Chucks
A scroll chuck is a tool that fixes an object by rotating the chuck and opening and closing the claws attached to the chuck. The chuck's claw is an integral type or a split type. Although it is very rarely used in ordinary households, it is used by attaching it to a lathe at the factory site.
Other Related Pages
Kobayashi Tekko 3-jaw scroll chuck (integrated claw type)Number of Jaws 3 claws-
- MonotaRO Raw nail for Kitagawa* Do not use for any purpose other than its intended purpose.Material S50C Dimension E (mm) 5
- Kitagawa Iron Works Chuck grease pro* If you order by cash on delivery, it may be shipped the next day or later.from ₱3,247.81Min. 2 days
- Kitagawa Iron Works Chuck Handle* If you order by cash on delivery, it may be shipped the next day or later.
- KATO Kitagawa Nail (Hydraulic / Pneumatic) HOSince it is necessary to process according to the shape of the material, we use S50C, which is easy to correct and cut. It is also used for general-purpose lathes, NC lathes, machining centers, drilling machines, milling cutters, etc.Material S50C Teeth Spacing 1.5
- IZS Raw nail (for scroll) for sole (empire chuck)Dimension E (mm) 4 Type For scrolling Material S45Cfrom ₱3,165.58Min. 2 days
- KATO Kitagawa raw nail (for scroll chuck) SKSince it is necessary to process according to the shape of the material, we use S50C, which is easy to correct and cut. It is also used for general-purpose lathes, NC lathes, machining centers, drilling machines, milling cutters, etc.Shape S Material S50C Dimension E (mm) 3 Dimension F (mm) 3.5
- KATO Kitagawa T Nut (Jaw Nut)By setting it on the replacement claw in advance, you can replace the claw just by replacing it, and the setup change will be more efficient.Shape T
- Mr. Meister 3-jaw scroll chuckSince the three claws work together, it is easy to center the material and it is used to grasp the material such as a circular prism or a triangular prism. Grasp the material
- ARM SANGYO Iron raw nails for Kitagawa HOWe guarantee high quality because we process 6 faces one by one and then process raw nails. For lathe chuck * The shipping unit is 1 set (3 pieces).Material S-50Cfrom ₱3,247.81Min. 2 days
- ARM SANGYO Iron claw for Kitagawa scroll chuckWe guarantee high quality because we process 6 faces one by one and then process raw nails. For lathe chuck * The shipping unit is 1 set (3 pieces).Material S-50Cfrom ₱3,617.86Min. 2 days
- PROXXON 3-jaw universal chuckHole Diameter (Φmm) 10 Outer Diameter (Φmm) 49 Material Iron Mounting dimensions (mm) Regular nail / Φ25, Reverse nail / Φ50 Suitable Model Wood lace (No.27020)
- ARM SANGYO Iron raw nails for Kitagawa BWe guarantee high quality because we process 6 faces one by one and then process raw nails. For lathe chuck * The shipping unit is 1 set (3 pieces).Material S-50Cfrom ₱3,247.81Min. 3 days
- Kobayashi Tekko 3 Jaws Scroll Chuck (Split Claw Type)Number of Jaws 3 claws
- IZS Kitagawa raw nail (for scroll) SKMaterial S45C Dimension E (mm) 4
- Mr. Meister 3-jaw scroll chuckEquivalent to the three-claw scroll chuck that comes standard with the Precision Mini Lathe Compact 3. Since the claws of this scroll chuck are reversible type, it can be used as a reverse claw or a normal claw by changing the claw replacement position.Chuck Diameter D (Φmm) 50 RoHS directive (corresponding to 10 substances) Correspondencefrom ₱14,797.92Min. 2 days
- Kitagawa Iron Works Hard Jaw* If you order by cash on delivery, it may be shipped the next day or later.
- Kitagawa Iron Works Scroll chuck integrated claw type / straight inlayAdoption of steel body Adoption of epoch-making steel body and cross guide The high rigidity design eliminates body distortion and realizes a dramatic extension of life.Maximum Operating Speed (min -1 [rpm]) 2500 Type One-piece nailfrom ₱49,298.98Min. 3 days
- Kawashimo Chuck mate (raw nail molding holder)Just insert three stop pins into the spot facing holes of the raw nail mounting holes and tighten the chuck (the tension chuck opens), and you're ready to go! Raw nail molding setup is completed within 1 minute. Center runout accuracy is improved within 10 microns and gripping power is also i... Read Morefrom ₱12,330.91Min. 2 days
-
- Kitagawa Iron Works Scroll chuck integrated claw type / straight inlayAdoption of steel body Adoption of epoch-making steel body and cross guide The high rigidity design eliminates body distortion and realizes a dramatic extension of life.from ₱57,522.34Min. 3 days
- IZS High ClawIt is a high claw of the chuck for Kitagawa ironworks. It is processed and used depending on the intended use.Dimension D (mm) 14 Dimension B (mm) 36 Dimension A (mm) 90 Dimension F (mm) 25 Material S45C Dimension E (mm) 6 Dimension G (mm) 45 Teeth Spacing 1.5from ₱4,518.73Min. 4 days
- Kitagawa Iron Works Scroll Chuck Hard JawDimension T6 (mm) 7.94 Maximum static Gripping Force (KN [kgf]) (31[3161]) Dimension T3 (mm) 40 Dimension T1 (mm) 80 Dimension T2 (mm) 28 Maximum Operating Speed (min -1 [rpm]) 3500 Mass (kg) 13.4 Suitable for HBS07C (hard nail) Dimension T9 (mm) 40 Type Split claw Handle Torque (Nm [kgfm]) (107.9[11.0])from ₱19,320.76Min. 2 days
- ARM SANGYO Iron claws for Nippon SteelWe guarantee high quality because we process 6 faces one by one and then process raw nails. For lathe chuck * The shipping unit is 1 set (3 pieces).Material S-50Cfrom ₱3,617.86Min. 3 days
-
- PROXXON 4-jaw chuckFor mounting irregularly shaped materials and eccentric processingRoHS directive (corresponding to 10 substances) Correspondence Material Made of reinforced resin Suitable Model Wood Race DX (No.27020)
- GiGA SELECTION T nut (Jaw nut) for KitagawaHardness HRC38 Material SCM440
-
-
-
-
-
- GiGA SELECTION B-200 / B-200 small diameterCell Spacing (mm) (Serration) 1.5 × 60 ° Material S45Cfrom ₱1,932.08Min. 4 days
- ZTEC Chuck adjustable dummy for small diameterThe diameter of the work dummy can be adjusted as desired! No need to search for a suitable dummy! The molding accuracy of nails has improved dramatically.Thickness (mm) 13 Outer Diameter (Φmm) 30/35/40/45 Set Contents AD30/35/40/45from ₱15,209.09Min. 4 days
- TRUSCO Jaw nutThey tend to utilize a large number of chucks, such as pallet changers and work grippers. At that time, it takes too much time to replace the claws if the jawnuts are shared when changing the setup, so set the jawnuts on the next replacement claw in advance. By doing so, next time, you can replac... Read MoreMaterial S45C
-
-
- ZTEC Chuck Adjustable Dummy Chuck ADThe diameter of the work dummy can be adjusted as desired! No need to search for a suitable dummy! The molding accuracy of nails has improved dramatically.Outer Diameter (Φmm) 50/60/70/80/90 Thickness (mm) 13 Set Contents AD50/60/70/80/90from ₱12,330.91Min. 4 days
-
Filter by categories
