Submersible Pumps
Submersible pumps are mainly used for drainage and water exchange purposes. Therefore, it has excellent water resistance, and is strong and durable against rust. It can be used for a wide variety of purposes such as drainage of spring water, injection and replacement of fish tanks, sewage and rainwater from factories and buildings, drainage from civil engineering works, horticulture and agricultural land. Many are designed to be small enough to be used easily, and even if clogged at the bottom, water can be absorbed from the side, and those using impellers that are resistant to filth and sewage, rock with sand and mud There are various things such as strong ones, so you need to choose according to the place you use.
Other Related Pages
TERADA PUMP MFG. Submersible Pump for Sewage & Wastwater (Light Weight Resin Submersible Pump) SUPER TECPONLightweight, compact and resistant to clogging, all wetted parts are made of resin and stainless steel. It is rust resistant and has excellent durability. The discharge direction can be easily set either vertically or horizontally. The strainer is also easy to remove, making cleaning and cleaning... Read MoreLiquid Temperature Range (℃) 0 to 40 (no freezing) Poles of Motor 2 Remaining Water Level (mm) 45 Length of Foreign Object to Pass (mm) 50 (longest) Diameter of Foreign Object to Pass (Φmm) 8 Minimum Operation Water Level (mm) 85 Electric Motor Dry type underwater motor Connector Flange connection Type Non-automatic (PG type) Material (Spindle) SUS304 Structure (Impeller) Semi-vortex Material (Impeller) Synthetic resin Material (Casing) Synthetic resin- TSURUMI MANUFACTURING Submersible pump for general construction drainage + HS typeThis is a popular type of spiral casing that can be used even in harsh environments, taking into consideration the cross section through which foreign matter passes. Light materials such as aluminum die-casting and water-resistant special urethane rubber are used everywhere to create a light and ... Read MoreOutput (kW) 0.4 Discharge Rate (L/min) 100 Discharge Diameter (Φmm) 50 Diameter of Foreign Object to Pass (Φmm) 7 Lifting Height (m) 8
- TSURUMI MANUFACTURING Submersible High Spin Pump for Greywater (Banks Series) PN TypeRealizes a light and strong resin pump. Equipped with a high-spin impeller with a high-gap structure that has excellent passage characteristics and pump performance, it is suitable for the transfer and drainage of sewage containing impurities. For drainage of septic tanks and small-scale treatmen... Read More
- KOSHIN Submersible Pump for Fresh Water High Pressure Type Diameter 25 mm SM-H SeriesHigh pressure type that is perfect for watering around the house Reuse the remaining hot water in the bath High pressure type that is comparable to water services With a convenient one-touch coupling Please check the frequency 50 or 60Hz. With a powerful 150W motor, it is ideal for pushing up to ... Read MoreOutput (kW) 0.15 Voltage (V) 100 Minimum Operation Water Level (mm) 100 Maximum Lifting (m) 15 Lifting Height (m) 15 Dimensions (Width W x Height H) (mm) 164×278 Remaining Water Level (mm) 24 Discharge Diameter (Φmm) 25 Power Cable (m) 4 Mass (kg) 4.8 Discharge Rate (L/min) 50 Maximum Pumping Rate (L/min) 50 Continuous Operating Time 8 Type For fresh water (high pressure type) Specification For fresh water (high pressure)
- KOSHIN Submersible Pump Diameter 20mm KS / SMB SeriesReuse the remaining hot water in the bath for watering around the house For fresh water Both 50 / 60Hz can be used For the transfer of fresh water * Please check the model size carefully before purchasing. * Cannot be used for fresh water or sewage.Voltage (V) 100
