All Category

End Mills

An end mill is a cutting tool used to smoothly cut the surface of parts such as metal and plastic. There are many types of end mills, and they are classified into many types according to the number of cutting edges and the cutting length. Although there are differences depending on the cutting method, a two-blade end mill is used for general cutting operations. A multi-blade end mill is suitable for cutting narrow parts such as side cuts. The appropriate blade length will vary depending on the depth of cut. Use caution when using a blade length that is too long, as vibration will occur and it will not be cut well.
View : Grid List
Filter

Items 1 - 40 of 4509

Set Ascending Direction
  1. High-speed Steel Square End Mill Short 4-BLade Center Cut
    MonotaRO High-speed Steel Square End Mill Short 4-BLade Center Cut
    A high-speed end mill suitable for side machining and finishing. Carbon steel, alloy steel, cast iron, aluminum alloy * Do not use for anything other than its intended purpose.
    Number of Tips 
    Rating:
    90%
    from ₱492.99
    Min. 2 days
  2. Carbide Square End Mill TiAlN Coated 2-Flute 2.5D Gash
    MonotaRO Carbide Square End Mill TiAlN Coated 2-Flute 2.5D Gash
    TiAlN coating is a coating with excellent heat resistance and is suitable for medium and high speed cutting of alloy steel, austenitic steel, etc., and for machining castings and non-ferrous metals. Because it is a gash type, it has high cutting edge strength and excellent chipping resistance. * ... Read More
    Material  Cemented carbide  Number of Tips  Type  Cutting edge gash pad  Cutting Edge Shape  Cutting edge gash pad  Helix Angle (°)  30  Maximum Drilling Capacity  2.5D 
    Rating:
    92%
    from ₱492.99
    Min. 2 days
  3. Square High-Speed Steel End Mill, Short, 2-Flute
    MonotaRO Square High-Speed Steel End Mill, Short, 2-Flute
    Suitable for processing carbon steel, alloy steel, pre-hardened steel (HRC30-40), aluminum, etc. * Do not use for anything other than its intended purpose.
    Number of Tips  Helix Angle (°)  30 
    Rating:
    92%
    from ₱534.11
    Min. 2 days
  4. Carbide Square End Mill TiAlN Coated 4-flute 2.5D Gash
    MonotaRO Carbide Square End Mill TiAlN Coated 4-flute 2.5D Gash
    TiAlN coating is a coating with excellent heat resistance and is suitable for medium and high speed cutting of alloy steel, austenitic steel, etc., and for machining castings and non-ferrous metals. Because it is a gash type, it has high cutting edge strength and excellent chipping resistance. * ... Read More
    Material  Cemented carbide  Number of Tips  Type  Cutting edge gash pad  Surface Treatment  TiAIN  Helix Angle (°)  30  Maximum Drilling Capacity  2.5D 
    Rating:
    89%
    from ₱698.57
    Min. 2 days
  5. Carbide square end mill, TiAlN coated, 2-flute 2.5D pin cad
    MonotaRO Carbide square end mill, TiAlN coated, 2-flute 2.5D pin cad
    TiAlN coating is a coating with excellent heat resistance and is suitable for medium and high speed cutting of alloy steel, austenitic steel, etc., and for machining castings and non-ferrous metals. The cutting edge is sharp and the processing accuracy is good, making it suitable for precision fi... Read More
    Material  Cemented carbide  Number of Tips  Type  Tip pin type  Surface Treatment  TiAlN  Cutting Edge Shape  Tip pin type  Helix Angle (°)  30  Maximum Drilling Capacity  2.5D 
    Rating:
    86%
    from ₱451.87
    Min. 2 days
  6. High-speed square end mill, long, 4-flute, center cut
    MonotaRO High-speed square end mill, long, 4-flute, center cut
    Suitable for processing carbon steel, alloy steel, pre-hardened steel (HRC30-40), aluminum, etc. * Do not use for anything other than its intended purpose.
    Number of Tips  Helix Angle (°)  30 
    Rating:
    99%
    from ₱698.57
    Min. 2 days
  7. High-speed ball end mill, 2-flute
    MonotaRO High-speed ball end mill, 2-flute
    * Do not use for anything other than its intended purpose.
    Number of Tips  Helix Angle (°)  30 
    Rating:
    89%
    from ₱739.69
    Min. 2 days
  8. Carbide Square End Mill TiAlN Coated 2-Flute 2D Gash
    MonotaRO Carbide Square End Mill TiAlN Coated 2-Flute 2D Gash
    The TiAlN coating has excellent heat resistance and is suitable for medium- and high-speed cutting of alloy steel and austenitic steel, as well as machining of castings and non-ferrous metals. Because it is a gash type, it has high cutting edge strength and excellent chipping resistance. * Do not... Read More
    Material  Cemented carbide  Number of Tips  Type  Cutting edge gash pad  Surface Treatment  TiAlN  Helix Angle (°)  30  Maximum Drilling Capacity  2D 
    Rating:
    83%
    from ₱402.53
    Min. 2 days
  9. 4 Blade Long Blade End Mill
    SANKO MFG 4 Blade Long Blade End Mill
    * For separately shipped products, if you order by cash on delivery, it will be shipped the next day or later.
