Information of COVID-19

Toggle Nav
My Cart
Search
Advanced Search
All Category
All Category
Menu
Account

On-Land Pumps

A land-based pump is one that is installed on land when the pump is roughly divided into two types (installed on land or in water). Land pumps can be further divided into self-priming pumps and non-self-priming pumps. Due to the structure of the self-priming pump, once the priming water is supplied to the inside of the pump for the first time, the air in the pipe is automatically discharged to suck up the water. In contrast, the non-self-priming type requires priming water and a foot valve. The foot valve is a valve that opens when the pump absorbs water and closes when it stops.

Other Related Pages

  1. water pump 4 inch
  2. 2 inch water pump
  3. water pump motor capacity
  4. 3 inch pump
  5. 4 inch pump
  6. 2 inch water hose
  7. 3 inch electric water pump
  8. 1 4 inch hose
  9. 3 foot aquarium
  10. 100 gallon aquarium
  11. motor protection
  12. 4 inch water pump
  13. 3 inches water pump
  14. industrial manual pump for water
  15. sea water pump
  16. centrifugal pump
  17. water pump motor
  18. hydraulic test pump
  19. portable water pump
View : Grid List
Filter

Items 1 - 40 of 120

Page
Set Ascending Direction
  1. Handy Pump
    TERADA PUMP MFG. Handy Pump
    Compact, lightweight and high performance. Quiet driving noise. Wide range of applications such as household use, agriculture and fishery use, and equipment such as hot water (50 ° C or less) circulation. With motor burnout prevention protector (manual return type). Since it is valveless with a s... Read More
    Liquid Temperature Range (℃)  0~50 (no freezing)  Power Supply (Motor) (V)  100  Poles of Motor  2  Electric Motor  Drip-proof protection type  Structure (Shaft Seal)  Mechanical seal  Material (Spindle)  SUS403  Structure (Bearing)  Sealed ball bearing  Structure (Impeller)  Semi-open  Applicable Liquid  Shimizu  Material (Casing)  Synthetic resin  Material (Impeller)  Synthetic resin 
    Rating:
    91%
    (7)
    from ₱16,442.59
    Min. 2 days
  2. Cast iron line pump (fully closed motor)
    SANSO ELECTRIC Cast iron line pump (fully closed motor)
    Since many air bleeding plugs are attached, air bleeding can be easily done from any direction. The capsule type structure makes it easy to check the service after installation. The water contact part of the pump is rust-proofed. * PBU type is a union fitting
    Dimension S (mm)  -  Liquid Temperature Range (℃)  0-90 (Shimizu)  Pumping Volume (L/min) / Total Head (m) (50Hz)  - 
    Rating:
    94%
    (7)
    from ₱24,254.77
    Min. 2 days
  3. On-Land Handy Pump
    HITACHI On-Land Handy Pump
    For replacing water in the aquarium. * Do not use in hot water that exceeds 40 ° C.
