The reviews are automatic translation.
On 2019-10-15 10:59:48
I feel a little difficult to fly a spark, but I am satisfied because it is cheap.
As a consumable
On 2019-10-05 22:11:39
Because the Taro brand is cheap. Not only when welding a little, but also when it is used in large quantities, it is saved that it is inexpensive.
Parts production by welding of SSt 4.5 to 12mm thickness
On 2019-10-02 19:11:46
This time I tried using 3.2. I was surprised to use it other than We used Z44 all the time, but repeat from now on as price is low.
DIY at 100V
On 2019-10-02 15:38:19
Used with IMAX 120 and 100V.
It feels like arcing is better than Suzukid welding rods.
Thank you for being cheap for the amount.
2-4mm channel, angle welding
On 2019-10-02 14:04:41
The price is the same as other lime titanias. The bad thing is the box is weak
Used for steel frame welding
On 2019-09-30 19:17:58
The price is reasonable, but it can be used normally without any bad products. Repeated many times and useful.
Work with steel from home improvement
On 2019-08-31 06:58:21
It is cheap but can be used normally.
We always repeat with monotaro brands such as red rust rust prevention and zinc paint!
On 2019-08-29 20:00:29
Arc comes soon If you use a strange welding rod occasionally, it is fixed by hand according to the laser, but it will be exhausted while hitting the concon
Architectural sash installation
On 2019-08-09 06:41:01
Most of them are scored due to the nature of the work, and arc start is required, but I think the start is better than Z-44. However, the decrease is a little faster. It is more than offset by price difference.
DIY applications for household welding
On 2019-07-24 19:23:36
Used when making tables and bench legs with round or flat steel
When used with 100/200 V combination machine of Mr. Haiger industry
It was possible to raise the current up to 81A at the maximum for 100V environment, but it was easy to use and the finish was also beautiful. Cospa is also the best!
I will try to buy it together with the 2MM one this time.