Garage Equipment & Installation
Garage equipment / maintenance equipment includes all garage equipment and maintenance equipment related to cars and trucks. Various jacks that can be selected according to the height of the vehicle are useful items for changing tires and oil. There are many other items such as attachments, car slopes and jack oil. Various garage facilities and equipment such as hydraulic presses, engine cranes and transmission jacks are available. In addition, we have a lot of parking-related products, safety and work supplies, machine tools and equipment, and sales promotions for stores.
Other Related Pages
- MonotaRO Jack stand 3tA must-have for jacking up. With double lock pin. Height can be adjusted in 9 steps. It can be adjusted in 9 steps of about 280, 298, 315, 333, 350, 368, 385, 403, 420 mm. (Height to the recessed part of the saucer) Stable with a base. During jack-up work * At the time of purchase, the saucer com... Read MoreMain Unit Dimensions (Width x Depth x Height) (mm) 200 x 187 x 293-433 (highest saucer) Lowest Position (mm) 280 (floor surface to saucer dent) Load Capacity (ton) 3 Highest Position (mm) 420 (floor surface-dent of saucer) Mass (kg) 6.4 (1 set)
- MonotaRO Car Slope Low TypeIdeal for undercarriage maintenance for cars that are low down and cannot be jacked. The slope slope is about 7 degrees. To increase the height of low-down vehicles * Do not use for any other purpose. * Please do not use the product in a vehicle that exceeds the load capacity. * After riding on t... Read MoreHeight (mm) (Vehicle ride-on part) 68 Allowable Load (kg) 1500 (1 set) Mass (kg) 3.1 (1 set) Main Unit Dimensions, Width W x Depth D x Height H (mm) 700×201×80 Material PP Applicable Tire Width (mm) Within 190
- MonotaRO Jack attachment for sideAn attachment that protects the jack point. Suitable for jacking up from the side. For jacking up from the side * When jacking up the car body from the side, please use it according to the jack point. If the jack points do not fit, do not use.Mass (g) 300 Dimensions, Diameter x Height H (Φmm x mm) 51×39 Suitable for Order code: 70335274, 75090444 Material PU (polyurethane resin)
- MonotaRO Car stopperPrevent contact accidents by stopping the car in the parking lot or garage. Made of rubber and has excellent durability. For car stops in general parking lots and commercial facilities * Do not use for any other purpose. * At the time of construction, it is recommended to have a drill hole diamet... Read MoreMass (kg) 4.5 Dimension (mm) 550×150×100 Color Black Material Rubber
- MonotaRO Car slope split typeIt is a convenient product to easily raise the car by raising the front wheels when changing oil. It can be used as an aid when jacking up a car and is also ideal for low-down cars. Since the main body can be divided into two, it is convenient to carry and store. For front wheels * For safety whe... Read MoreLength (mm) (Slope) 600 Mass (kg) 10.2 (2), 5.1 (1) Lifting Height (mm) 170 Allowable Load (kg) 2500 (1 set) Outer Dimensions (mm) 915×300×210 Material Glass fiber + PP Suitable for Tire width: within 280mm
- KTC Pantograph JackThe most loaded screw part of the pantograph jack uses trapezoidal screws by rolling (roll molding) to improve accuracy and durability. * Do not use with a load exceeding the specified capacity. * Do not put your body or part of your body under the jack.Included Accessories Handle
- BAL OHASHI Rubber Tire Stopper (for Light To Ordinary Cars)Curve design that fits the tire perfectly. Compatible with light to ordinary cars.Main Unit Dimensions, Length L x Width W x Height H (mm) 126×76×66 Mass (g) Approx. 750 (2) Color Black Material Rubber
- MonotaRO Aluminum jack Low floor Double pistonA low-floor aluminum garage jack that is ideal for changing tires on low-down cars and is convincing to professionals. Work is quick because it is a double piston type. Moreover, since the cushion is attached to the lower part of the handle, the bumper etc. are less likely to be scratched. Since ... Read MoreSuitable Hydraulic Oil ISO VG 10
- MonotaRO Car DollyWith this card dolly, you can easily move a broken down car. In addition, the casters are made of free steel, so movement is smooth. * Cannot be used in uneven places or in soft areas such as muddy areas. Also, since the casters do not have stoppers, it is extremely dangerous to use them on other... Read MoreMass (kg) 18 (2 pieces) ・ 9 (1 piece) Width (mm) 387 Maximum Load (kg) 450 (2 units) Length (mm) 603 Wheel Diameter (Φmm) 90 Height (mm) About 100~110
- MonotaRO Engine hangerThe engine can be tilted while it is suspended when the engine is lifted or when the engine is attached or detached. You can change the angle of the engine to your liking with your own tools, improving work efficiency. When the engine is attached or detached * Do not enter under the engine while ... Read MoreDimensions (Length L x Width W x Height H) (mm) 442×60×260 Mass (kg) 5.8 Allowable Load (kg) 680 Chain Length (mm) 335
