The reviews are automatic translation.
Replace with furnace electromagnetic relay
On 2020-01-30 23:07:32
The heater control with the temperature controller and the electromagnetic relay made the solid state relay silent because the click and loud sound were harsh. Many times higher than made in China, but a trusted brand.
Temperature control of mold and jig
On 2018-09-18 13:55:45
Used for temperature control of heater
In AC control by DC control input, there is a record inside the company, but this time we adopted AC type for control input.
Since it is AC control, it is good that it can cope with contactless connection of the relay control circuit.
The load is about 1/3 of the specification, but the load will increase in the future.
I installed it sideways to forcibly cool the genuine heat sink, depending on the direction of the cooling wind
It is good to choose the orientation of the heat sink.
Heat sealer on-off temperature control
On 2018-09-07 19:08:12
Controlling a large current with an on-off adjustment system causes power supply fluctuation and spark noise, which adversely affects the surroundings.
SSR has ZERO cross function. Using this makes it possible to use high-speed on-off adjustment (0.1 - 0.5 s) without fuss. The cost is higher than other related parts.
Used for manufacturing temperature controller
On 2018-05-09 21:02:44
It helps to simplify complicated circuits. There is enough capacity and I am very satisfied.
Used for manufacturing equipment
On 2018-05-06 17:52:36
It is Omron's goods highest. I thought that the abolition number is a bit large
Heater temperature control
On 2018-04-16 16:16:15
Because there are few products for DC load, I use repeat. I would like you to commercialize even larger current capacity.
On 2018-04-13 17:54:08
Convenient because the primary side is the AC line voltage. A large capacity load can be controlled with a switch with a small contact capacity.
Repair of water heater
On 2015-08-31 18:22:11
It worked without problem.
Compressor power control
On 2015-03-13 17:15:12
The use of this product is to protect compressor etc from overload at power on by using zero cross function. As a result, it has been stable for a long time in combination with the company's digital thermo relay.
Turn ON for less than 1 second every few minutes with a reasonable load
On 2014-07-14 13:24:20
The expected lifetime of the mechanical relay is about 100,000 times, it is likely to reach in about a year. Since I do not conduct continuous energizing, I tried to SSR. I expect to be able to use it for about 10 years.
For device power ON / OFF by remote control
On 2013-08-10 09:08:26
In order to control safely, we use the same brand that we have proven.
For repairing electrical appliances
On 2013-02-11 12:18:20
I think that it is a good product with wide voltage range and easy handling.
On / off control of the light output load and the projector etc which output is comparatively large with the digital output board etc for personal computer.
On 2011-05-03 02:39:27
I am saved to the extent that it does not become a business if there is not this. The best! I have no complaints at all! The operation with the network camera "Canon VB - C50iR + VB - EX50" is also perfect! It is truly grateful that you can program-control the on / off of a large projector's output on-site through the Internet! Correct answers made separately from the heat sink! I'm also happy to choose a heat sink for convenience! I knew that the performance of this product and the product itself is good from the long time, but when it comes to "construction", the SSR has the drawback that it is hard to install because it is "we are doing hard" in most cases However, this product is "easy to work" due to its simple appearance as you can see! Rather, versatility is higher than Hata's EMR! (# Well, the price is not cheap like a hefty EMR ....)
I wanted to change the 200V floor warming relay to a solid state relay.
On 2010-11-05 16:50:56
A huge heat sink was necessary, it was saved because it treats it with Monotaro, but if possible link it to the heat sink from the explanation of the product would have been easy to find.