Gloves with excellent cut resistance using high-strength polyethylene thread. It has excellent oil resistance and wear resistance. The palms are coated with nitrile to prevent slipping. These gloves are reusable and economical as they are also washable. It is 13 gauge and has a fine weave, which ... Read More
Touch panel compatible gloves with cut resistance, low dust generation, and breathability.
For automobile-related, glass-related, equipment maintenance, waste disposal, etc.
* High-strength polyethylene is generally superior in light resistance, chemical resistance, and water resistance to aramid... Read More
Specification Non-slip: Yes Color Black Grey Function Touch panel compatible Cut Resistance X/B Anti-slip effect Yes
Maxi Cut Ultra has introduced Cut Tech.
Precision work with a high risk of cut accidents in a dry environment. (Handling of sheet metal / broken glass, assembly work, maintenance, etc.)
* EN388 cut level is based on measurement data and is not a guaranteed value. Cut-resistant gloves are not glov... Read More
Color blue-black Standard EN388 2016 standard: 4542C Material (Slip Prevention) Nitrile rubber Cut Resistance 5/C Anti-slip effect Yes
The black foamed nitrile coating improves grip and abrasion resistance, providing excellent grip even in oil film conditions. Outer fabric The back of the hand protects with Level 4 cut resistance, providing top-level flexibility and comfort. It is composed of a blend of high-performance polyethy... Read More
Specification (ISEA CUT)5 Color Gray / black Mass (g) 115 Quantity per Package (Pair) 1 Cut Resistance Level 5 (EN388)
It is a product that uses metal fiber and high-strength polyethylene fiber and has acquired high safety of cut resistance level E in European standard EN388: 2016. Nitrile rubber, which has excellent oil resistance and abrasion resistance, is used for the palm coating, and since it is compatible ... Read More
Material Coating: Nitrile rubber Color Light blue Standard 4×43E(EN388:2016) Quantity per Package (Pair) 1 Heat Resistance EN407: 2004 / Contact heat level 1 Cut Resistance EN388: 2016 / Level E, ANSI / A5 Level
High-strength polyethylene is used and nitrile rubber is coated on the palm to achieve both fit and workability.
Sheet handling, machining, assembly work, etc.
Color Yellow green / black Material (Slip Prevention) Nitrile rubber
1.18G braid for high workability 2.Palm coated with nitrile for high grip. 3. Black color makes dirt less noticeable 4. Cut resistance level "D" (EN 388:2016)
Color Black Quantity per Package (Pair) 1 Function Cut resistant wound Cut Resistance D
It is a product that uses high-strength polyethylene fiber (Tsunooga) and has acquired high safety of cut resistance level E in European standard EN388: 2016. Since it is an all-coat type with a coating on the entire surface, the coated part prevents liquid and oil from seeping in. Nitrile rubber... Read More
Material Coating: Nitrile rubber Color Light pink Standard 4×43E(EN388:2016) Quantity per Package (Pair) 1 Function Cut resistant, oil resistant Cut Resistance EN388: 2016 / Level E, ANSI / A4 Level
This product uses high-strength polyethylene fiber (Tsunooga) and has acquired cut resistance level D in European standard EN388: 2016. Since it is a back coat type with a coating up to the back of the hand, the coated part prevents liquid and oil from seeping in. Nitrile rubber, which has excell... Read More
Material Coating: Nitrile rubber Color Light pink Standard 4×43D(EN388:2016) Quantity per Package (Pair) 1 Function Cut resistant, oil resistant Cut Resistance EN388: 2016 / Level D, ANSI / A4 Level
Work gloves with high cut resistance that have achieved level D in EN388:2016 despite being ultra-thin 18-gauge, thanks to proprietary fibers. It is touch panel compatible, so you can operate your smartphone or tablet while wearing it. Made of elastic spandex, it has an excellent fit and workabil... Read More
Color Green Standard 4X32D(EN388:2016) Quantity per Package (Pair) 1 Coating Nitrile rubber Cut Resistance EN388: 2016 / Level D, ANSI / A4 Level
Cut-resistant gloves that combine Toyobo's Tsunuga and spandex (stretchable polyurethane). High-strength polyethylene fiber is a super fiber that shows more than twice the cut resistance of polyethylene fiber and nylon fiber, and also exhibits excellent durability against light and water. By ... Read More
Color Heather gray Standard EN388: 2016 standard Function Cut resistant wound Cut Resistance B
Cut resistant gloves, EN388 cut resistant level E, 18 gauge thin and excellent workability.
It can be used for a wide range of applications such as all sites where there is a risk of cuts and other general work.
Safety gloves with excellent cut resistance, heat resistance, abrasion resistance, oil resistance, and tear strength. EN388: 2016 standard Cut resistance is the highest level F level. A cut-resistant liner that combines 13-gauge HPPE (high-performance polyethylene) yarn and steel yarn is coated w... Read More
Color Black / orange Standard EN388：2016 Quantity per Package (Pair) 1 Material (Slip Prevention) Nitrile coat Abrasion resistance 4 Cut Resistance F Puncture resistance 3 Tear resistance 4
- Cut-resistant gloves that use high-strength polyethylene fiber "Tsunooga(TM)" and achieve high level D cut resistance and flexibility according to EN388:2016. It has excellent workability and breathability. - Nitrile rubber has a special non-slip coating, and it exhibits high grip eve... Read More
Material Coating: Nitrile rubber Color Light green Standard 4×42D(EN388:2016) Quantity per Package (Pair) 1 Function Cut resistance, flexibility Cut Resistance EN388: 2016 / Level D, ANSI / A4 Level
A long type of cut-resistant gloves that can cover up to the elbow, reducing the risk of arm cut accidents. High-strength polyethylene fiber "Tsunooga" is used to achieve high level D cut resistance and flexibility at EN388: 2016. It has excellent workability and breathability. For codi... Read More
Color Green Standard EN388 2016 Standard: 4X42D Quantity per Package (Pair) 1 Material (Slip Prevention) Nitrile rubber Cut Resistance X/D EN388 D
The cut resistance is improved by using glass fiber.
For automobile-related, glass-related, equipment maintenance, waste disposal, etc.
* High-strength polyethylene is generally superior in light resistance, chemical resistance, and water resistance to aramid fiber, but inferior in heat resistanc... Read More
Specification Non-slip: Yes Color Black Grey Material (Slip Prevention) Nitrile rubber Cut Resistance 5 Anti-slip effect Yes
MonotaRO Cut-Resistant Gloves with Non-Slip Nitrile CoatingGloves with excellent cut resistance using high-strength polyethylene thread. It has excellent oil resistance and wear resistance. The palms are coated with nitrile to prevent slipping. These gloves are reusable and economical as they are also washable. It is 13 gauge and has a fine weave, which ... Read MoreQuantity per Package (Pair) 1
