* Please use after extinguishing the fire of the stove before refueling. * Do not leave the pump side during refueling. * Turn the cap to the right when refueling, and turn the cap to the left when stopping.
Suitable Container Inner Dia. (Φmm) 50 Overall Length (mm) About 550 Hose Length (mm) About 550 Discharge Amount About 6.5L/min Suitable Liquid Kerosene Material Polyethylene
Since it is a one-touch coupler, it can be easily installed.
For taking out from a place away from the air source.
* Do not use other than the specified fluid. * Do not use at pressure above the standard. * Do not use for any other purpose.
Operating Temperature Range (℃) -40~60 Regular Pressure (MPa) 0.78 Maximum Operating Pressure (MPa) 1.47 Air Hose Connection 1/4 one-touch coupler Outer Diameter (Φmm) 10 Inner Diameter (Φmm) 6.5 Suitable Fluid Air Color Orange Material Polyurethane Material (Coupler) Steel (chrome plated)
For piping materials.
* Do not use for any other purpose.
Class 600 Valve Type Ball valve Type Brass Material (Stem) C3604B Material (Body) C3771B Bore Type Full bore Handle Type Lever type Material (Gasket) PTFE Material (Handle) SS400 Type of Connection Screw-in type Suitable Fluid Water, oil, gas
[Multi-purpose resin hose] A pressure-resistant braided hose that can be used with various fluids such as water, oil, chemicals, and air. [Transparency] Good transparency allows you to check the fluid for peace of mind. [Law Compliant] RoHS2 compliant for peace of mind. [Wide range of sizes] Pres... Read More
Operating Temperature Range (℃) -5~60 Laws / Regulations Compliant with RoHS2 amended regulations Material Soft PVC, reinforcement / polyester yarn
Convenient for air collecting piping!
For branching air piping.
* Do not use for fluids other than air. * Do not use at a pressure higher than the working pressure.
Maximum Operating Temperature (℃) -20~80 Maximum Operating Pressure (MPa) 1.5 Suitable Fluid Air Material Iron (chrome plating) + aluminum base Specification One-touch type Type of Connection One-touch type
* Do not use for anything other than its intended purpose.
Operating Temperature Range (℃) -20~70 Maximum Operating Pressure (MPa) 1 Dimension D (Φmm) 26.5 Fluid Air Type of Connection Male screw Socket or Plug Socket Material (Main Unit) Steel (chrome plating)
When used in combination with the dedicated socket (Monotarou Socket Coupler), the automatic opening / closing valve built into the socket opens and closes according to the attachment / detachment of the plug, so there is no need to operate the original valve each time the plug is attached / deta... Read More
Fluid Air Material (Main Unit) Steel (chrome plating)
Has acid resistance suitable for chemicals and foods. You can see the inside well and it is hygienic. An acid-resistant pump that is easy to set in drums.
For liquid chemicals and liquid foods.
The automatic open / close valve built into the socket opens and closes according to the plug attachment / detachment, so there is no need to operate the original valve each time the plug is attached / detached.
Pneumatic tools, various pneumatic pipes, pneumatic equipment, etc.
* Do not use for ... Read More
Operating Temperature Range (℃) -20~70 Dimension D (Φmm) 26.5 Fluid Air Material (Main Unit) Steel (chrome plating)
The most standard one-touch fitting used for general pneumatic piping. We have a wide variety of models and are compatible with all types of pneumatic piping. After installation, you can change the take-out angle of the tube. (Connection port shape / Limited to products that combine screws and on... Read More
Operating Vacuum Pressure (kPa) -100 Operating Temperature Range (℃) 0~60 (no freezing) Maximum Operating Pressure (MPa) 1 Suitable Fluid Air, water (conditions apply) Shape Female straight Type Standard type
Affordable and convenient electric drum pump series! Can be used for subdivision from drums at home. Please choose from AC-100V and DC-12V. You can refuel within 10 minutes for drums and within 1 minute for plastic cans. Easy-to-use refueling gun Nozzle and suction pipe with mesh strainer.
For... Read More
Discharge Hose Length (m) 1.5 Exhaust Port Diameter (mm) 25 Power Cable (m) 4 Fuse Cylindrical fuse (4A) Type Electric Nozzle Gun type Suitable Liquid Kerosene / light oil Thread Size M28 (discharge part)
A small type pressure reducing valve. Keeps the pressure from the compressor stable. With pressure gauge and bracket
Decompresses compressed air and supplies constant pressure throughout the pneumatic line
* Do not use for any other purpose.
Pressure Setting Range (MPa) 0.05~0.85 Maximum Operating Pressure (MPa) 0.96 Pipe Connection Diameter 1/4 Maximum Flow Rate (L/min) 1100 Operating Temperature Range (℃) 5~60 Suitable Fluid Air Set Pressure Unit MPa Type of Thread Rc Pressure Gauge Connection Size Rc1/8 Type of Sign With bracket Pressure Gauge With pressure gauge
Ideal for transporting the fluid pumped by the pump.
If the delivery destination is a private house (detached house / apartment house), the shop name is required. Please note that delivery may not be possible if there is no store name. * Depending on the size, delivery to private homes may not be... Read More
Color Blue RoHS directive (corresponding to 10 substances) Correspondence Material PVC, polyester fiber Suitable Fluid Water
The easiest pump for drums. Low-viscosity oil such as kerosene, light oil, and heavy fuel oil A (oil temperature 10 ° C or higher). (100mPa / S or less) Feather: PPS (polyphenylene sulfide)
For subdivision from drum pump cans
* Cannot be used for gasoline, engine oil, etc.