- TSURUMI MANUFACTURING Construction Drainage Submersible High Spin Pump LB TypeLB type boasting a proven track record and reliability. Adopting a high-spin type impeller with a high-gap structure, it is resistant to wear and has impeller characteristics that reduce performance deterioration even when worn. It is a design with less <lock> due to sand etc. Discharge dir... Read MoreOperating Temperature Range (℃) 0～40 Diameter of Foreign Object to Pass (Φmm) 6 Type Non-automatic type
- ShinMaywa Industries Float switch for liquid level control Level regulatorA liquid level control switch that can be used for fresh water, sewage, or liquids containing some floating filth. Since part of the part that comes into contact with the liquid is stainless steel and most of it is polypropylene, it is less affected by rust and corrosion and can be used for a lon... Read MoreOperating Temperature (℃) 0～60 Working Current (A) 5 or less Voltage (V) AC, DC 30 or less Number of Cores x Sectional Area (mm2) Cable: Flat type 3 x 0.75 Material Chain: SUS304 Material (Case) PP (polypropylene) resin Material (Cable) PVC Specific Gravity Working liquid: 0.95 to 1.15
- TSURUMI MANUFACTURING Submersible High Spin Pump for Filthy Water (Banks Series) PU TypeIt uses a high-spin (vortex) type impeller and has a large foreign matter passage diameter, so it can handle liquids containing various foreign matter. The stand adopts a shape that is hard to get entangled with long objects. For transfer of raw water in septic tanks, wastewater from filth tanks,... Read More
- TERADA PUMP MFG. Submersible pump for sewage (light weight resin submersible pump)Lightweight, compact and resistant to clogging, all wetted parts are made of resin and stainless steel. It is rust resistant and has excellent durability. The discharge direction can be easily set either vertically or horizontally. The strainer is also easy to remove, making cleaning and cleaning... Read MoreLiquid Temperature Range (℃) 0 to 40 (no freezing) Remaining Water Level (mm) 120 Poles of Motor 2 Length of Foreign Object to Pass (mm) 50 (longest) Diameter of Foreign Object to Pass (Φmm) 8 (maximum) Electric Motor Dry type underwater motor Connector Flange connection Material (Spindle) SUS304 Structure (Impeller) Semi-vortex Material (Casing) Synthetic resin Material (Impeller) Synthetic resin
- TSURUMI MANUFACTURING Submersible high spin pump for low water level drainage + LSC typeLightweight and compact. A unique seal valve seat and a swing valve with a new mechanism prevent backflow of water that has been sucked in. The unique bottom plate structure can drain water down to a minimum water level of 1 mm. The bottom plate with synthetic rubber can also be used for FRP tank... Read MoreOutput (kW) 0.48 Operating Temperature Range (℃) 0～40 Suitable Cable Outer Dia. (Φmm) 10.1 Discharge Rate (L/min) 100 Mass (kg) 12.0 Number of Poles 2 Discharge Diameter (Φmm) 25 Cable Length (m) 5 Material (Frame) ADC12 Starting Method Capacitor operation Motor Dry type submersible induction motor Structure (Impeller) High spin Connector Hose coupling Built-in Protection Device Miniature protector Insulation Class Motor: Class E Lubrication Motor: Turbine oil VG32 Type Non-automatic type Material (Suction Cover) SPC + urethane rubber Material (Spindle) SUS403 Structure (Bearing) Sealed ball bearing Material (Shaft Seal) SiC (mechanical seal) Voltage (V) Single phase 100 Material (Casing) Synthetic rubber Material (Impeller) Urethane rubber Material (Cable) VCT(3×1.25)
- NAKATOMI Submersible pump for sewageCompact submersible pump for sewage. Power plug with ground wire (round terminal). For sewage and wastewater treatment of civil engineering and construction sites. For water supply and drainage for agriculture. For emergency wastewater treatment.Water Temperature (℃) -40 Dimensions, Width W x Depth D x Height H (mm) 160×145×325 Output at 50/60Hz (W) 190 / 240W (power consumption) Power Consumption (W) 190/240 Current (A) 2.6/2.4 Mass (kg) 3.9 Discharge Diameter (Φmm) 32 Minimum Operation Water Level (mm) 50 Continuous Operating Time (hours) 8 Power Cable CT 0.75mm x about 3.5m Suitable Fluid For sewage Power Input (V) Single-phase 100 (50 / 60Hz) Protective Device [Motor] Thermal protector
