Reflects sunlight with aluminum coating × Cooling agent for helmets. Soak the main body in water, squeeze it lightly, and attach it to the back band of the helmet. The synergistic effect of the helmet-specific ice pack and the heat of vaporization suppresses the rise in body temperature. Installa... Read More
Water absorption is 5 times that of cotton, and durability is 1.3 times that of cotton. It has good breathability and dries easily, so it is difficult for bacteria to grow.
Material Polyester, nylon Intended Use Sweat absorption
An undercap with excellent sweat absorption and wicking properties that is worn under the protective cap. With a size adjustment function, it fits perfectly. Uses a sweat-absorbing and quick-drying material, Aqua Dry.
* Helmet is sold separately.
Other Helmet is not included Type Under cap Mass (g) 27 Intended Use Sweat absorption
The surface of the shade is coated, making it resistant to water. There is a trivet inside the shade, and it floats a little from the head, so it is well ventilated and hard to get stuffy.
For awning
Put it on the inside of a hat or helmet to prevent sweat from getting into your eyes. It has a fast water absorption rate and excellent water retention.
Intended Use Sweat absorption As ONE Part Number 1-9145-01
Can be washed completely. It can be easily attached to the inner part of the helmet using Velcro. With a deodorant function, it is comfortable to wear. Easy to install.
Helmet-wearing workers, sites where heat measures (sweat) are forced.
Color Light blue Mass (g) 11 Intended Use Sweat absorption
Effectively cools the back of the head. Can be easily attached to a helmet. Recommended for heat stroke prevention.
Attached to a helmet to prevent heat stroke.
Included Accessories Coolant x 2 Color Gray Mass (g) 133
Wide size absorbs a large amount of sweat from the forehead. Excellent water retention with polymer absorbent. Disposable type with tape that can be easily attached and hygienic.
Easy installation just by fitting it into the helmet. A triangular mark is displayed as a alignment mark when fitting it into the helmet. A large hisashi blocks sunlight and prevents glare. Hisashi is a mesh material, so it has excellent breathability.
* It may not be possible to install dependin... Read More
Color Blue Mass (g) About 65 Inner Diameter (Φmm) (Approximately) 200 × 160 Outer Diameter (Φmm) (Approx) 400 x 380 Intended Use Measures against heat RoHS directive (corresponding to 10 substances) Correspondence
Attach it as it is to prevent sunlight! Cool down the neck with a special fabric! Also for heat stroke measures! Absorbs sweat and relieves unpleasant stickiness! Sweat-absorbent, quick-drying, antibacterial and deodorant processing.
Helmet awning
Material Polyester Color Black Intended Use Sunshade RoHS directive (corresponding to 10 substances) Correspondence
Material Vinyl chloride Color Yellow Diameter (Φmm) About 390 Mass (g) About 80 Intended Use Measures against heat RoHS directive (corresponding to 10 substances) Correspondence
Uses the world's first cool feeling fabric "SHAKE & COOL". Simply squeeze and shake to absorb water and the dough temperature will drop. UV blocking rate (UV cut) 98%. UV Protective Index (UPF) 50+. Antibacterial specifications. Machine washable. No polymers, synthetic resins or... Read More
Material 100% polyester Size Free Intended Use Measures against heat
We use high quality silica gel, which is a natural material, and silica gel (R) manufactured by a special manufacturing method. It has a quick effect on deodorizing and absorbing moisture, and quickly removes odors and stuffiness on the forehead. Using Unitika "Uchimizu Dot Mesh", a coo... Read More
Material Polyester, silica gel Color Blue RoHS directive (corresponding to 10 substances) Correspondence
The aluminum cover shields the strong sunlight. Since the eaves are made of bamboo, the sunshade effect is outstanding. It can be easily attached to a helmet. It is hard to get wet even if it rains. Comes with a non-slip rubber sheet and a clip. When not in use, it is easy to remove the "TAK... Read More
Material Cover: Aluminum, eaves: Bamboo Intended Use Measures against heat RoHS directive (corresponding to 10 substances) Correspondence
When the cooling effect fades, you can shake it again to get the cooling effect again and again! The single-layer, triple-structured fabric that controls moisture such as water absorption, water retention, and evaporation effectively generates heat of vaporization. By shaking for 3 to 5 seconds, ... Read More
Material 100% polyester Size Free size Intended Use Measures against heat
We use high quality silica gel, which is a natural material, and silica gel (R) manufactured by a special manufacturing method. It has a quick effect on deodorization and moisture absorption, and quickly removes odors and stuffiness in the helmet. Honeycomb mesh absorbs the impact on the head. It... Read More
Material Polyester, silica gel Color Black RoHS directive (corresponding to 10 substances) Correspondence
Comfortable work, safety first, zero disaster march with sweat pad. Work efficiency is improved. Cuts sweat from the forehead. Easy to install. A refreshing fit. Can be washed repeatedly.