Included Accessories Discharge hose band Material Feather: PPS (polyphenylene sulfide) Suitable Liquid Kerosene, light oil, A heavy oil, etc. Type Manual drum pump
The damper that adjusts the amount of air flow allows the blades to be opened and closed manually, such as with a handle.
* We do not deliver to private homes (detached houses / apartments). * Depending on the delivery location, the delivery date may be postponed and additional shipping charges m... Read More
It can be easily installed anywhere on the wall or ceiling. It swings 180 degrees so it can be used easily. It is a self-winding airaryl that can be pulled out and used, and pulled out again to be wound up. Comes with a one-touch coupling that is easy to put on and take off.
Ideal for factories a... Read More
Corrosion resistance is good because the fitting is not welded. Has excellent heat resistance, pressure resistance, and earthquake resistance.
Absorption of misalignment and vibration of piping. Ground subsidence / earthquake countermeasures.
Operating Temperature Range -20~140℃ Maximum Operating Pressure 1MPa Connector Screwed
It can be easily installed anywhere on the wall or ceiling. It swings 180 degrees so it can be used easily. It is a self-winding airaryl that can be pulled out and used, and then pulled out again to take up.
Ideal for factories and automobile factories.
* Please note that the hose may melt when u... Read More
・ A water-resistant mirror for bathrooms / washrooms with a moisture-resistant finish on the edge of the mirror end face. ・ The mirror can be replaced using the current mirror fittings.
A moisture-resistant mirror that allows you to replace the mirror that has become difficult to see due to rus... Read More
A PE material pump with acid resistance.
For pumps for transferring liquid chemicals and replenishment work.
*Do not use for highly concentrated chemicals or highly viscous liquids. *When using to transfer chemicals, be sure to wear protective equipment such as gloves and goggles. *Never use in h... Read More
Pumping Rate (L/min) About 21 Hose Length (mm) 1200 Discharge Diameter (Φmm) 22.5 Overall Length (mm) 1150 Intake Pipe Diameter (mm) 25.5 Material PE (polyethylene)
It has excellent conductivity, corrosion resistance, bendability, deep drawing, weldability, and plating properties.
Used for heat exchangers, chemical industry, water / hot water supply, and gas pipes.
Melting Point (℃) 1083 Length (m) 20 Conductivity 70~90%IACS(20℃) Specific Gravity 8.94 Ingredient Copper / 99.9% or more
Lightweight, compact and resistant to clogging, all wetted parts are made of resin and stainless steel. It is rust resistant and has excellent durability. The discharge direction can be easily set either vertically or horizontally. The strainer is also easy to remove, making cleaning and cleaning... Read More
Liquid Temperature Range (℃) 0 to 40 (no freezing) Poles of Motor 2 Minimum Operation Water Level (mm) 85 Remaining Water Level (mm) 45 Length of Foreign Object to Pass (mm) 50 (longest) Diameter of Foreign Object to Pass (Φmm) 8 Electric Motor Dry type underwater motor Connector Flange connection Type Non-automatic (PG type) Material (Spindle) SUS304 Structure (Impeller) Semi-vortex Material (Casing) Synthetic resin Material (Impeller) Synthetic resin
Both the main body material and the threaded part use PP suitable for a clean environment. SUS304 is used for the metal material. It is oil-free. The color of the resin body is clear and the fluid can be confirmed.
* When the fluid used is water or other chemicals, be sure to observe the followin... Read More
In addition to being easy to install on-site even in difficult construction, it is very convenient for storage and storage as it compresses 4m to 1m. Lightweight and nonflammable, it is ideal for general air conditioning ducts. It is extremely easy to carry in and handle at the site. The strength... Read More
Length (m) 4 (1 when compressed) Material Aluminum
A powerful air nozzle that ejects double the amount of air from 16 1.0 mm holes. It is a unique flat design that ejects air more evenly. It is an eco-friendly quiet design.
Drain and dry. Blow away trash. Air cooling. cleaning. Peeling. Air curtain etc.
* Compressor specifications.
Maximum Operating Pressure (MPa) 0.7 Diameter (Φmm) x Number of Holes 1.0×16 Heat Resistance Temperature (℃) 130 Mass (g) 30 Trusco Part No. 393-8671 Nozzle Width (mm) 42 Air Consumption (NL/min) 440 (at 0.3MPa) Nozzle Length (mm) 90 Type Flat Material PPS resin Nozzle Connection R1/4 Thread Size R1/4
Has excellent chemical resistance and corrosion resistance. Since it is made of plastic, it is cheaper than metal fittings.
Can be used in special fields such as food-related and medical-related fields. We contribute widely to air, flood control, electronics, physics and chemistry, painting, wate... Read More
Material (Main Unit) PP Connector Thread Type R Suitable Fluid Water, air Shape half Union
Suitable for transferring various liquids and transferring small pieces from drums. Easy to adjust with a slide cap that is easy to set on a drum
* Cannot be used for gasoline.
As ONE Part Number 1-4021-01 Overall Length (mm) 1185 Hose Length (mm) 1200 Flow Rate (L/min) 17