- TERADA PUMP MFG. Stainless steel submersible pump CSL type for bottom waterComplete rust prevention on wetted parts. Greatly improved durability. Simple structure for easy maintenance and inspection. Easy-to-use compact and lightweight type. Furthermore, as a measure against bottom water, the minimum suction water level can be up to 2 mm. No return water if a backflow p... Read MoreLiquid Temperature Range (℃) 0～40 Output (W) 100 Voltage (V) 100 Remaining Water Level (mm) 2 Discharge Diameter (Φmm) 25 Discharge Rate (L/min) 35 Mass (kg) 4.0 Type For non-automatic / low water Type of Power Cable (mm2 × Number of Cores × m) VTC0.75×2×3.5
- KOSHIN Submersible Pump for Sewage Diameter 32 mm YK SeriesA submersible pump that is convenient for draining sewage at an affordable price! There is also a type with a float that can be operated automatically. Please check the frequency 50HZ or 60HZ before purchasing. For transfer of sewage * Please check the model size carefully before purchasing.Output (kW) 0.18 Voltage (V) 100 Dimensions (Width W x Height H) (mm) 216×310 Opening Diameter (mm) 32 Discharge Diameter (Φmm) 32 Power Cable (m) 4 2018 Trusco page 7 0715 Maximum Lifting (m) 7.5 Specification For sewage Power Input (V) Single phase 100from ₱11,508.58Min. 2 days
- TERADA PUMP MFG. Small Submersible PumpUses an automatic liquid level control method, and starts and stops automatically. An open impeller that is resistant to sewage passing through a strainer and can be used in a wide range of applications. Continuous operation is possible with an oil bath type mechanical seal. Built-in automatic bu... Read MoreLiquid Temperature Range (℃) 0～40 Poles of Motor 2 Electric Motor Dry type underwater motor Type Independent automatic Structure (Shaft Seal) Mechanical seal Material (Spindle) SUS420J1 or 2 Structure (Impeller) Semi-open Applicable Liquid Shimizu, sewage Cabtire Cable Type VCT
- TERADA PUMP MFG. Submersible Pump for ConstructionSubmersible pump for drainage containing fresh water, sewage, and earth and sand. It is small and lightweight. Made of special resin and special synthetic rubber with improved wear resistance and durability. It can be used for water containing earth and sand. It is hard to clog and easy to mainta... Read MoreDischarge Rate (L/min) 110 Remaining Water Level (mm) 20 Output (W) 220 Dimensions (H x W x D) (mm) 314×155×155 Discharge Diameter (Φmm) 40/50 Power Cable (m) 5 Minimum Operation Water Level (mm) 50 Mass (kg) 6.5 Specification Dual adapter standard equipment Suitable Liquid Fresh water, sewage, sediment water Material (Spindle) SUS Voltage (V) Single phase 100 Material (Impeller) Synthetic rubber Material (Casing) Synthetic rubber
- TSURUMI MANUFACTURING Liquid Level Sensors Float Switches RF TypeA single float detects upper and lower water levels. ON-OFF operation by snap action works even with clean water, sewage water, or liquid mixed with floating dirt, grease, etc. It comes with a cable clamp that allows you to easily adjust the hanging length. Uses oil and chlorine resistant cables.... Read MoreOuter Diameter (Φmm) (Cable) 6.5 Operating Patterns (Maximum control width) 3m Liquid temperature (℃) 0～50 Mass (g) 204 (Float only) Number of Cores x Sectional Area (mm2) 2×0.5 Rated Output Capacity (VA) 50 Frequency (Hz) 50/60 Rated Capacity 50VA Water pressure resistance (kPa) 98 Current (A) AC/DC 2 Voltage (V) AC/DC 30 Maximum Operating Current (A) AC/DC2 (inductive load) Type For position detection Contact Mechanism Microswitch Contact a contact
