADD TO CART
Accessories: Crater: Five, Specification: For acetylene, Type: Small welding machine (B form No. 0) and a low voltage type, Overall Length (mm): 380, Weight (g): Blowpipe : -- 480-/crater: -- 25, Burner: No.50, No.70, No.100, No.140, No.200, Burner Diameter (mm): No.50:phi0.7 No.70:phi0.8 No.100:phi0.9 No.140:phi1.0 No.200:phi1.2, Gas Pressure (Mpa): oxygen: -- 0.2-/acetylene: -- 0.02, Using Blowpipe: Small size pistol type welding machine and glitter SW type
Category Gas Blow-Welding > Blowpipe and Welding Tip > Welding Devices
Welder Hose Joints
SAKAGUCHI
6.69 SGD
Compatible: WT-01
Category Gas Blow-Welding > Blowpipe and Welding Tip > Parts
Welding Heating Crater
NISSAN TANAKA
64.99 - 109.90 SGD
Gas: Acetylene
Category Gas Blow-Welding > Blowpipe and Welding Tip > crater
A Issue Cutting Instrument Z Novak
NISSAN TANAKA
289.90 SGD
ADD TO CART
Accessories: Burner No.1 to No.3 with each one, Compatible: 1220 N CRATER, Overall Length (mm): 517, Weight (g): 790, Connection: Shape For oxygen: JIS No. 2 horse mouth FUEL GAS: JIS NO. 3 HOSE, Sheet Thickness (mm): #1 3 - 15, #2 15 - 40, #3 40 - 80, Gas: Acetylene, Gas Consumption (NL/h): 1220 N-1A: cutting oxygen 1600, preheating oxygen 370, fuel gas 340 1220 N-2A: cutting oxygen 2600, preheating oxygen 480, fuel gas 440 1220 N-3A: cutting oxygen 4800, preheating oxygen 590 and fuel gas 540, Gas Pressure (MPa[kgf/cm2]): Oxygen: 0.3 [3.0] Fuel gas: 0.03-0.05 [0.3-0.5]
Category Gas Blow-Welding > Blowpipe and Welding Tip > Cutting Device, Fusing Device
Short size welding device
ESCO
229.90 - 339.90 SGD
Category Gas Blow-Welding > Blowpipe and Welding Tip > Welding Devices
Large cutter
YAMATO SANGYO
289.90 SGD
ADD TO CART
Overall Length (mm): 550, Weight (g): 950, Cutting Capability (mm): 1-10, Caution: * by the cutting ability of the plate thickness of the processed iron plate base material, choose a medium-sized or large A No. cutting instrument.  * medium-sized crater in the medium-sized cutting instrument, please take A No. crater in the large A No. , This product is manufactured in Japanese standards. Please check the specification before you order., * by the cutting ability of the plate thickness of the processed iron plate base material, choose a medium-sized or large A No. cutting instrument.  * medium-sized crater in the medium-sized cutting instrument, please take A No. crater in the large A No. cutting instrument. (Size is different), This product is manufactured in Japanese standards. Please che...
Category Gas Blow-Welding > Blowpipe and Welding Tip > Cutting Device, Fusing Device
Tip Nozzle
YAMATO SANGYO
24.99 SGD
Category Gas Blow-Welding > Blowpipe and Welding Tip > crater
Auto Cutting Tip Nozzle
KOIKE SANSO KOGYO
75.99 SGD
Pressure (kg/cm2): 0.2, Gas: Acetylene
Category Gas Blow-Welding > Blowpipe and Welding Tip > crater
Portable automatic gas cutting machine
KOIKE SANSO KOGYO
1,999.00 SGD
ADD TO CART
Overall Length (mm): 500, Weight (kg): 2.7, Cycle(Hz): 50/60, Power (V): AC100/110, Sheet Thickness (mm): 5-30, Running Speed (mm/min): 150-530, Caution: This product is manufactured in Japanese standards. Please check the specification before you order., This product is manufactured in Japanese standards. Please check the specification before you order.