    Number of Tips  Helix Angle (°)  30 
    Rating:
    93%
    from ₱1,520.91
    Min. 2 days
  10. SG-FAX Roughing end mill Fine pitch short
    NACHI (NACHI-FUJIKOSHI) SG-FAX Roughing end mill Fine pitch short
    SG coating is applied to powdered highs to enable high-efficiency machining like carbide. Lifespan is more than 3 times that of conventional products. Supports from mold steel to difficult-to-cut materials. Carbon steel, alloy steel, pre-hardened steel, die steel, heat resistant alloy, cast iron,... Read More
    Surface Treatment  SG (TiCN) coating  Helix Angle  Standard 
    from ₱4,107.56
    Min. 5 days
  11. 4-flute regular blade end mill
    SANKO MFG 4-flute regular blade end mill
    * For separately shipped products, if you order by cash on delivery, it will be shipped the next day or later.
    Material  Cobalt high speed (HS-Co)  Number of Tips 
    from ₱1,233.09
    Min. 5 days
  12. 2-Flute Ball End Mill Regular Blade
    SANKO MFG 2-Flute Ball End Mill Regular Blade
    Material  High cobalt high speed (SKH57)  Number of Tips 
    from ₱2,343.24
    Min. 110 days
  13. 2-flute ball end mill short blade
    SANKO MFG 2-flute ball end mill short blade
    * For separately shipped products, if you order by cash on delivery, it will be shipped the next day or later.
    Material  Cobalt high speed HS-Co  Number of Tips  Shank Diameter (Φmm)  Helix Angle (°)  30 
    from ₱2,055.43
    Min. 5 days
  14. Carbide Square End Mill, 2-Flute For Aluminum Processing
    Zhuzhou Tools Carbide Square End Mill, 2-Flute For Aluminum Processing
    Side processing, shoulder cutting, grooving
    Material  Carbide  Number of Tips  Surface Treatment  Non-coated  Helix Angle (°)  55  Applicable Workpiece Materials  Aluminum: ◎ 
    from ₱534.11
    Min. 6 days
  15. Carbide / C coated 2-flute end mill (long blade length)
    MOLDINO (Former Hitachi Tool) Carbide / C coated 2-flute end mill (long blade length)
    Specification  Medium finishing and finishing  Material  Carbide (CARBIDE)  Number of Tips  Surface Treatment  C coat  Helix Angle (°)  30 
    from ₱4,929.90
    Min. 3 days
  16. Estec Muscle 3-Flute End Mill Regular Blade
    SANKO MFG Estec Muscle 3-Flute End Mill Regular Blade
    Uses high-grade powder highs. The original blade mold enables from heavy cutting to finishing.
    Material  High-class powder HSS (STEC)  Number of Tips  Helix Angle (°)  50 
    from ₱1,932.08
    Min. 5 days
  17. Super hard long end mill 4-flute
    NACHI (NACHI-FUJIKOSHI) Super hard long end mill 4-flute
    A general-purpose end mill that can process copper, stainless steel, and aluminum. Suitable for wide side surface and deep side surface processing.
    Number of Tips  Helix Angle  Standard 
    from ₱2,014.31
    Min. 5 days
  18. 4.0x 60mm end mill (TiN coat, Co-HSS / 4 blades)
    ESCO 4.0x 60mm end mill (TiN coat, Co-HSS / 4 blades)
    Material  Cobalt heiss  Number of Tips  Shank Diameter (Φmm)  Blade Diameter (Φmm)  Surface Treatment  TiN coat 
    from ₱2,261.01
    Min. 3 days
  19. Radiuscutter
    Mitsubishi Materials Radiuscutter
    Radius cutter for high feed. Stable cutting is possible with a strong tip clamp. Coolant holes are standard equipment on both urban and shank types.
    from ₱14,797.92
    Min. 3 days
  20. N coating REα nick end mill 3D type
    SANKO MFG N coating REα nick end mill 3D type
    Adopting a new surface treatment "N coating", it achieves a long life of 1.8 times or more compared to general products. Four types of blade lengths are available to suit your needs.