- TERADA PUMP MFG. Small submersible pumpAn oil bath system is used for the mechanical seal, enabling continuous operation. The motor has a built-in automatic burnout prevention device. For drainage of sewage and spring water, for water injection and replacement of farmed fish tanks. Spiral method to increase pump efficiency. The pump p... Read MoreCabtire Cable (mm2 × m) 0.75×4 Liquid Temperature Range (℃) 0～40 Voltage (V) 100 Dimensions, Diameter x Height H (Φmm x mm)Φ 136×244 Output (W) 150 Poles of Motor 2 Discharge Diameter (Φmm) 32 Mass (kg) 4.3 Lifting Height (m) 5 Discharge Rate (L/min) 80 Structure (Bearing) Ball bearing Electric Motor Dry type underwater motor Connector Hose coupling connection Structure (Shaft Seal) Mechanical seal Type Non-automatic Material (Spindle) SUS420J1 or 2 Structure (Impeller) Semi-open Applicable Liquid Shimizu, sewage Material (Casing) Synthetic resin Material (Impeller) Synthetic resin Cabtire Cable Type VCT
- SHOWA Float Switch OLVThe float switch OLV type is an oil level detection device that can electrically capture the oil level in the tank as an ON or OFF signal. You can activate the relay to stop the machine, turn on the lamp, sound the buzzer, and so on. Since the upper and lower limits of operation are equipped with... Read MoreOperating Temperature Range (℃) -20～+80 Insulation Resistance (MΩ) 100 or more (with DC500V mega) Cable Length (m) 400 Maximum Switching Current AC0.33A、DC1.0A Withstand Voltage (V) AC1000 (1 minute) Maximum switching voltage (V) AC250、DC200 Maximum Switching Capacity AC30VA、DC50W Contact Resistance (Ω) Contact / 0.1 or less
- TSURUMI MANUFACTURING Submersible high spin pump for low water level drain + LSR typeThe rubber bellows on the suction side of the suction cover allows water to be absorbed through the side slit even if the bottom strainer is clogged. Water-resistant special urethane rubber is used for the impeller, achieving about three times the abrasion resistance of FCD700. In addition, even ... Read MoreOutput (kW) 0.48 Suitable Cable Outer Dia. (Φmm) 10.1 Mass (kg) 10.5 Discharge Rate (L/min) 120 Dimension D (Φmm) 210 Dimension H (mm) 304 Remaining Water Level (mm) 5 Cable Length (m) 5 Discharge Diameter (Φmm) 50 Diameter of Foreign Object to Pass (Φmm) 6 Lifting Height (m) 8 Type Non-automatic type Voltage (V) Single phase 100 Material (Cable) VCT
- KOSHIN Submersible Pump for Sewage Diameter 32 mm PSK SeriesThere is also an automatic operation type with a float that is easy to use for sewage drainage and has outstanding durability. Please check the float, frequency, etc. before purchasing.Output (kW) 0.15 Voltage (V) 100 Dimensions (Width W x Height H) (mm) 180×278 Discharge Diameter (Φmm) 32
- Sakuragawa Pump Mfg. Float switch for automatic water level control (piggyback)Simply plug it into the power plug of your single-phase pump and it will be transformed into an automatic drainage pump right away. To adjust the exercise water level and stop water level, just move the stopper ring. You can easily change the water level control range according to the amount of w... Read MoreRated Capacity (W) 400 Voltage (V) Single phase 125 Power Cable (m) 6 Current (A) 10 Maximum Operating Temperature (℃) 50
- ShinMaywa Industries ShinMaywa Oval FloatControls upper and lower limits with one unit. (Two are required if the control width exceeds 1m.) The structure prevents chattering. Polypropylene is used for the case to prevent foreign matter from adhering to it. Installation is as simple as hanging. It can be installed even in a relatively na... Read MoreLiquid Temperature Range (℃) 0～60 Maximum Current (A) 0.6 Voltage (V) AC, DC 30 or less Maximum voltage (V) 30 Contact A contact
- TERADA PUMP MFG. Submersible pump for wasteAll wetted parts are made of resin and stainless steel (SUS304). It is rust resistant and has excellent durability. Achieves significant weight reduction while maintaining strength. The discharge direction can be easily set to either vertical or horizontal. (Excluding 1.5kW and 2.2kW) Combined tr... Read MorePoles of Motor 2 Electric Motor Dry type underwater motor Connector Flange connection Type Non-automatic Material (Spindle) SUS304 Structure (Bearing) Sealed ball bearingfrom ₱20,554.26Min. 2 days
