Pneumatic Riveters
A riveter is a tool that drives tacks called rivets. A rivet is a rivet that joins thin plate-like objects that are stacked on top of each other. By using a joining tool called a riveter, it is possible to join objects that cannot be screwed together in a single process. . A riveter that uses pneumatic pressure is called an air riveter, and compared to manual riveters, it is superior in that it can crimp a large number of rivets in a short time and with great force.
Other Related Pages
- MonotaRO Air RiveterSince it is air, it is possible to crimp rivets strongly and quickly crimp a large number of rivets. For rivet caulking * Do not use for any other purpose. * The hole diameter of the nosepiece nominal 6.4 size is approximately Φ4.1mm. Even if the rivet is nominally 6.4, only rivets with a mandrel... Read MoreStroke (mm) 14 Suitable Air Pressure (MPa) 0.62 Suitable Rivet Diameters (Φmm) 2.4、3.2、4.0、4.8、5.6、6.4 Air Hose Connection PT1/4 Suitable Material For iron, aluminum and stainless steel Height (mm) 300
- LOBSTER (LOBTEX) Auto rivet feederAn ultra-compact rivet feeder that can easily and automatically supply rivets. The rivet supply unit can be adjusted to 3 positions. Since it is a desktop size, it can be easily moved according to changes in the work site, greatly increasing the degree of freedom in the installation location. Bli... Read MoreMain Unit Dimensions, Width W x Depth D x Height H (mm) 185×355~435×305 Necessary Air Pressure (MPa [kgf/cm2]) 0.5~0.6 Power Input (V) AC100~240(50~60Hz) Mass (kg) 10.9 Suitable Rivet Diameters (Φmm) 3.2from ₱370,009.64Min. 3 days
- MonotaRO Air riveter setSince it is an air type, many rivets can be easily crimped. * Please avoid using it for any other purpose. * Do not use for anything other than its intended purpose. * The color may change from time to time depending on the lot situation.Suitable Air Pressure (MPa) 0.62 Air Consumption (L/rivet) 1.1 Mass of Main Unit (kg) 1.46 Suitable Rivet Diameters (Φmm) 2.4/3.2/4.0/4.8 Suitable Material For iron, aluminum and stainless steel Air Hose Connection PT1/4
- LOBSTER (LOBTEX) Air riveterAchieves the lightest weight in its class, 1090g, which can be easily operated even for long hours of work and weak women. Equipped with a stress-free 19mm long stroke in the middle class. Double-strike Less dramatically improves work efficiency * Be sure to attach the tank unit before use. Also,... Read MoreAir Consumption (L/min) 68 (at 0.49MPa air pressure) Mass (g) 1090 Suitable Rivet Diameter (Φmm) 2.4、3.2、4.0、4.8 Trusco Part No. 406-7452 Working air pressure (MPa [kgf / cm 2 ]) 0.49~0.59[5~6] Stroke (mm) 19
- LOBSTER (LOBTEX) Air Riveter (Standard Type)The AR-011 series recognized in the world. Crystal of evolution over half a century !! The ruggedness that fits the name of AR-011 remains the same. Stroke up from 14mm to 16mm (MX). Stainless steel rivet compatible: Realized by ultra-hard jaw and SoftSet (shockless) mechanism. Improved maintaina... Read MoreWorking Air Pressure (MPa) 0.5~0.6from ₱45,187.31Min. 2 days
- MonotaRO Air riveter stroke 19mmSince it is air, it is possible to crimp rivets strongly and quickly crimp a large number of rivets. Since the stroke is 19 mm, it is not necessary to hit twice and work efficiency is improved. For rivet caulking * Do not use for any other purpose. * The hole diameter of the nosepiece nominal 6.4... Read MoreSuitable Rivet Diameters (Φmm) 2.4、3.2、4.0、4.8、5.6、6.4 Suitable Air Pressure (MPa) 0.62 Air Consumption (L/min) 113 Overall Length (mm) 260 Suitable Hose Diameter (Φmm) 9.5 Mass (kg) 2.07 Air Hose Connection PT1/4 Height (mm) 324 Stroke (mm) 19
- MonotaRO Air riveter hydraulicSince it is a hydraulic air riveter, there is little recoil during work, so it is suitable for continuous work. For rivet caulking * Do not use for any other purpose.Air Hose Connection PT1/4 Suitable Hose Diameter (Φmm) 9.5 Suitable Air Pressure (MPa) 0.62 Air Consumption (L/min) 113
