Air Conditionings, Electric Facilities, Piping, Plumbing Equipments Products

Color Tone: Silky White

Purpose: Typical air conditioner aluminum flexible cable duct, Typical air conditioner aluminum flexible cable duct, Maximum Temperature (Degree C): 140, Length (m): 3 (during contracting: 820mm), Material: Aluminum

Material (handle): SUS430, Material (stem): SUS316, Material (ball): SUS316

Purpose: Impact resistance is required for water supply, Length (m): 1

Secondary Side Pressure (MPa): Gauge / 0 - 1 (0 - 10kgf/cm 2 ), Valve-Inlet Pressure (MPa): Gauge / 0 - 16 (0 - 160kgf/cm 2 ), Pressure Adjustment Range (MPa [kgf/cm2]): High / 0.5 (5), Type: Chissoburo for

Display Switching: (Available unit) micron (micron), Torr (Torr), mTorr (mTorr), mmHg (Mirieichiji), mBar (mbar), Pa (Pascal), Cable Length (cm): Up to 150 (winding code), Unit Dimensions (Height x Width x Depth)(mm): 165x85x38, Reaction Velocity (sec): (Sampling) 4 times, Battery life (hours): 15, Functions: Auto-off (10min), set vacuum Reached indicator lamp, Sensor: Thermocouple type pressure sensor, Pricision: (Air to 1000 microns) indicated value +/- 5% / (1000 - 100 microns) indicated value +/- 3% / 1.5% (100 - 1 micron) indicated value, Power (V): 9 (006P) battery, Operating Temperature Range (deg C): 0 to 40, Measuring Range: 20.000 to 1 micron, Connection Diameter: 1/4 Fureamesu, Accessories: Special case, battery 006Px1

Class: 10K, Opreration Method: Manual, Material (body): C3771BE, Material (handle): ZDC, Material (O-Rings): NBR, Dimensions D (mm): 43, Dimension H (mm): 51

Material (strainer): Stainless steel (net), synthetic resin (frame), Mesh (Strainer): 60 meshes, Primary Pressure (MPa): 100 - 750, Materials (valve body): Bronze, Compatible Fluid: Hot and cold water, Set Pressure Range (kPa): (Standard) 80+/-6, Mounting Direction: Combined horizontal and vertical, Nominal Diameter (A): 20, Connection: JIS Rc3/4, Maximum Temperature (degreeC): 60, Nominal Diameter (B): 3/4, Form: Pressure reducing valve for water supply, Weight (ｋg): 0.906, Material: ( Diaphragm-valve body and a check valve) Heat-resistant water resistant synthetic rubber, TRUSCO Part Number: 382-3041, Specification: (Open flow) 30L/min minimum (Closing pressure of reverse prevention mechanism) 3kPa maximum (Working pressure of negative pressure actuating mechanism) opening operation /-5...

Type: One (soft)

Caution: Please attach the strainer on primary side of the solenoid valve, Fluid Viscosity (cSt): 20 or less, Material (diaphragm): NBR, Pressure Resistance (MPa [kgf/cm2]): Water pressure: 2 [20], Material (Body): CAC406 (bronze casting), Specification: Momotaro Diaphragm with water hammer relaxation

Purpose: For heat exchangers, for the chemical industry, for water and hot water supply, for gas pipes gasket, for bath tub., Melting Point (degree c): 1083, Specific Gravity: 8.94, Length (m): 2.5

Purpose: For lightweight materials, Type: One side hole (type with nail holes), Material: Stainless steel

Melting Point (degree c): Al660, Length (m): 2 (Compression: 1)

Liquid: Such as light oil A heavy oil and machine oil, Material: Feather: PPS (polyphenylene sulfide), Type: Manual drum pump, Accessories: Discharge hose

Caution: Please attach the strainer on primary side of the solenoid valve, Fluid Viscosity (cSt): 20 or less, Compatible Pressure (MPa): 0 - 1.0, Operation: Electric current opening, Material (disk): Teflon, Materials (Valve): SUS (stainless steel), End Connection: JIS Rc screw thread, Before/After Minimum Differential Pressure of Valve:(MPa): 0 {0kgf} (when a coil is horizontal, it is 0.03 {0.3Kgf}), Ambient Temperature (Degree C): 5 - 60, Compatible Fluid: Steam, water, air and oil (kerosene, diesel oil, gasoline), Mounting Position: Aspect piping can be used in mounting position from the coil on the vertical to horizontal., Pressure Resistance (MPa [kgf/cm2]): Water pressure: 2 [20], Fluid Temperature (Degree C): 5-180 (For hot water less than 100), Insulation Assortment: H kind (silic...

Plunger Diameter (mm): 22, Water Absorption Capacity (cc/1 Time): 13, Stroke (mm): 35

Purpose: Petroleum refining, chemistry, ships and vessels, a variety of industries' plumbing flange., Tensile Strength (Mpa[kgf/cm2]): Horizontal direction 17.0 [170], Density (g/cm3): 1.81, Color: Blue, Thickness (mm): 1.5

Protection Level: IP67, Caution: Use cable / vinyl code for electric wire., Application: Around machine tool, fixed piping of automation machine

Cord Length (m): 0.7, Rated Voltage (V): 100, Specification: Drawstring switch with power cord plug

Purpose: General air-conditioning ducts, Temperature Range (deg C): (Ventilation temperature limits) -30-200 (representative value and not guaranteed values), Material: Aluminum

Material (bonnet): C3771BE, Material (body): C3771BE, Material (stem): K metal, Material (disk): C3771BE

Material: Brass

Caution: Cables not attached

Rated Voltage (V): AC100, Cycle(Hz): 50/60

Caution: Please do not adjust (change) the set pressure. In the remote chance that adjustment is needed, please have it done by a skilled professional (maintenence worker, etc)., Materials (Valve): SCS13 (stainless steel cast steel), Cap Model: Without lever, Fluid Temperature (Degree C): 225 or less, Set Pressure (MPa): 0.3, Specification: CAC-SCS made, general purpose

Nominal Pressure: 5K, Screw Type: PT screw

Melting Point (degree c): 1083, Specific Gravity: 8.94, Length (m): 10