    Suction height (m)  1.5  Voltage (V)  100  Power Cable (m)  2  Frequency (Hz)  50/60  Power Supply  Single phase 100V 
    from ₱16,031.42
    Min. 2 days
  4. 4 cycle engine pump
    BIG-M (Maruyama Mfg) 4 cycle engine pump
    An engine pump equipped with a lightweight mini 4-cycle engine. Since it is a 4-cycle engine, the sound is quiet. Although it is a 4-cycle engine type, it can be easily carried. Ideal for irrigating fields! Authentic engine pump. * Be sure to add engine oil (sold separately) before use. (10W-30 r... Read More
    Fuel Tank Capacity (L)  1.6  Maximum Head (m)  28  Displacement (mL)  80  Engine Type  Mitsubishi 4 cycle  Starting Method  normal 
    Rating:
    100%
    (1)
    from ₱19,320.76
    Min. 2 days
  5. Engine pump 4 cycles 1 inch / 1.5 inch
    NAKATOMI Engine pump 4 cycles 1 inch / 1.5 inch
    Two types of 1-inch / 1.5-inch water absorption hose adapters are standard equipment. Achieves powerful pumping with a 4-cycle engine with a displacement of 94 ml. For drainage work such as disasters, drainage work at factories and sites, and watering work. As a drainage pump, engine type pump, p... Read More
    Suction Head (m)  7 (when using 38mm inner diameter hose)  Maximum Lifting (m)  25 (when using 38mm inner diameter hose)  Mass (kg)  18  Dimensions, Width W x Depth D x Height H (mm)  445×350×350  Displacement (mL)  94  Inlet / Outlet Diameter (mm)  38  Starting Method  Recoil starter  Suitable Fuel  Unleaded gasoline  Output  2.0kw(2.7PS)/3600min‐1  Noise Level (dB)  87/m  Fuel Tank Capacity (L)  1.5  Warranty Period  1 year from date of purchase  Engine Type  Air-cooled 4-cycle engine 
    from ₱13,564.42
    Min. 2 days
  6. Single Pump Pabourg Pump SU Series
    KOSHIN Single Pump Pabourg Pump SU Series
    High-performance self-priming pump suitable for medium and high-pressure large amounts of water A separate engine, motor, belt, pulley, etc. are required. Please check the model size carefully before purchasing. Please choose from 25/40/50/80 mm caliber according to the specifications and applica... Read More
    Rating:
    80%
    (1)
    from ₱20,554.26
    Min. 2 days
  7. Non-automatic bilge handy pump
    HITACHI Non-automatic bilge handy pump
    For replacing dirty water. * Do not use in hot water that exceeds 40 ° C.
    Voltage (V)  100  Power Cable (m)  2  Maximum Lifting (m)  2  Suction height (m)  2  Pumped Volume (L/min)  40(50Hz)、50(60Hz)  Frequency (Hz)  50/60  Output (W)  80  Power Supply  Single phase 100V 
    from ₱24,665.94
    Min. 2 days
  8. Engine Pump Caliber 80 mm 4 Cycle Series
    KOSHIN Engine Pump Caliber 80 mm 4 Cycle Series
    It is equipped with an engine pump 4-cycle engine with a diameter of 80 mm that can fill a large amount of water when irrigating or drought in the fields, and uses unleaded gasoline engine oil for automobiles as fuel. Please select according to the application such as the installed engine and per... Read More
    Noise Level (dB)  -  Material  Pump ADC 
    from ₱35,356.29
    Min. 5 days
  9. Non-automatic bilge pump
    HITACHI Non-automatic bilge pump
    For circulation and replacement of water in the pond.
    Rating:
    60%
    (1)
    from ₱41,075.63
    Min. 5 days
  10. Cold / hot water circulation pump (cast iron)
    SANSO ELECTRIC Cold / hot water circulation pump (cast iron)
    Lightweight and robust due to the use of an aluminum case for the motor frame. Long-life cooling because the bearing is shielded from the outside air. Low noise due to the newly designed fan.
    Liquid Temperature Range (℃)  0-90 (Shimizu)  Allowable Boost Pressure (kPa)  200  Motor Protector  Manual return  Installation Location  Outdoor installation possible 
    from ₱40,290.30
    Min. 5 days
  11. Cell Platecpon with drip-proof protection motor
    TERADA PUMP MFG. Cell Platecpon with drip-proof protection motor
    There is no hassle of priming, and the casing is pumped with water only once at the beginning, and it is pumped at the same time as operation without the need for subsequent water injection. Since resin and stainless steel (SUS304) are used for the wetted parts, it is resistant to rust and seawat... Read More
    Output (kW)  0.1  Number of Poles  2  Opening Diameter (Φmm)  25  Discharge Rate (L/min)  35  Mass (kg)  4  Maximum Lifting (m)  4.6  Trusco Part No.  406-4704  Frequency (Hz)  50  Bearing type  Ball bearing  Type  Self-priming  Blade Style  Semi-open  Power Input (V)  Single phase 100 
    from ₱26,310.61
    Min. 2 days
  12. Non-Automatic Hot Water Circulation Pump
    HITACHI Non-Automatic Hot Water Circulation Pump
    For central heating. * Keep the pressure applied to the pump 100 kPa or less at all times.