    Material  Cobalt high speed (HS-Co)  Surface Treatment  N coating  Helix Angle (°)  30 
    from ₱3,617.86
    Min. 5 days
  21. 3S end mill 6 blades special long blade 6XLF
    Fukuda Seiko (FKD) 3S end mill 6 blades special long blade 6XLF
    Material  HSS-Co(SKH56)  Number of Tips  Shank Diameter (Φmm)  42 
    from ₱78,080.71
    Min. 5 days
  22. Top cut series Composite multilayer coating AlTin
    EMUGE Top cut series Composite multilayer coating AlTin
    Universal end mill boasting ease of use and high cutting performance We do not choose opponents (workpieces) from steel, carbon steel, stainless steel, cast iron to difficult-to-cut materials such as titanium alloys and heat-resistant alloys, and high-hardness steel up to HRC55. Suppresses chatte... Read More
    Material  Carbide  Number of Tips  Surface Treatment  TiAlN 
    from ₱3,576.75
    Min. 5 days
  23. D Solid end mill COAT
    ISCAR D Solid end mill COAT
    Carbide ball end mill Medium to finish processing in milling processing ※The image is an image.
    from ₱4,518.73
    Min. 2 days
  24. Throwaway end mill
    Mitsubishi Materials Throwaway end mill
    * If you order by cash on delivery, it may be shipped the next day or later.
    from ₱16,031.42
    Min. 5 days
  25. DLC coated carbide end mill
    SANKO MFG DLC coated carbide end mill
    Material  Ultra fine grain cemented carbide (MGC)  Number of Tips  Shank Diameter (Φmm)  Blade Diameter (Φmm)  1.5  Surface Treatment  DL (DLC) coating 
    from ₱2,425.48
    Min. 5 days
  26. Carbide Square End Mill TiAlN Coated 4-Flute Gash Strong Twist
    MonotaRO Carbide Square End Mill TiAlN Coated 4-Flute Gash Strong Twist
    By adjusting the twist of the blade to 45 °, it is possible to cut high hardness materials and high feed machining, and the rigidity is also increased. In addition, it can be machined for a long time and the cut surface is finished cleanly. * Do not use for anything other than its intended purpose.
    Material  Cemented carbide  Number of Tips  Surface Treatment  TiAlN  Cutting Edge Shape  Gouache guess  Helix Angle (°)  45 
    Rating:
    83%
    from ₱986.39
    Min. 2 days
  27. Carbide Long Neck Square End Mill TiAlN Coat 2 Flute
    MonotaRO Carbide Long Neck Square End Mill TiAlN Coat 2 Flute
    Tool interference during deep engraving can be avoided. * Please use protective goggles when working as there is a risk of damage. * Do not touch the cutting edge with your bare hands. * Be careful not to get injured by scattering chips or wrapping.
    Material  Carbide  Number of Tips  Surface Treatment  TiAlN  Shank Diameter Tolerance  h6  Helix Angle (°)  30  Neck angle (°)  15 
    Rating:
    82%
    from ₱575.22
    Min. 2 days
  28. Carbide Square End Mill TiAlN Coated 4-Flute 2.5D Pincad
    MonotaRO Carbide Square End Mill TiAlN Coated 4-Flute 2.5D Pincad
    TiAlN coating is a coating with excellent heat resistance and is suitable for medium and high speed cutting of alloy steel, austenitic steel, etc., and for machining castings and non-ferrous metals. The cutting edge is sharp and the processing accuracy is good, making it suitable for precision fi... Read More
    Material  Cemented carbide  Number of Tips  Type  Tip pin type  Surface Treatment  TiAIN  Helix Angle (°)  30  Maximum Drilling Capacity  2.5D 
    Rating:
    92%
    from ₱698.57
    Min. 2 days
  29. Carbide Ball End Mill TiAlN Coat 2 Flute
    MonotaRO Carbide Ball End Mill TiAlN Coat 2 Flute
    * Do not use for anything other than its intended purpose.
    Number of Tips  Surface Treatment  TiAIN  Coating  TiAlN  Helix Angle (°)  30 
    Rating:
    69%
    from ₱657.46
    Min. 2 days
  30. BSK end mill case
    MAKINO BSK end mill case
    With an adjuster mechanism, it can be adjusted according to the length of the stored items. Because it is transparent, you can see the inside well. The durable case protects the stored items. As a tool case for drills, etc., for managing small items
    Specification  Body, lid set  Number of Storage (pieces) 
    Rating:
    88%
    from ₱69.49
    Min. 2 days
  31. High sluffing end mill, short, 4-flute
    MonotaRO High sluffing end mill, short, 4-flute
    * Do not use for anything other than its intended purpose.