Category Gas Blow-Welding > Blowpipe and Welding Tip > Cutting Device, Fusing Device
Small-Type Welding Burner
SAKAGUCHI
4.00(2)
24.99 - 59.99 SGD
Gas: Acetylene
Category Gas Blow-Welding > Blowpipe and Welding Tip > crater
Sharp lance holder
Oxygen Arc Industry
889.90 SGD
ADD TO CART
Category Gas Blow-Welding > Fusing Holders
Medium welder
NISSAN TANAKA
279.90 SGD
ADD TO CART
Overall Length (mm): 465, Caution: This product is manufactured in Japanese standards. Please check the specification before you order., This product is manufactured in Japanese standards. Please check the specification before you order.
Category Gas Blow-Welding > Blowpipe and Welding Tip > Welding Devices
Short size welder (coupler set)
BBK (Bunkaboeki Kogyo)
249.90 SGD
ADD TO CART
Overall Length (mm): 278, Caution: This product is manufactured in Japanese standards. Please check the specification before you order., This product is manufactured in Japanese standards. Please check the specification before you order.
Category Gas Blow-Welding > Blowpipe and Welding Tip > Welding Devices
Automatic cutting crater (acetylene)
NISSAN TANAKA
75.99 - 129.90 SGD
Overall Length (mm): 90
Category Gas Blow-Welding > Blowpipe and Welding Tip > crater
Welding fusing machine set
ESCO
2,499.00 - 2,599.00 SGD
Category Gas Blow-Welding > Welding and Fusion Cutting Sets
Medium-Sized Cutter, Acetylene Cutter
CHIYODA SEIKI
5.00(2)
229.90 SGD
ADD TO CART
Accessories: Burner: Three pieces, Specification: For acetylene, Type: A type cutting instrument (1 form No. 1) and a low voltage type, Overall Length (mm): 460, Weight (g): blowpipe: 640 / burner: 65, Gas Name: Acetylene, Sheet Thickness (mm): No.1:3 - 7 No.2:5 - 15 No.3:10 - 20, Burner: No.1/No.2/No.3, Burner Diameter (mm): No.1: phi 0.0 No.2: phi 0.3 No.3: phi 1.1, Gas Pressure (Mpa): oxygen: 0.25/acetylene: 0.03, Using Blowpipe: BREAKER, GLITTER M, new glitter M CUTTING INSTRUMENT
Category Gas Blow-Welding > Blowpipe and Welding Tip > Cutting Device, Fusing Device
3.2mm cutting bar
ESCO
5.00(1)
119.90 SGD
ADD TO CART
ESCO Part Number: EA318B-3.2, Caution: This product is manufactured in Japanese standards. Please check the specification before you order., This product is manufactured in Japanese standards. Please check the specification before you order.
Category Gas Blow-Welding > Cutting Bar, Fusing Bar
Short size welding device [coupler plug luck]
ESCO
259.90 SGD
ADD TO CART
ESCO Part Number: EA300-4B, Caution: This product is manufactured in Japanese standards. Please check the specification before you order., This product is manufactured in Japanese standards. Please check the specification before you order.
Category Gas Blow-Welding > Blowpipe and Welding Tip > Welding Devices
Mini welding machine
ESCO
1,399.00 SGD
ADD TO CART
ESCO Part Number: EA300MB, Caution: This product is manufactured in Japanese standards. Please check the specification before you order., This product is manufactured in Japanese standards. Please check the specification before you order.
Category Gas Blow-Welding > Blowpipe and Welding Tip > Welding Devices
Caravan pack (no gas)
SAKAGUCHI
5.00(1)
2,799.00 SGD
ADD TO CART
Weight (kg): 31.2, Outer Dimensions (Width W x Height H x Depth D) (mm): 460x890x280, Caution: This product is manufactured in Japanese standards. Please check the specification before you order., This product is manufactured in Japanese standards. Please check the specification before you order.