    Voltage (V)  100  Power Cable (m)  2  Power Supply  Single phase 100V 
    from ₱32,066.95
    Min. 6 days
  13. Non-automatic fugal pump
    HITACHI Non-automatic fugal pump
    For snowmelt, agriculture, and pond water supply.
    Suction height (m)  7 
    Rating:
    100%
    (1)
    from ₱73,969.04
    Min. 6 days
  14. On-Land Pump MP Type
    TERADA PUMP MFG. On-Land Pump MP Type
    ・ Integrated pump and electric motor, ultra-compact and lightweight type with simple structure realizes large-capacity discharge capacity ・ Expands specification range and supports a wide range of applications ・ Electric motor and shaft seal are completely oil-free and extremely easy to handle... Read More
    from ₱61,634.01
    Min. 12 days
  15. Power cistern
    HITACHI Power cistern
    In places where tap water is poor or where water pressure is insufficient. * Please note that the piping pressure on the discharge side will be higher than the opening pressure of the pressure switch during use. * Flush valves and direct pressure toilets (tankless toilets) cannot be used. The wat... Read More
    Type  20mm double ball tap  Power Cable (m)  2  Voltage (V)  100  Power Supply  Single phase 100V  Motor type  100W condenser run motor  Mass (kg)  23  Water Supply (L/min)  20 (50 Hz), 25 (60 Hz) (at 8 m head)  Motor Voltage (V)  Single phase 100  Motor Output (W)  205(50Hz)、300(60Hz)  Output (W)  100  Water storage capacity (L)  10  Pushing height (m)  8  Frequency (Hz)  50/60  Pressure Switch Specifications  (ON)110kPa、(OFF)170kPa 
    from ₱73,969.04
    Min. 4 days
  16. Gunmetal cascade pump
    SANSO ELECTRIC Gunmetal cascade pump
    Achieves a high lift by adopting the cascade method. Since the wetted part is made of gunmetal, there is no rust from the pump. For circulation, for incorporating various devices, for small diversion, and for applications that require high lift. * Conditions for handling liquid Atmospheric temper... Read More
    Frequency (Hz)  50/60  Motor Protector  Automatic return  Installation Location  For indoor installation  Allowable Boost Pressure (kPa)  under 100 
    from ₱53,410.66
    Min. 5 days
  17. Gunmetal line pump (magnet type)
    SANSO ELECTRIC Gunmetal line pump (magnet type)
    Super quiet The PMG type is a fully closed type in which a heat-resistant resin is sealed inside the motor. The bearing uses low-noise ball bearings, and the impeller is optimally shaped together with the pump casing, which is 30db down at a distance of 30cm, which is about 15db down from the con... Read More
    Liquid Temperature Range (℃)  0-90 (Shimizu)  Motor Voltage (V)  100  Voltage (V)  100  Allowable Boost Pressure (kPa)  300 or less  Mass (kg)  5.3  Installation Location  For indoor installation 
    from ₱32,889.29
    Min. 5 days
  18. Self-priming corrosion-resistant resin spiral pump Sempon Ace
    CEM Corpration Self-priming corrosion-resistant resin spiral pump Sempon Ace
    Even if the mechanical seal leaks, the shatterproof plate prevents it from entering the motor. A new material is used for the casing, and it has excellent corrosion resistance! The compact design does not require much installation space. Quiet driving noise with a low-noise electric motor. The me... Read More
    Liquid temperature (℃)  0～40  Mass (kg)  11  Power supply specifications  200V3Φ  Opening Diameter (mm)  40  Rated Output (W)  400  Applicable Liquid  Shimizu, chemical liquid, seawater  Voltage (V)  Three-phase 200 
    from ₱82,192.39
    Min. 7 days
  19. Engine Pump Caliber 40 mm 4 Cycle Series
    KOSHIN Engine Pump Caliber 40 mm 4 Cycle Series
    It is equipped with a 40 mm caliber engine pump 4-cycle engine that can be easily used for irrigating fields and cleaning agricultural machinery, and uses unleaded gasoline and engine oil for automobiles as fuel. Select according to the application such as the installed engine and double flange (... Read More
    Noise Level (dB)  -  Suction / Discharge Port Diameter  40  Suction Head (m)  8  Material  Pump ADC  Suitable Fuel  Unleaded gasoline for automobiles 