Material Sweat pad / cotton As ONE Part Number 63-2890-49
Just pass it through the chin strap of the helmet. An antibacterial and deodorant towel cloth sweat-removing pad. A set of 2 deals. Two colors to choose from. Gray is the string of the work helmet. Black is ideal for bicycle and motorcycle laces.
For sweat prevention and dirt prevention of the ch... Read More
Material Cotton RoHS directive (corresponding to 10 substances) Correspondence
Easy cooling just by wetting the water retention part of the back of the head with water! Built-in high water retention fiber. Cool down with the heat of vaporization effect. Comfortable because the top of the head is mesh. It is hygienic with antibacterial deodorant effect.
The heat insulation effect is improved and the neck is protected from strong ultraviolet rays and sunlight !! Attached to any helmet !! It is hard to slip due to the use of a non-slip band. Can be used repeatedly after washing with water. Silicone rubber is used on the back side of the elastic pa... Read More
Material 100% polyester Intended Use Measures against heat
We use high quality silica gel, which is a natural material, and silica gel (R) manufactured by a special manufacturing method. It has a quick effect on deodorization and moisture absorption, and quickly removes odors and stuffiness in the helmet. Using Unitika "Uchimizu" dot mesh, whic... Read More
Color Table: dark blue, back: black Intended Use Measures against heat RoHS directive (corresponding to 10 substances) Correspondence
A magical inner that revives the feeling of coldness as many times as you like in 3 steps: wetting, squeezing, and shaking! Equipped with the world's first functional cold feeling fabric "COOL CORE" that controls moisture such as water supply, water retention, and evaporation! The h... Read More
Water absorption is 5 times that of cotton, and durability is 1.3 times that of cotton. It has good breathability and dries easily, so it is difficult for bacteria to grow.
Material Polyester, nylon Intended Use Measures against heat
Uses towel cloth from Imabari, Shikoku. Use it with an ice pack in your pocket. Please use the cold insulation material after cooling it in the freezer for at least 3 hours. (Cooling effect about 60 minutes) It can be used without an ice pack.
Uses the world's first cool feeling fabric "SHAKE & COOL". Simply squeeze and shake to absorb water and the dough temperature will drop. UV blocking rate (UV cut) 98%. UV Protective Index (UPF) 50+. Antibacterial specifications. Machine washable. No polymers, synthetic resins or... Read More
Material 100% polyester Size Free Intended Use Measures against heat
Cool with the heat of vaporization effect, shutting out direct sunlight! It is an eco-friendly material that is kind to the body. Contains PVA sponge with excellent water retention The cooling effect lasts for a long time! Breathability is improved with a mesh cover! When you remove the flap, it ... Read More
Material Fabric: PolyesterInside: PVA sponge Color Black Size Free Mass (g) 56 Intended Use Measures against heat
[Neck cover] We use high quality silica gel, which is a natural material, and silica gel manufactured by a special manufacturing method. It has an immediate effect on deodorant and moisture absorption, and quickly removes odors and stuffiness on the back of the head. It is comfortable even in hot... Read More
Material Fabric: Polyester, Contents: Silica gel Intended Use Measures against heat RoHS directive (corresponding to 10 substances) Correspondence
Soak it in water for about 1 minute, squeeze it lightly, and put it under the helmet to cool it down.
For workers wearing helmets in the hot weather workplace. (Can also be attached to cap type helmets)
Material Polyester, super absorbent fiber Color Navy Mass (g) 40
With a soft touch that effectively prevents sweat dripping! When exposed to light, the photocatalytic effect restores the antibacterial and deodorant effect. Chin and strap mounting type. Shikoku Imabari towel cloth antibacterial deodorant
Eliminates stuffiness and odor of helmets. It stretches without tightening with our unique cutting technology, so it fits perfectly on your head! Uses high water absorption fiber, wets the water retention pad on the back of the head with water, and prevents the body temperature from rising due to... Read More
Cuts the sweat that flows down from the forehead and prevents sweat from getting into the eyes! Uses antibacterial, deodorant, and cool contact materials! Detachable with Velcro and washable!
TOYO SAFETY TAKE visorMaterial bamboo Mass (g) About 78 Intended Use Measures against heat RoHS directive (corresponding to 10 substances) Correspondence