- LOBSTER (LOBTEX) Air NutterLOBSTER's next-generation air nutter. High power model compatible with M12 shrimp nut! Although it is lighter than the manufacturer's conventional product, the caulking speed and power are improved! Caulking speed increased by about 40% (compared to the manufacturer's conventional mod... Read MoreWorking Air Pressure (MPa) 0.5~0.6 Trusco Part No. 778-2322 Specification (Tool tensile force) 25kN Range of Use (M3),M4,M5,M6,M8,M10,(M12) Mass (kg) 2.1
- LOBSTER (LOBTEX) Shrimp Riveter M Nosepiece 2.4Tip parts for LOBTEX S type, M type air riveter, hand riveter * Install a size that matches the diameter of the rivet flange you are using. * If rivets of different sizes are used, rivets cannot be performed normally.Mass (g) 5 Trusco Part No. 786-4892 Suitable Rivet Diameter (Φmm) 2.4from ₱451.87Min. 2 days
- JTC Air riveterStainless steel rivets can be usedMass (kg) 1.85 Width (mm) 165 (without cap) Suitable Rivet Diameters (Φmm) 2.4、3.2、4.0、4.8、6.0、6.4 Height (mm) 240 RoHS directive (corresponding to 10 substances) Correspondence Specification Pulling force with chuck: 1600kg/f
- NIPPON POP RIVETS AND FASTENERS Pneumatic hydraulic rivet tool ProSet XTAchieves higher durability! Adopts a highly durable seal that prevents oil leakage The grip has an ergonomic design and non-slip equipment to improve operability! Equipped with a large-capacity mandrel collector, safety measures that automatically stop air when removed Easy disassembly and assemblySuitable Air Pressure (MPa) 0.5-0.6 Specification Air hydraulic
- JTC Air riveterStainless steel rivets can be usedMass (kg) 1.56 Performance 2.4・3.2・4.0・4.8 RoHS directive (corresponding to 10 substances) Correspondencefrom ₱15,620.25Min. 2 days
- LOBSTER (LOBTEX) Air riveter AR2000 seriesWe boldly adopted resin for the main body to reduce the weight. Uses a small diameter frame head that is convenient for work in tight spaces. A soft grip that is nice for continuous work and long hours of work, and a Soft-Set (shockless mechanism) type that softens the impact during light switch ... Read MoreNecessary Air Pressure (MPa [kgf/cm2]) 0.49~0.59(5~6)from ₱40,290.30Min. 3 days
- LOBSTER (LOBTEX) Air riveterIf you want to use the most popular Φ2.4 to Φ4.8 wide range of blind rivets, AR2000M is recommended. Due to the longer stroke (14 → 16mm), the range that can be crimped with a single switch operation has expanded dramatically. Moreover, the speed is improved compared to the conventional product [... Read MoreMass (kg) 1.2 Materials Suitable for Rivet Size (Φ3.2mm Dia.) ○ Materials Suitable for Rivet Size (Φ2.4mm Dia.) ○ Necessary Air Pressure (MPa [kgf/cm2]) 0.49~0.59(5~6) Materials Suitable for Rivet Size (Φ6.4mm Dia.) × Air Consumption (L/rivet) 1.7 Materials Suitable for Rivet Size (Φ4.0mm Dia.) ○ Materials Suitable for Rivet Size (Φ4.8mm Dia.) △ (Not for NSS and NST) Overall Length (mm) 270 Trusco Part No. 161-1399 Height H x Length L x Width W (mm) 283×270×21 Suitable Jaw Super hard Stroke of Mandrel (mm) 16from ₱53,410.66Min. 3 days
- JTC Long nose air riveterIdeal for riveting deep refueling palate !!Nozzle Length (mm) 180 Mass of Main Unit (kg) 2.1 Cutting Capacity (mm) 2.4・3.2・4.0・4.8・6.0・6.4 RoHS directive (corresponding to 10 substances) Correspondencefrom ₱49,298.98Min. 6 days
- LOBSTER (LOBTEX) Air riveterThe rivets are sucked and held on the nose piece by air pressure, and the cut shafts are forcibly collected by using a tank unit or the like.Necessary Air Pressure (MPa [kgf/cm2]) 0.49~0.59(5~6) Type With suction discharge device Materials Suitable for Rivet Size (Φ6.4mm Dia.) × Materials Suitable for Rivet Size (Φ2.4mm Dia.) ○from ₱65,745.69Min. 3 days
- LOBSTER (LOBTEX) Air riveter angle typeWorking Air Pressure (MPa) 0.49~0.59 Mass (g) 1550 Specification 8.0kN tool pulling force Suitable Jaw Sfrom ₱73,969.04Min. 92 days
- LOBSTER (LOBTEX) Riveter Nosepiece LargeTip parts for LOBTEX Air Riveter (Hand Riveter) (Compatible models only) * Install a size that matches the diameter of the rivet flange you are using. If rivets of different sizes are used, rivets cannot be performed normally. * Available only for compatible models.Suitable Model AR011H、AR021Hfrom ₱1,027.51Min. 6 days
- ATI Flash rivet setUsed to crimp rivets. For the aircraft industrySuitable for For flash rivets Dimension (inch) Body: 1/2 Material Tool steelfrom ₱821.92Min. 32 days