    Number of Tips  Helix Angle (°)  30 
    Rating:
    96%
    from ₱1,027.51
    Min. 2 days
  32. Carbide Square End Mill TiAlN Coated 2-Flute 2D Pincad
    MonotaRO Carbide Square End Mill TiAlN Coated 2-Flute 2D Pincad
    TiAlN coating is a coating with excellent heat resistance and is suitable for medium and high speed cutting of alloy steel, austenitic steel, etc., and for machining castings and non-ferrous metals. The cutting edge is sharp and the processing accuracy is good, making it suitable for precision fi... Read More
    Material  Cemented carbide  Number of Tips  Type  Tip pin type  Surface Treatment  TiAlN  Helix Angle (°)  30  Maximum Drilling Capacity  2D 
    Rating:
    100%
    from ₱402.53
    Min. 2 days
  33. Carbide End Mill for Resin
    MonotaRO Carbide End Mill for Resin
    By manufacturing with an end mill using a fine-grained whetstone, the surface accuracy of the resin machined surface can be finely finished, and it can also be used for aluminum processing. Processing of resin, aluminum, etc. * Do not use for anything other than its intended purpose.
    Material  Cemented carbide  Number of Tips  Tip Shape  Pinkado  Helix Angle (°)  30 
    Rating:
    86%
    from ₱986.39
    Min. 2 days
  34. BSK end mill drill case
    MAKINO BSK end mill drill case
    With an adjuster mechanism, it can be adjusted according to the length of the stored items. Because it is transparent, you can see the inside well. The durable case protects the stored items. As a tool case for end mills and drills. For managing small items.
    Specification  Body, lid set  Material  Polypropylene (PP)  Number of Storage (pieces) 
    Rating:
    93%
    from ₱98.27
    Min. 2 days
  35. Carbide long neck ball end mill, AlCrN coated, 2-flute
    MonotaRO Carbide long neck ball end mill, AlCrN coated, 2-flute
    Made by a safe domestic manufacturer. Abrasion resistance is improved by using AlCrN coating. Since it is a deep rib type, tool interference during deep engraving can be avoided. For deep carving. * Be sure to wear protective equipment when using as there is a risk of injury. * Do not use for any... Read More
    Material  Carbide  Number of Tips  2 blades  Surface Treatment  AlCrN coating  Helix Angle  30θ 
    Rating:
    91%
    from ₱657.46
    Min. 2 days
  36. Carbide Square End Mill TiAlN Coated 2-Flute 3D Gash
    MonotaRO Carbide Square End Mill TiAlN Coated 2-Flute 3D Gash
    TiAlN coating is a coating with excellent heat resistance and is suitable for medium and high speed cutting of alloy steel, austenitic steel, etc., and for machining castings and non-ferrous metals. Because it is a gash type, it has high cutting edge strength and excellent chipping resistance. * ... Read More
    Material  Cemented carbide  Number of Tips  Type  Cutting edge gash pad  Surface Treatment  TiAlN  Helix Angle (°)  30  Maximum Drilling Capacity  3D 
    Rating:
    92%
    from ₱492.99
    Min. 2 days
  37. Carbide Square End Mill TiAlN Coated 2-Flute 3D Pincad
    MonotaRO Carbide Square End Mill TiAlN Coated 2-Flute 3D Pincad
    TiAlN coating is a coating with excellent heat resistance and is suitable for medium and high speed cutting of alloy steel, austenitic steel, etc., and for machining castings and non-ferrous metals. The cutting edge is sharp and the processing accuracy is good, making it suitable for precision fi... Read More
    Material  Cemented carbide  Number of Tips  Type  Tip pin type  Surface Treatment  TiAlN  Helix Angle (°)  30  Maximum Drilling Capacity  3D 
    Rating:
    80%
    from ₱492.99
    Min. 2 days
  38. Micro Carbide End Mills
    TCT Japan Micro Carbide End Mills
    Carbide 2-flute square end mill with excellent wear resistance. A sharp edge design has been achieved with a unique cutting edge design. Suitable for processing a wide variety of work materials such as non-ferrous metals, plastics, resins, carbon fibers, wood, paper, concrete and glass.
    Shank Diameter (Φmm)  3.175  RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    98%
    from ₱575.22
    Min. 2 days
  39. High-speed end mill for aluminum, short, 2-flute
    MonotaRO High-speed end mill for aluminum, short, 2-flute
    * Do not use for anything other than its intended purpose.
    Number of Tips  Helix Angle (°)  42 
    Rating:
    83%
    from ₱657.46
    Min. 2 days
  40. 2-Flute MSTAR End Mill (M)
    Mitsubishi Materials 2-Flute MSTAR End Mill (M)
    A unique coating that applies miracle coating technology. General-purpose 2-flute square end mill General purpose * If you order by cash on delivery, it may be shipped the next day or later.
    Material  Ultra fine particle carbide  Shape  Square  Number of Tips  Surface Treatment  MS coating  Cutting Edge Shape  Pinkado  Helix Angle (°)  30 
    Rating:
    94%
    from ₱1,027.51
    Min. 2 days
View : Grid List
Filter

Items 1 - 40 of 4509

Set Ascending Direction