Category Gas Blow-Welding > Welding and Fusion Cutting Sets
Acetylene Welding Machine
CHIYODA SEIKI
289.90 SGD
ADD TO CART
Accessories: Crater: 7, Specification: For acetylene, Type: Medium-sized cutter (B-type 01 issue) low-pressure, Overall Length (mm): 435, Weight (g): Blowpipe: 490 / crater: 25, Burner: No.200 No.225 No.250 No.315 No.400 No.450 No.500, Burner Diameter (mm): No.200:phi1.2No.225:phi1.3No.250:phi1.4No.315:phi1.5No.400:phi1.6No.450:phi1.7No.500:phi1.8, Gas Pressure (Mpa): Oxygen: 0.3 / acetylene: 0.03, Using Blowpipe: Medium-sized, glitter MW type
Category Gas Blow-Welding > Blowpipe and Welding Tip > Welding Devices
Cutting Tip LPG
NISSAN TANAKA
5.00(1)
38.99 SGD
Compatible: Q512Z, Weight (g): 125, 2014 TRUSCO Published Page: 2-2562, Purpose: To cut LPG steel plate, To cut LPG steel plate
Category Gas Blow-Welding > Blowpipe and Welding Tip > crater
Medium size welding machine
YAMATO SANGYO
259.90 SGD
ADD TO CART
TRUSCO Part Number: 281-6024, Weight (g): 520, Welding Capability (mm): 2.0-6.0, Purpose: For metal heating. For gas welding and brazing., For metal heating. For gas welding and brazing., Caution: *There is no difference between Kansai and Kanto ceremonies for N-YW-4., *There is no difference between Kansai and Kanto ceremonies for N-YW-4.
Category Gas Blow-Welding > Blowpipe and Welding Tip > Welding Devices
CPL-A type cutter (propane cutter)
CHIYODA SEIKI
329.90 SGD
ADD TO CART
Overall Length (mm): 535, Burner: No.1/No.2/No.3, Caution: This product is manufactured in Japanese standards. Please check the specification before you order., This product is manufactured in Japanese standards. Please check the specification before you order.
Category Gas Blow-Welding > Blowpipe and Welding Tip > Cutting Device, Fusing Device
Tochibonbe stand
SK-11
4.50(2)
4.89 SGD
ADD TO CART
Width (mm): 98, Height (mm): 28, Weight (g): 18, Depth (mm): 88, Tilt Angle (Degree): 5, Purpose: Fall prevention of Tochibonbe., Fall prevention of Tochibonbe., Caution: This product is manufactured in Japanese standards. Please check the specification before you order., This product is manufactured in Japanese standards. Please check the specification before you order.
Category Gas Blow-Welding > Cylinder Stand
Mill Crater
SAKAGUCHI
5.00(3)
13.99 SGD
Category Gas Blow-Welding > Blowpipe and Welding Tip > crater
Medium cutter Deposit (acetylene)
SAKAGUCHI
179.90 SGD
ADD TO CART
Overall Length (mm): 450, Weight (g): 720, Cutting Capability (mm): 1-30, Nozzle No.: 1.2.3, Caution: This product is manufactured in Japanese standards. Please check the specification before you order., This product is manufactured in Japanese standards. Please check the specification before you order.
Category Gas Blow-Welding > Blowpipe and Welding Tip > Cutting Device, Fusing Device
Diffusion type heater SK-S
YAMATO SANGYO
399.90 SGD
ADD TO CART
TRUSCO Part Number: 434-5011, Caution: This product is manufactured in Japanese standards. Please check the specification before you order., This product is manufactured in Japanese standards. Please check the specification before you order.
Category Gas Blow-Welding > Blowpipe and Welding Tip > A heater
A-type cutting tip (acetylene)
SAKAGUCHI
15.99 SGD
Category Gas Blow-Welding > Blowpipe and Welding Tip > crater
Road marking sign monthly
Shinfuji Burner
29.99 SGD
ADD TO CART
TRUSCO Part Number: 495-3703, Caution: This product is manufactured in Japanese standards. Please check the specification before you order., This product is manufactured in Japanese standards. Please check the specification before you order.