- KOSHIN Submersible Pump for Sewage Diameter 40/50 mm PX SeriesResistant to earth and sand! Easy to use for drainage of sewage, excellent durability, with float, frequency, please choose according to specifications. For transfer of sewage * Please check the model size carefully before purchasing.Output (kW) 0.4 Lifting Height (m) 10 Voltage (V) 100 Minimum Operation Water Level (mm) 100 Mass (kg) 11 Remaining Water Level (mm) 20 Power Cable (m) 5 Type Non-automatic driving type
- TERADA PUMP MFG. Submersible pump for earth and sand mixed water Super AceIt has unrivaled wear resistance in the 200-500W class. It has a built-in electric motor protection device. It is small, lightweight and easy to handle. Uses a new shaft sealing system and special resin / synthetic rubber. Abrasion resistance and durability have been greatly improved. The newly d... Read MorePower Cable (m) 5 Type Non-automatic driving type Voltage (V) Single phase 100
- KOSHIN Submersible Pump for Freshwater Diameter 25 mm YK SeriesThere is also a type with a float that can be automatically operated for fresh water by reusing the remaining hot water in the bath for watering around the house. Please check the frequency 50HZ or 60HZ before purchasing. For the transfer of fresh water * Please check the model size carefully bef... Read MoreOutput (kW) 0.18 Voltage (V) 100 Opening Diameter (mm) 25 Discharge Diameter (Φmm) 25 Power Cable (m) 4 2018 Trusco page 7 0715 Continuous Operating Time 8 Maximum Lifting (m) 9.5 Maximum Pumping Rate (L/min) 95 Discharge Rate (L/min) 95 Specification For Shimizu Power Input (V) Single phase 100from ₱8,219.24Min. 2 days
- AS ONE Small Submersible PumpComplete diving is possible. Continuous operation is possible.Connector Diameter 1/2 inch hose connection Maximum Flow Rate (L/min) 18 As ONE Part Number 3-8561-01 Cable Length (m) 4 Rated Current (A) 4.5 Mass (g) 500 Lifting Height (m) 9.7 Power Input (V) DC12 Suitable Fluid Fresh water, sea water, light oil Size Φ38×165mm
- TSURUMI MANUFACTURING Sweep pump for residual water absorption and drainage + LSP typeBy adopting Tsurumi's original high-spin impeller, it has a structure that is resistant to wear and difficult to <lock> due to sand and mud. The check valve of the core siphon breaker mechanism prevents backflow and drainage of pumped water due to the siphon phenomenon when the pump is ... Read MoreOutput (kW) 0.48 Operating Temperature Range (℃) 0～40 Mass (kg) 12.5 Number of Poles 2 Discharge Diameter (Φmm) 25 Trusco Part No. 281-0280 Synchronous Speed (min -1 ) 3600 Cable Length (m) 5 Discharge Rate (L/min) 55 Frequency (Hz) 60 Lifting Height (m) 7.8 Motor Dry type submersible induction motor Type Non-automatic type Voltage (V) Single phase 100from ₱61,634.01Min. 2 days
- KOSHIN Submersible Pump for Sewage Diameter 40 mm PSK-X SeriesEffortless discharge of even 2.5cm solid waste from livestock barns. Please check the float, frequency, etc. before purchasing. For transfer of sewageOutput (kW) 0.15 Voltage (V) 100 Remaining Water Level (mm) 110 Motor Output (W) 150 Minimum Operation Water Level (mm) 160 Maximum Pumping Rate (L/min) 170 Discharge Rate (L/min) 170 Dimensions (Width W x Height H) (mm) 215×344 Diameter of Foreign Object to Pass (Φmm) 25 Power Cable (m) 4 Discharge Diameter (Φmm) 40 Mass (kg) 5.3 Continuous Operating Time 8 Type For filth Specification For filth Suitable Liquid Waste water
- TERADA PUMP MFG. Hose Nipple for Submersible Pump for Sewage (PGA400)The external screw is cut.Output (kW) 0.4 Voltage (V) 100 Discharge Rate (L/min) 40/170 Discharge Diameter (Φmm) 50 Lifting Height (m) 9.5/5 Material (Casing) ABS Color Black Suitable for For 50MMfrom ₱1,603.14Min. 2 days
