Especially suitable for agricultural machinery. Compared to general industrial belts, this belt is a thin belt designed to withstand harsh usage conditions such as large impact, smaller pulley diameter, bending in the opposite direction, and use at high temperatures. It also has excellent heat re... Read More
Operating Limit Temperature (℃) -30~+90 Belt Width (mm) 16.5 Electrical Resistance (Ω) 6M or less Belt Height (mm) 9.5
V-belt Red SII is a standard V-belt A-type, B-type, and C-type, which is a V-type belt that is suitable for reverse bending use (reverse bend) by reducing the thickness of the belt. It is especially suitable for agricultural machinery such as combine harvesters where the pulley hits from the back... Read More
Operating Limit Temperature (℃) -30~90 Belt Top Width (mm) 16.7 Electrical Resistance (Ω) 6M or less Belt Height (mm) 9.0 Type SB type
Especially suitable for agricultural machinery. Compared to general industrial belts, this belt is a thin belt designed to withstand harsh usage conditions such as large impact, smaller pulley diameter, bending in the opposite direction, and use at high temperatures. It also has excellent heat re... Read More
Operating Limit Temperature (℃) -30~+90 Belt Width (mm) 12.5 Electrical Resistance (Ω) 6M or less Belt Height (mm) 8.0
V-belt Red SII is a standard V-belt A-type, B-type, and C-type, which is a V-type belt that is suitable for reverse bending use (reverse bend) by reducing the thickness of the belt. It is especially suitable for agricultural machinery such as combine harvesters where the pulley hits from the back... Read More
Operating Limit Temperature (℃) -30~90 Belt Top Width (mm) 12.7 Electrical Resistance (Ω) 6M or less Belt Height (mm) 7.0 Type SA type
V-belt W800 is a high-performance V-belt for agricultural machinery that has excellent heat resistance, bending resistance, and impact resistance, and is capable of high-load transmission.
Belt Top Width (mm) 16.7 Belt Height (mm) 9 RoHS directive (corresponding to 10 substances) Correspondence Type SB type
Uses a special woven canvas to improve flexibility Long life (about 1.5 times that of the conventional product (HP II))
Large agricultural machinery such as tractors, combines, rice transplanters, etc.
RoHS directive (corresponding to 10 substances) Correspondence
V-belt W800 is a high-performance V-belt for agricultural machinery that has excellent heat resistance, bending resistance, and impact resistance, and is capable of high-load transmission.
Belt Top Width (mm) 12.7 Belt Height (mm) 7 Type SA type
V-belt Red SII is a standard V-belt C-type belt with a thinner belt that is suitable for reverse bending (reverse bend). It is especially suitable for agricultural machinery such as combine harvesters where the pulley hits from the back.
For agricultural machinery
Operating Limit Temperature (℃) -30~90 Belt Height (mm) 11.0 Belt Top Width (mm) 22.2 Electrical Resistance (Ω) 6M or less Type SC type
Especially suitable for agricultural machinery. Compared to general industrial belts, this belt is a thin belt designed to withstand harsh usage conditions such as large impact, smaller pulley diameter, bending in the opposite direction, and use at high temperatures. It also has excellent heat re... Read More
Operating Limit Temperature (℃) -30~+90 Belt Height (mm) 11 Belt Width (mm) 22 Electrical Resistance (Ω) 6M or less
You can easily join with fittings and make a belt of the required length according to the machine. The belt can be attached and detached without disassembling the machine.
Mainly used as an elevator belt in the agricultural market
RoHS directive (corresponding to 10 substances) Correspondence
V-belt W800 is a high-performance V-belt for agricultural machinery that has excellent heat resistance, bending resistance, and impact resistance, and is capable of high-load transmission.
Belt Height (mm) 11 Belt Top Width (mm) 22.7 RoHS directive (corresponding to 10 substances) Correspondence Type V-belt
Since it has been inspected in Japan, it is of reliable quality. Fits most tractors.
* There is no compatibility information. Please check the size and judge the suitability. * Unlike genuine products, this product is highly versatile, so even if it is a good product, it may not be compatible wit... Read More
Mounting Bolts 11mm Width (mm) 49 Height (mm) 140 Length (mm) 224 Thickness (mm) 9.5 Mass (g) About 550 Mounting Dimensions (mm) Width 24 Tip width (mm) 58 Material Special steel
The forward and reverse are switching claw type. Ideal as a tool for replacing the claws of tillers and tractors. Since it is thin and has no socket, it can be used in narrow spaces. Nickel chrome plated finish.
Trusco Part No. 355-0427 Overall Length (mm) 485 Mass (g) 650 Hex Size, Across Flats (mm) 17×19 Thickness (mm) 19
This product uses a material that is less likely to wear than conventional products (compared to manufacturers).
* There is no compatibility information. Please check the size and judge the suitability. * Unlike genuine products, this product is highly versatile, so even if it is a good product, ... Read More
Lever principle Tightening / loosening Just change the hanging method depending on the work content. It assists the work with the nail replacement wrench more safely and efficiently.
Overall Length (mm) 480 Material Chrome vanadium steel Mass (g) 630 Cell Spacing (mm) 40 Trusco Part No. 848-9199
It has excellent heat resistance and crack resistance, and is suitable for reverse bending and use in areas with a small pulley diameter. Since it has a low edge specification with no canvas on the side, it has a large grip and can transmit high horsepower.
A general-purpose type low-edge cog bel... Read More
Belt Width (mm) 16.5 Effective Pitch Length (inch) 29 Belt Height (mm) 9.0