Category Gas Blow-Welding > Road Marking
Crater 6950
NISSAN TANAKA
58.99 SGD
Plate Thickness (mm): 12-50, Mounting Screw: W12-24, Nozzle Total Length (mm): 75.5
Category Gas Blow-Welding > Blowpipe and Welding Tip > crater
Crater 3040 G
NISSAN TANAKA
77.99 - 129.90 SGD
Nozzle Total Length (mm): 90
Category Gas Blow-Welding > Blowpipe and Welding Tip > crater
Crater 6120
NISSAN TANAKA
9.29 - 76.99 SGD
Mounting Screw: W3/16-24, Nozzle Total Length (mm): 21.5
Category Gas Blow-Welding > Blowpipe and Welding Tip > crater
Crater 6150D
NISSAN TANAKA
19.99 SGD
Mounting Screw: M4x0.5, Nozzle Total Length (mm): 18.5
Category Gas Blow-Welding > Blowpipe and Welding Tip > crater
Crater 6220
NISSAN TANAKA
9.59 SGD
Mounting Screw: W7.5-28, Nozzle Total Length (mm): 35
Category Gas Blow-Welding > Blowpipe and Welding Tip > crater
Crater 6620
NISSAN TANAKA
95.99 SGD
Mounting Screw: W18.5-19, W18.5-19, Nozzle Total Length (mm): 144, 144
Category Gas Blow-Welding > Blowpipe and Welding Tip > crater
Crater 6420
NISSAN TANAKA
64.99 SGD
Mounting Screw: W14-19
Category Gas Blow-Welding > Blowpipe and Welding Tip > crater
Crater 1320N
NISSAN TANAKA
64.99 SGD
Mounting Screw: W16-20, Nozzle Total Length (mm): 94
Category Gas Blow-Welding > Blowpipe and Welding Tip > crater
Crater 3051
NISSAN TANAKA
64.99 SGD
Nozzle Total Length (mm): 92
Category Gas Blow-Welding > Blowpipe and Welding Tip > crater
Crater 6550
NISSAN TANAKA
87.99 SGD
Plate Thickness (mm): 5-25, Mounting Screw: W17-19, Nozzle Total Length (mm): 129
Category Gas Blow-Welding > Blowpipe and Welding Tip > crater
Crater 1520 L
NISSAN TANAKA
229.90 SGD
Mounting Screw: W16-20, Nozzle Total Length (mm): 111
Category Gas Blow-Welding > Blowpipe and Welding Tip > crater
Crater 1520
NISSAN TANAKA
229.90 SGD
Mounting Screw: W18-20, W18-20, W18-20, Nozzle Total Length (mm): 102, 102, 102
Category Gas Blow-Welding > Blowpipe and Welding Tip > crater
Crater 3240 G
NISSAN TANAKA
29.99 - 75.99 SGD
Nozzle Total Length (mm): 75
Category Gas Blow-Welding > Blowpipe and Welding Tip > crater
Crater 6250
NISSAN TANAKA
46.99 SGD
Plate Thickness (mm): 0.5-2.5, Mounting Screw: W7.5-28, Nozzle Total Length (mm): 37, Caution: This product is manufactured in Japanese standards. Please check the specification before you order., This product is manufactured in Japanese standards. Please check the specification before you order.
Category Gas Blow-Welding > Blowpipe and Welding Tip > crater
Crater 6820
NISSAN TANAKA
24.99 - 169.90 SGD
Mounting Screw: W12-W20, Nozzle Total Length (mm): 52, Caution: This product is manufactured in Japanese standards. Please check the specification before you order., This product is manufactured in Japanese standards. Please check the specification before you order.
Category Gas Blow-Welding > Blowpipe and Welding Tip > crater
Crater 6951
NISSAN TANAKA
56.99 SGD
Plate Thickness (mm): 5-50, Mounting Screw: G1/4, Nozzle Total Length (mm): 61
Category Gas Blow-Welding > Blowpipe and Welding Tip > crater
Crater 7450
NISSAN TANAKA
129.90 SGD
ADD TO CART
Mounting Screw: W14-24, Nozzle Total Length (mm): 42.5
Category Gas Blow-Welding > Blowpipe and Welding Tip > crater
Crater 1180N
NISSAN TANAKA
35.99 SGD
Mounting Screw: W13.5-24, Nozzle Total Length (mm): 73, Caution: This product is manufactured in Japanese standards. Please check the specification before you order., This product is manufactured in Japanese standards. Please check the specification before you order.