- TERADA PUMP MFG. Stainless steel submersible pump CSA type (automatic)Wetted parts are completely rust-proof. The endurance is also greatly improved. Simple structure for easy maintenance and inspection. Lightweight and small size of 4.0 kg and easy to use. The float detects the water level and automatically starts and stops pumping. Aquaculture, fish culture circu... Read MoreVoltage (V) 100 Output (W) 100 Discharge Diameter (Φmm) 25 Discharge Rate (L/min) 35 Starting water level (maximum) (mm) 380 Mass (kg) 4.0 Remaining Water Level (mm) 90 Stop Water Level, Minimum (mm) 90 Material (Casing) ABS (acrylonitrile butadiene resin) Type For Shimizu Type of Power Cable (mm2 × Number of Cores × m) VTC0.75×2×3.5from ₱26,721.78Min. 2 days
- TERADA PUMP MFG. Submersible waste pumpA unique vortex generation mechanism guides solids with a vortex and expels clogging in the pump. Uses an oil bath type mechanical seal. In addition, the electric motor has a built-in automatic burnout prevention device. For building civil engineering For industrial equipment For plant incorporat... Read MoreLiquid Temperature Range (℃) 0-40 (no freezing) Cabtire Cable (mm2 × m) 0.75×4 Discharge Rate (L/min) 100 Output (W) 150 Poles of Motor 2 Length of Foreign Object to Pass (mm) 20 Diameter of Foreign Object to Pass (Φmm) 28 (maximum) Lifting Height (m) 3.5 Discharge Diameter (Φmm) 40 Structure (Bearing) Ball bearing Electric Motor Dry type underwater motor Structure (Shaft Seal) Mechanical seal Connector Screw connection Applicable Liquid Shimizu, sewage Voltage (V) Single phase 100 Material (Impeller) Synthetic resin Material (Casing) Synthetic resin Cabtire Cable Type VCT Structure (Impeller) Vortex
- TSURUMI MANUFACTURING Small submersible sludge pump + HSD typeThe adoption of a high-spin type impeller with a high-gap structure makes it resistant to sand locks, and the adoption of high-chromium cast iron provides reliable wear resistance. Equipped with a motor with a motor output of 0.55 kW, it has leeway even in the harsh conditions of muddy water drai... Read MoreOutput (kW) 0.55 Discharge Rate (L/min) 100 Mass (kg) 15 Cable Length (m) 5 Discharge Diameter (Φmm) 50 Diameter of Foreign Object to Pass (Φmm) 9 Lifting Height (m) 9 Type Non-automatic type Voltage (V) Single phase 100from ₱27,544.11Min. 2 days
- ELEPON Level switch for liquid level controlA balance weight is attached to the tip of the float to make the operating point more accurate. It is resistant to dirt, scum, floating matter, and oily water, and does not resist chattering (wavy) or rust. An oil-resistant special flexible vinyl cable is used for the cable. The tip is completely... Read MoreSpecific gravity range Usable liquids: 0.6 to 1.1 Contact A contact Dimensions (Width W x Height H) (mm) Φ82×135 Maximum Current (A) 0.6 Cable Length (m) 6 Liquid Temperature Range (℃) 0～50from ₱5,341.07Min. 2 days
- TERADA PUMP MFG. Submersible pump for wasteLightweight, compact and hard to clog. All wetted parts are made of resin and stainless steel, which is resistant to rust and has excellent durability. A new mechanism that can change the discharge direction in either "vertical" or "horizontal". Back pull-out structure that ca... Read MoreLiquid Temperature Range (℃) 0 to 40 (no freezing) Remaining Water Level (mm) 140 Stop Water Level, Minimum (mm) 140 Poles of Motor 2 Diameter of Foreign Object to Pass (Φmm) 35 (max) Starting water level (maximum) (mm) 460 Type Automatic Structure (Shaft Seal) Double mechanical seal Electric Motor Dry type underwater motor Connector Flange connection Material (Spindle) SUS304 Structure (Bearing) Sealed ball bearing Applicable Liquid Sewage, water containing filth Material (Casing) Synthetic resin Material (Impeller) Synthetic resin Length of Foreign Object to Pass (mm) Up to 150 Structure (Impeller) Vortex