    from ₱26,721.78
    Min. 5 days
  20. Serpra Techpon
    TERADA PUMP MFG. Serpra Techpon
    The wetted parts use new materials and stainless steel. Multi-type that is resistant to rust. High performance is demonstrated by the combination of the impeller analyzed by the waterway and the internal casing. A compact and quiet driving sound that integrates a low-noise electric motor and a pu... Read More
    Type  Cell plastic pump  Material (Casing)  Glass fiber reinforced resin  Structure (Bearing)  Sealed ball bearing 
    Rating:
    100%
    (1)
    from ₱57,522.34
    Min. 12 days
  21. Onshore pump CMP type
    TERADA PUMP MFG. Onshore pump CMP type
    -The wetted parts use new materials and stainless steel. Rust-resistant multi-type ・ By combining impeller and internal casing that have been analyzed for waterways, high performance is demonstrated ・ Low noise motor and pump are integrated, compact and quiet driving noise ・ The shaft seal is ... Read More
    Type  Cell plastic pump 
    from ₱61,634.01
    Min. 12 days
  22. Hot water pressurizing pump (pressure switch, flow switch type)
    SANSO ELECTRIC Hot water pressurizing pump (pressure switch, flow switch type)
    Pressure / flow rate switch type. It is in a state where it can be pressurized at all times, and when hot water is started, the pressure drop in the pipe is detected and the pump is operated, and when the water flow is stopped (the faucet is closed), the flow is detected and the pump is stopped. ... Read More
    Rated Voltage (V)  (Motor) 100  Ambient Temperature (℃)  40  Water Temperature (℃)  85 or less  Motor Protector  Automatic return  Installation Location  Outdoor installation possible 
    from ₱82,192.39
    Min. 6 days
  23. Automatic hot water pressurizing pump
    HITACHI Automatic hot water pressurizing pump
    Reduces insufficient pressure for hot water supply. * The hot water pressurization pump cannot be used for showers and faucets where the amount of hot water supplied cannot be obtained at 2.5 L / min or more when the pump is stopped. If it is 2.5 L / min or less, the flow switch will not operate ... Read More
    Voltage (V)  100  Power Cable (m)  2  Power Supply  Single phase 100V 
    Rating:
    100%
    (1)
    from ₱53,410.66
    Min. 5 days
  24. Stainless steel line pump (magnet type)
    SANSO ELECTRIC Stainless steel line pump (magnet type)
    Magnet coupling structure (sealless) Exile liquid leakage. Long life. Stainless steel casing High pressure resistance (0.75MPa) Since it is a magnet pump with a stainless steel casing, it achieves a high withstand voltage of 0.75MPa. Robust stainless steel casing and sealless structure make it hi... Read More
    Liquid Temperature Range (℃)  0-90 (Shimizu)  Rated Voltage (V)  100  Allowable Boost Pressure (kPa)  750 or less  Installation Location  For outdoor use  Material (impeller)  Modified PPO glass 30%  Material (Flange)  SCS13  Material (Casing)  SCS13  Number of Phases  Single-phase  Material (Bearing)  carbon 
    from ₱57,522.34
    Min. 5 days
  25. Non-automatic bilge pump
    HITACHI Non-automatic bilge pump
    Mass (kg)  20  Output (W)  200  Maximum Lifting (m)  4  Suction height (m)  6  Pumped Volume (L/min)  95 
    from ₱53,410.66
    Min. 3 days
  26. Cell plastic engine pump
    TERADA PUMP MFG. Cell plastic engine pump
    Compact design. Powerful compact and lightweight type. Handy type and easy to move. For construction civil engineering, agriculture, fishery, household
    from ₱102,750.76
    Min. 6 days
  27. 14L water supply pump
    ESCO 14L water supply pump
    Esco Part No.  EA872ZP-2A 
    from ₱20,554.26
    Min. 6 days
  28. Cell plate pump (without motor)
    TERADA PUMP MFG. Cell plate pump (without motor)
    New material and stainless steel (SUS316) are used for the wetted parts. Multi-type that is resistant to rust and seawater. High performance is demonstrated by combining a semi-open impeller and casing that have been analyzed for waterways.