Category Gas Blow-Welding > Blowpipe and Welding Tip > crater
Crater 1351N
NISSAN TANAKA
64.99 SGD
Mounting Screw: W16-20, Nozzle Total Length (mm): 94
Category Gas Blow-Welding > Blowpipe and Welding Tip > crater
Peter cutter mini set
Petrocutter
2,899.00 - 3,299.00 SGD
Category Gas Blow-Welding > Blowpipe and Welding Tip > Cutting Device, Fusing Device
crater
Petrocutter
4.00(1)
96.99 - 289.90 SGD
Category Gas Blow-Welding > Blowpipe and Welding Tip > crater
Crater 6320
NISSAN TANAKA
14.99 - 119.90 SGD
Category Gas Blow-Welding > Blowpipe and Welding Tip > crater
A off C2H2 crater
KOIKE SANSO KOGYO
22.99 SGD
Gas Pressure (Mpa): (LPG)0.02, Caution: * Please confirm that the hose and dry type safety device are free from gas leaks by soapy water etc. before work. * Please do also gas leakage check of each part as well. * Please correctly install a normal cutting crater without deformation or scratches, * Please confirm that the hose and dry type safety device are free from gas leaks by soapy water etc. before work. * Please do also gas leakage check of each part as well. * Please correctly install a normal cutting crater without deformation or scratches
Category Gas Blow-Welding > Blowpipe and Welding Tip > crater
A disconnection LPG crater
KOIKE SANSO KOGYO
38.99 SGD
Gas Pressure (Mpa): (LPG)0.02, (LPG)0.02, (LPG)0.02, Caution: *Please confirm that the hose and dry type safety device are free from gas leaks by soapy water etc. before work. * Please do also gas leakage check of each part as well. *Please correctly install a normal cutting crater without deformation or scratches. , *Please confirm that the hose and dry type safety device are free from gas leaks by soapy water etc. before work. * Please do also gas leakage check of each part as well. *Please correctly install a normal cutting crater without deformation or scratches. * Please set the pressure suitable for cutting conditions. * Ignition: First, open the fuel gas valve a little, ignite it, then open the preheating oxygen and then adjust the flame. * Fire extinguishment: Cut off oxygen, prehe...
Category Gas Blow-Welding > Blowpipe and Welding Tip > crater
A switching Gold Light II
KOIKE SANSO KOGYO
299.90 SGD
ADD TO CART
Overall Length (mm): 477, Weight (g): 760, Caution: This product is manufactured in Japanese standards. Please check the specification before you order., This product is manufactured in Japanese standards. Please check the specification before you order.
Category Gas Blow-Welding > Blowpipe and Welding Tip > Cutting Device, Fusing Device
A switching Gold Light II
KOIKE SANSO KOGYO
299.90 SGD
ADD TO CART
Overall Length (mm): 477, Weight (g): 760, Gas: LPG, Caution: This product is manufactured in Japanese standards. Please check the specification before you order., This product is manufactured in Japanese standards. Please check the specification before you order.
Category Gas Blow-Welding > Blowpipe and Welding Tip > Cutting Device, Fusing Device
Central incisor Gold Light II
KOIKE SANSO KOGYO
5.00(1)
259.90 SGD
ADD TO CART
Overall Length (mm): 395, Weight (g): 610, Caution: This product is manufactured in Japanese standards. Please check the specification before you order., This product is manufactured in Japanese standards. Please check the specification before you order.
Category Gas Blow-Welding > Blowpipe and Welding Tip > Cutting Device, Fusing Device
Crater 3250B
NISSAN TANAKA
29.99 - 32.99 SGD
Nozzle Total Length (mm): 75, Caution: This product is manufactured in Japanese standards. Please check the specification before you order., This product is manufactured in Japanese standards. Please check the specification before you order.