- JTC Safety cap for GP101 (101022)RoHS directive (corresponding to 10 substances) Correspondencefrom ₱1,233.09Min. 6 days
- LOBSTER (LOBTEX) Air riveter (with suction / discharge device, lightweight type)Lightweight type that uses resin for the main body. The rivet is sucked and held on the nose piece by air pressure, and the cut shaft is forcibly collected by using a tank unit etc. (type with suction and discharge device).Necessary Air Pressure 0.49~0.59MPafrom ₱57,522.34Min. 32 days
- LOBSTER (LOBTEX) ARV015MX with riveter suction / discharge deviceThe balancer for hanging and the air supply port are in the same direction to improve maneuverability. Eliminates bending of the chute hose and reduces clogging of the mandrel. More rivets can be cut at once! Uses highly durable ultra-hard jaws and Soft-Set. Adoption of one-touch jaw case. With m... Read MoreWorking Air Pressure (MPa) 0.5~0.6 Mass (kg) 1.8 dimensions 2 (mm) 101 Range to Use (Φmm) 2.4、3.2、4、4.8 dimensions 4 (mm) 23 dimensions 1 (mm) 401 dimensions 5 (mm) 41 dimensions 3 (mm) 64.5 dimensions 6 (mm) 79 tool tensile strength (kN) 8 Suitable Jaw Super hard jaw mediumfrom ₱65,745.69Min. 3 days
- ATI Flash set straightUsed to crimp rivets. For the aircraft industrySuitable for For flash rivets Material Tool steel
- LOBSTER (LOBTEX) Air riveter angle typeWorking Air Pressure (MPa) 0.49~0.59 Mass (g) 1670 Specification 8.0kN tool pulling force Suitable Jaw Sfrom ₱69,857.36Min. 92 days
- ATI Cup rivet set offset 5/8Used to crimp rivets. For the aircraft industrySuitable for For 1/4 inch AN470 rivet Dimension (inch) Body: 5/8 Material Tool steelfrom ₱1,932.08Min. 3 days
- ATI Cup rivet set offset 1/2Used to crimp rivets. For the aircraft industryMaterial Tool steel Dimension (inch) Body: 1/2from ₱1,027.51Min. 32 days
- ATI Flash rivet set offsetUsed to crimp rivets. For the aircraft industryMaterial Tool steel Specification Offset drive, 401 shank Suitable for For flash rivets Trusco Part No. 792-7584 Mass (g) 86 Length (inch) 3-1/2from ₱2,302.13Min. 32 days
- ATI Flash rivet set 1/2 body offsetUsed to crimp rivets. For the aircraft industryTrusco Part No. 792-7592 Length (inch) 5-1/2 Suitable for For flash rivets Material Tool steel Specification Offset drive, 401 shank Mass (g) 68from ₱1,068.62Min. 32 days
- Cherry Pneumatic rivet power toolAn pneumatic hydraulic tool suitable for a wide range of rivets. * Pulling head is sold separately.Air Pressure (MPa) 0.62~0.76 Mass (kg) 1.9 Overall Length (mm) 279 Material Steelfrom ₱230,212.69Min. 32 days
- LOBSTER (LOBTEX) Auto rivet feeder 40B + air hose setSince it is a desktop size, it can be easily moved according to changes in the work site, greatly increasing the degree of freedom of installation location.Main Unit Dimensions, Width W x Depth D x Height H (mm) 185×355~435×305 Trusco Part No. 856-9016 Necessary Air Pressure (MPa [kgf/cm2]) 0.5~0.6 Power Input (V) AC100~240(50~60Hz)from ₱287,776.14Min. 32 days
- Cherry PULLING HEAD Right angle typeIt is a right angle type PULLING head that uses G84 and is attached to the head when hitting a blind bolt. The straight type enables studs where the clearance is not sufficient.Total Length (inch) 6-7/16 Mass (g) 90from ₱320,669.54Min. 3 days
- ATI Rivet Gun Kit 3XSpecification NSN#5180-01-462-7729 Mass (kg) 6 Trusco Part No. 490-3501from ₱73,969.04Min. 32 days
- Cherry Pneumatic rivet high power toolIt is used for -8 size rivets and blind bolts that lack power in G704B. * Pulling head is sold separately.Air Pressure (MPa) 0.62~0.76 Mass (kg) 3.5 Overall Length (mm) 336 Trusco Part No. 490-8538 Material Steelfrom ₱370,009.64Min. 32 days
- ATI Cup rivet set double offsetUsed to crimp rivets. For the aircraft industryLength (inch) 5-3/4 Material Tool steelfrom ₱2,425.48Min. 32 days
- Cherry Hand type rivet toolOverall Length (mm) 235 Mass (g) 370 Suitable Jaw 728B4from ₱22,198.93Min. 3 days
- ATI Cup rivet set gooseneckUsed to crimp rivets. For the aircraft industryMass (g) 365 Trusco Part No. 792-7606 Material Tool steel Suitable for For 5/32 inch AN470 rivet Length (inch) 6-5/8from ₱6,574.57Min. 3 days
- ATI Rivet Gun Kit 4XSpecification NSN#5180-01-462-7729 Trusco Part No. 490-3510 Mass (kg) 6.1from ₱82,192.39Min. 32 days