    Liquid Temperature Range (℃)  0～40  Poles of Motor  2  Synchronous Speed (min -1 )  3600  Frequency (Hz)  60  Electric Motor  Fully enclosed external fan indoor type  Material (Impeller)  Glass fiber reinforced resin  Material (Casing)  Glass fiber reinforced resin  Structure (Shaft Seal)  Mechanical seal  Material (Spindle)  SUS304  Connector  Screw connection  Structure (Bearing)  Sealed ball bearing  Applicable Liquid  Shimizu  Power Supply (Motor) (V)  Three-phase 200/220 
    from ₱106,862.44
    Min. 7 days
  29. Automatic water supply single type
    HITACHI Automatic water supply single type
    For water supply in 3- to 6-story store-combined houses and offices. * There are two types, one for 50Hz and the other for 60Hz. Use the one that matches the power supply and frequency. * Do not use for iron sterilization system / sterilizer. * Flush valves and direct pressure toilets (tankless t... Read More
    Maximum Lifting (m)  18  Suction height (m)  Suction 3 to push 6 
    from ₱189,095.94
    Min. 5 days
  30. Engine pump
    NAKATOMI Engine pump
    A small engine pump that is convenient to carry. Also active in drainage work at factories and sites, watering work, and drainage work such as disasters. For irrigation of fields, watering for gardening, drainage work at sites, etc.
    Type  Engine pump 
    from ₱12,330.91
    Min. 7 days
  31. 5.17PS / 100mm engine pump (4 cycles)
    ESCO 5.17PS / 100mm engine pump (4 cycles)
    Opening Diameter (mm)  100  Maximum Pumping Rate  1250L / min  Esco Part No.  EA345K-1A  Maximum Lifting (m)  Up to 26.5 
    from ₱123,309.14
    Min. 6 days
  32. Automatic water supply alternate type
    HITACHI Automatic water supply alternate type
    For automatic water supply of 3 to 6 floor buildings, condominiums, apartments, etc. * Do not use for iron sterilization system / sterilizer. * Flush valves and direct pressure toilets (tankless toilets) cannot be used. (The water may be cut off.) * Since it is a non-self-priming type, attach a c... Read More
    Function  Freezing prevention  Maximum Lifting (m)  18  Suction Port Diameter (Φmm)  40  Frequency (Hz)  50  Discharge Diameter (Φmm)  40  Pressure (kPa)  (Pressure sensor) ON: 270, OFF: 280 
    from ₱320,669.54
    Min. 5 days
  33. Non-automatic water supply device
    HITACHI Non-automatic water supply device
    For water supply of elevated tanks. * Since it is a non-self-priming type, attach a commercially available foot valve (check valve) to the suction pipe when using suction.
