Pump Parts / Accessories

Pump coupling set For connecting pumps and hoses. Set of bamboo shoots, couplings, and coupling packings Please check the screw diameter and bamboo shoot diameter before purchasing. For connecting pumps and hoses. * Please check the model size carefully before purchasing.

For preventing sagging after refueling and storing pumps.

Effective in alleviating bad odors in septic tanks and promoting purification When you want to suppress the bad smell of septic tank * Please check the model size carefully before purchasing.

Suck up one drum can (200 liters) in about 10 minutes !! Easy-to-use refueling nozzle. Garbage is shut out with a mesh strainer! For the transfer of kerosene and light oil. * This product is for transferring kerosene and light oil from drums. Please do not use it for any other purpose.

Please check the model, size, key type, spline type, etc. of the impeller (blade) for seawater motor pumps and single pumps before purchasing. There are applications for seawater and oil. When replacing the impeller * Please check the model size carefully before purchasing.

It can be attached to an itto-kan with a magnet. Φ10 drain is processed on the bottom. * Because it will drip, please prepare a receiver before use.

Impeller used for 50PU2.4S. Can be used in combination with some other models. *Do not use the product outside of the determined product specifications. It may cause electric leakage, electric shock, fire, etc. Please check the compatible model before purchasing. We cannot accept returns due to t... Read More

Float set used for 50PUA2.4S. Can be used in combination with some models. *Do not use the product outside of the determined product specifications. It may cause electric leakage, electric shock, fire, etc. Please check the compatible model before purchasing. We cannot accept returns due to the w... Read More

Please check the model size carefully before purchasing for repair or replacement when the coupling packing for the pump deteriorates. For repair / replacement * Please check the model size carefully before purchasing.

When you want to wash and sprinkle water with a small engine pump, use it by tightening with a hose connection diameter 25 mm hose band. When you want to clean and sprinkle water with an engine pump * Please check the model size carefully before purchasing.

One-touch coupling for small submersible pumps One-touch attachment / detachment is OK, easy and convenient! Please check the model size carefully before purchasing. For connecting the pump and hose * Please check the model size carefully before purchasing.

Used for priming cap and drain cap of engine pump. Please check the model size carefully before purchasing. For repair / replacement * Please check the model size carefully before purchasing.

Resin cam lock body series that allows one-touch hose connection when using an engine pump! (25, 40, 50, 80 mm) Only the resin cam lock body attached to the pump body. * Separate cam lock body packing is required. Please check the model size carefully before purchasing. For repair / replacement *... Read More

* E-25FX is not required because the filter medium is contained in the cartridge.

* The image is a representative image. (Please note that parts other than the handle are not a set.)

Simply insert the plug into the socket and it will be set, the valve will open and the compressed fluid will flow. Simply pull on the sleeve of the socket to remove the plug and the valve inside the socket will automatically block the compressed air. The material is polypropylene, the internal sp... Read More

Engine parts series for Koshin Engine KC-26 Spark plugs, carburetors, primer pumps, main replacement parts series for air filters For repair and spare use For repair / replacement * Please check the model size carefully before purchasing.

Replacement sponge filter for Koshin Bus Pump KP series For replacement due to dirt or tear For repair / replacement * Please check the model size carefully before purchasing.

Cam lock packing series for resin cam lock that allows one-touch hose connection when using an engine pump! (25, 40, 50, 80 mm) * Please check the model size carefully before purchasing. This product has protrusions on the side surface. For repair / replacement * Please check the model size care... Read More

* Measurable range (10 mg / L or less) * Does not react with sodium hypochlorite stock solution.

It can be used as a suction hose for pumps. It can also be used as a discharge hose. Please check carefully according to the application, such as diameter and length, before purchasing. For water absorption and water supply when using a pump * Please check the model size carefully before purchasing.