Category Gas Blow-Welding > Blowpipe and Welding Tip > crater
Crater 6720
NISSAN TANAKA
22.99 - 169.90 SGD
Mounting Screw: W12-W20, Nozzle Total Length (mm): 49
Category Gas Blow-Welding > Blowpipe and Welding Tip > crater
Intermediate C2H2 crater
KOIKE SANSO KOGYO
17.99 SGD
Gas Pressure (Mpa): (LPG)0.02, Oxygen Pressure (MPa): 0.3, Caution: * Please confirm that the hose and dry type safety device are free from gas leaks by soapy water etc. before work. * Please do also gas leakage check of each part as well. * Please correctly install a normal cutting crater without deformation or scratches, * Please confirm that the hose and dry type safety device are free from gas leaks by soapy water etc. before work. * Please do also gas leakage check of each part as well. * Please correctly install a normal cutting crater without deformation or scratches
Category Gas Blow-Welding > Blowpipe and Welding Tip > crater
6350 M for LPG melting in heating crater
NISSAN TANAKA
43.99 SGD
Category Gas Blow-Welding > Blowpipe and Welding Tip > crater
Small cutter K
NISSAN TANAKA
229.90 SGD
ADD TO CART
Category Gas Blow-Welding > Blowpipe and Welding Tip > Cutting Device, Fusing Device
Road marking burner
Shinfuji Burner
329.90 SGD
ADD TO CART
TRUSCO Part Number: 495-3801, Flame Temperature (deg C): 1300, Conduit Length (mm): 450, Caution: This product is manufactured in Japanese standards. Please check the specification before you order., This product is manufactured in Japanese standards. Please check the specification before you order.
Category Gas Blow-Welding > Road Marking
Road Marking number S
Shinfuji Burner
11.99 SGD
Category Gas Blow-Welding > Road Marking
Road Marking number L
Shinfuji Burner
4.50(2)
14.99 SGD
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., This product is manufactured in Japanese standards. Please check the specification before you order.
Category Gas Blow-Welding > Road Marking
For load marking sign visitors
Shinfuji Burner
45.99 SGD
ADD TO CART
TRUSCO Part Number: 495-3711, Caution: This product is manufactured in Japanese standards. Please check the specification before you order., This product is manufactured in Japanese standards. Please check the specification before you order.
Category Gas Blow-Welding > Road Marking
Road marking sign sheet
Shinfuji Burner
45.99 - 46.99 SGD
Character Dimension (mm): 300x300, Caution: *Since the blade gets a pain, please use the scissors you use, even if it hurts., *Since the blade gets a pain, please use the scissors you use, even if it hurts.
Category Gas Blow-Welding > Road Marking
Road marking line
Shinfuji Burner
32.99 - 38.99 SGD
Length (m): 5, Caution: This product is manufactured in Japanese standards. Please check the specification before you order., This product is manufactured in Japanese standards. Please check the specification before you order.
Category Gas Blow-Welding > Road Marking
Glitter intensive pyrolysis for heater propane
CHIYODA SEIKI
25.99 - 49.99 SGD
Category Gas Blow-Welding > Blowpipe and Welding Tip > crater
Straight-head cutter
CHIYODA SEIKI
279.90 - 1,999.00 SGD
Category Gas Blow-Welding > Blowpipe and Welding Tip > Cutting Device, Fusing Device
For fireplate propane for diffusion heater
CHIYODA SEIKI
67.99 - 199.90 SGD
Category Gas Blow-Welding > Blowpipe and Welding Tip > crater
For pyro propane for centralized heater
CHIYODA SEIKI
25.99 - 49.99 SGD
Category Gas Blow-Welding > Blowpipe and Welding Tip > crater
Medium pressure cracker for cracking acetylene
CHIYODA SEIKI
27.99 - 87.99 SGD
Category Gas Blow-Welding > Blowpipe and Welding Tip > crater
Spread type cutting dexterity for crater propane
CHIYODA SEIKI
13.99 - 259.90 SGD
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., This product is manufactured in Japanese standards. Please check the specification before you order.
Category Gas Blow-Welding > Blowpipe and Welding Tip > crater

1 2 3 Next

Gas Blow-Welding Related Products

Related Products