    Frequency (Hz)  50  Suction height (m)  Suction 3-Push 6  Discharge Diameter (Φmm)  40  Mass (kg)  28  Water Supply (L/min)  135 (when the total head is 18m)  Power Consumption (W)  1100  Maximum Lifting (m)  18  Output (W)  750  Suction Port Diameter (Φmm)  40  Power Input (V)  Three-phase 200 
    from ₱94,527.41
    Min. 5 days
  34. Engine Pump Caliber 50 mm 4 Cycle Series
    KOSHIN Engine Pump Caliber 50 mm 4 Cycle Series
    It is equipped with a 40 mm caliber engine pump 4-cycle engine that can be easily used for irrigating fields and cleaning agricultural machinery, and uses unleaded gasoline and engine oil for automobiles as fuel. Select according to the application such as the installed engine and double flange (... Read More
    Noise Level (dB)  - 
    from ₱28,777.61
    Min. 5 days
  35. On-Land Pump O-M Type (3-Phase 200V without Motor)
    TERADA PUMP MFG. On-Land Pump O-M Type (3-Phase 200V without Motor)
    -Adopts a specially structured casing, with reliable self-priming capacity and excellent pump efficiency.-The impeller is an open type, and it is possible to pump water mixed with earth and sand that passes through the strainer, sewage, etc.-The shaft seal part does not have to worry about water ... Read More
    from ₱53,410.66
    Min. 14 days
  36. AC100V / 60W (50 / 60Hz) / 18mm handy pump
    ESCO AC100V / 60W (50 / 60Hz) / 18mm handy pump
    Size  143(W)×253(D)×279(H)mm  Pumped Volume (L/min)  23 (50Hz: 2m head), 28 (60Hz: 2m head)  Power Consumption  50Hz:130W 60Hz:190W  Frequency (Hz)  60  Output  60W  Power Supply  AC100V  Specification  For indoor use  Type  For indoor use 
    from ₱19,731.93
    Min. 4 days
  37. AC100V/480W/25mm Suck top pump
    ESCO AC100V/480W/25mm Suck top pump
    Opening Diameter (mm)  25  Output  480W  Power Supply  AC100V  Where to Use  Factories, etc. 
    from ₱57,522.34
    Min. 6 days
  38. Onshore pump P type (pair pump) without motor
    TERADA PUMP MFG. Onshore pump P type (pair pump) without motor
    The combination of the intermediate plate and the middle body and the impeller with a special structure makes the operation extremely quiet. The unique self-priming mechanism ensures reliable self-priming performance without reducing the pump efficiency. No need to refuel The shaft seal uses a gl... Read More
    from ₱123,309.14
    Min. 9 days
  39. Amphibious pump
    KENIS Amphibious pump
    The motor part is completely molded and can be used underwater. For both freshwater and seawater.
    Voltage (V)  AC100  Power Supply  AC100V 
    from ₱14,797.92
    Min. 23 days
  40. Cell plastic pump (without motor single-phase 100V)
    TERADA PUMP MFG. Cell plastic pump (without motor single-phase 100V)
    Adopting a special structure of caging, the self-priming capacity is reliable and the pump efficiency is outstanding. The impeller is an open type and can also pump sediment-mixed water and sewage that pass through the strainer.
    Liquid Temperature Range (℃)  0 to 40 (Do not freeze)  Dimension d (mm)  12  Dimension nh (mm)  2-10  Poles of Motor  4  Dimension N (mm)  50  Dimension b (mm)  65  Dimension c (mm)  73  Dimension a (mm)  98  Structure (Bearing)  Ball bearing  Type  Cell plastic pump  Electric Motor  Drip-proof protection type  Material (Impeller)  FC200  Material (Casing)  FC200  Structure (Shaft Seal)  Gland packing  Flange  Oval  Structure (Impeller)  Semi-open  Applicable Liquid  Shimizu, sewage  Power Supply (Motor) (V)  Single phase: 100 
    from ₱41,075.63
    Min. 6 days
View : Grid List
Filter

Items 1 - 40 of 120

Page
Set Ascending Direction