- EBARA Submersible pump for fresh water / sewage stainless steelLightweight, compact and easy to carry. Two types, automatic and non-automatic, are available. The wetted parts are all made of stainless steel. Watering of agricultural work, drainage of underground garage, pit drainage of machine room / basement, drainage of rainwater / spring / pool water, cle... Read MoreMaterial (Casing) (Outer) SUS304 Shank Diameter (Φmm) (Shaft seal) 12 Output (kW) 0.2 Diameter of Foreign Object to Pass (Φmm) 10 Outer Diameter (Φmm) 10.1 Discharge Rate (L/min) 100 Number of Poles 2 Number of Cores 3(1.25mm2 ) Discharge Diameter (Φmm) 32 Maximum Submersion Depth of Pump (m) 4 Lifting Height (m) 5 Rated Current (A) 5.2 Minimum Operation Water Level (mm) 60 Built-in Protection Device Auto cut Starting Method Capacitor Type Lubricating oil liquid paraffin / 40mL Heat Resistance Class F Material (Shaft Seal Filling Liquid) Liquid paraffin Bearing Identification Number Load side/6200ZZ Anti-load side/6000ZZ Material (Spindle) SUS303 Material (Frame) SUS304 Material (Impeller) SUS304 Piping connection method Screw-in type Structure (Bearing) Sealed ball bearing Structure (Impeller) Semi-open Voltage (V) Single phase 100 Material (Cable) VCT
- EBARA Float Switch for Water Level ControlIdeal for sewage. Easy to install. Just hang it up and you're done. High buoyancy and reliable operation. The switch is triple protected and safe against impact. In consideration of environmental pollution in the unlikely event, it is a reed switch system. Water level control of sewage sewage... Read MoreWithstand Pressure (MPa [kgf/cm2]) 0.1 Maximum Current (A) 0.5 Maximum voltage (V) 24 Cable Length (m) 6 Contact A contact Type Reed switch Specification Reed switch
- TSURUMI MANUFACTURING Submersible High Spin Pump for General Construction Drainage LBA TypeLB type boasting a proven track record and reliability. Adopting a high-spin type impeller with a high-gap structure, it is resistant to wear and has impeller characteristics that reduce performance deterioration even when worn. It is a design with less <lock> due to sand etc. Discharge dir... Read MoreOperating Temperature Range (℃) 0～40 Suitable Cable Outer Dia. (Φmm) 10.1 Mass (kg) 11 Remaining Water Level (mm) 115 Dimension W1 (mm) 115 Dimension D (Φmm) 187 Number of Poles 2 Dimension B1 (mm) 228 Dimension H (mm) 286 Dimension B (mm) 286 Cable Length (m) 5 Diameter of Foreign Object to Pass (Φmm) 6 Material (Frame) ADC12 (motor) Type Automatic type Starting Method Capacitor operation Motor Dry type submersible induction motor Structure (Impeller) High spin Connector Hose coupling Built-in Protection Device Miniature protector Insulation Class Motor: Class E Lubrication Motor: Turbine oil VG32 Material (Suction Cover) SPC + urethane rubber Material (Spindle) SUS403 Structure (Bearing) Sealed ball bearing Material (Shaft Seal) SiC (mechanical seal) Voltage (V) Single phase 100 Material (Casing) Synthetic rubber (pump) Material (Impeller) Urethane rubber (pump) Material (Cable) VCT(3×1.25)from ₱32,066.95Min. 2 days
- TSURUMI MANUFACTURING Submersible High Spin Pump LSRE Type for Low Water Level DrainageThe rubber bellows on the suction side of the suction cover allows water to be absorbed through the side slit even if the bottom strainer is clogged. Water-resistant special urethane rubber is used for the impeller, achieving about three times the abrasion resistance of FCD700. In addition, even ... Read MoreOutput (kW) 0.48 Remaining Water Level (mm) 10 Voltage (V) 100 Mass (kg) 11.1 Discharge Rate (L/min) 120 Discharge Diameter (Φmm) 50 Diameter of Foreign Object to Pass (Φmm) 6 Lifting Height (m) 8 Type Automatic type Suitable Liquid Low water drainagefrom ₱40,290.30Min. 2 days
- ShinMaywa Industries Mini float for liquid level controlOperating Temperature (℃) 0～60 Cable Length (m) 6 Material (Case) ABS resin Voltage (V) AC, DC 30 or less Material (Cable) PVC Working Current (A) Up to 0.5from ₱3,617.86Min. 2 days