- Amon Industry Reflective Sheet DXSince it is reflected by the light of car headlights, sunlight, etc., it can be recognized day and night. Uses high-brightness reflector. It is flexible and fits well on curved surfaces. With adhesive. For safety measures at night, as a landmark around cars and garages * Product specifications ar... Read MoreQuantity 1 piece (5 pieces) Size 15 × 60mm Thickness 0.6mm Material (Seal) Acrylic adhesive
- DAIJI INDUSTRY (Meltec) 3t Hydraulic JackEasy jack UP with flood control 1 year warranty Ideal for jacking up genuine low-down cars Can also be used for light vehicles, SUVs, and minivans Hydraulic jack * When jacking up the vehicle from the side, please use the jack attachment (sold separately). Jacking up directly may damage the vehic... Read MoreMaximum load capacity (t) 3 Mass (g) 33600 Stroke (mm) About 375 Dimensions, Width W x Height H x Depth D (mm) Approx. 645 x 160 x 345 Color Blue Type Garage lowdown Included Accessories Handle Ground height (mm) Minimum / Maximum: Approx. 90/465 Operating Temperature Range (℃) ‐20~60from ₱16,031.42Min. 5 days
- BAL OHASHI Pantograph JackSG standard compliant productLowest Position (mm) 90from ₱2,795.53Min. 2 days
- SIGNET Aluminum frame jackEasy even for low and high vehicles. Adopting a twin piston, it goes up at twice the normal speed. Lightweight and compact, it is very useful when you are on a business trip. Smooth movement with bearing casters and long handles. The saucer equipped with a rubber pad does not damage the car body ... Read MoreMaterial (Frame) Aluminum, (Other) Steel Specification Saucer Φ99mm
- DAIJI INDUSTRY (Meltec) Meltec Plus 2t Hydraulic Ultra Low Floor Garage Jack Extra High LiftUltra low floor type Twin piston (quick) specifications allow quick jack up Protects the car body with rubber Easy jack UP with flood control 1 year warranty Hydraulic jack * When jacking up the vehicle from the side, please use the jack attachment (sold separately). Jacking up directly may damag... Read MoreMaximum load capacity (t) 2 Mass (g) 46500 Stroke (mm) About 540 Dimensions, Width W x Height H x Depth D (mm) About 915 × 160 × 327 Color Black Included Accessories Handle / Rubber Ground height (mm) Minimum / Maximum: Approx. 75/615 Operating Temperature Range (℃) ‐20~60from ₱27,544.11Min. 5 days
- DAIJI INDUSTRY (Meltec) 3t jack standAdjustable to a height that is easy to work with 10-step adjustment, ratchet type Jack stand * When jacking up the vehicle from the side, please use the jack attachment (sold separately). Jacking up directly may damage the vehicle's jack set position. * Do not use this product for business pu... Read MoreAdjustment method 10 steps Maximum load capacity (t) 3 (when using 2 units) Mass (g) 6300 Stroke (mm) About 125 Dimensions, Width W x Height H x Depth D (mm) About 195 × 290 × 176 Color Blue Ground height (mm) Minimum / Maximum: 290/415 Type heavy
- Toyo Mark Manufacturing Phosphorescent tapeMaterial Phosphorescent tape Color Whitefrom ₱394.31Min. 5 days
- KOTO Jack plateYou can use your garage jack widely just by placing the jack plate. Since the step panel etc. is inserted into the groove of the jack plate, safe work can be performed reliably without damaging the jack point. It is designed to keep the height as low as possible. Considering the use of differenti... Read MoreMass (kg) 1.25 Case Dimensions (mm) 180×170×60from ₱11,919.75Min. 3 days
- BIG RED Floor type mission jackHighest Position (mm) 565 Load (ton) 0.5 Lowest Position (mm) 215 Mass (kg) 34.5 Overall Length (mm) 760from ₱32,478.12Min. 4 days
- KOTO Rigid plateSince the step panel is inserted into the groove of the rigid plate, you can work reliably and safely without damaging the jack point. You can use it with confidence for a long time because it uses a special material that does not damage the car and does not slip.Range to Use (mm) 65~79 Mass (kg) 1.25 Case Dimensions (mm) 190×110×45from ₱9,041.57Min. 4 days
- DAIJI INDUSTRY (Meltec) Meltec Plus 1.5t hydraulic aluminum jack lightLightweight with aluminum, with a large handle that is easy to carry Protects the car body with rubber Easy jack UP with flood control 1 year warranty Ideal for low-down vehicles Hydraulic jack * When jacking up the vehicle from the side, please use the jack attachment (sold separately). Jacking ... Read MoreMaximum load capacity (t) 1.5 Mass (g) 14500 Stroke (mm) About 265 Dimensions, Width W x Height H x Depth D (mm) About 550 × 130 × 240 Color Black Included Accessories Handle / Rubber Ground height (mm) Minimum / Maximum: Approx. 90/355 Operating Temperature Range (℃) ‐20~60from ₱22,198.93Min. 5 days
- Toyo Mark Manufacturing Phosphorescent sheetDimension (mm) 110×280×1 Material High brightness sheet Color Whitefrom ₱698.57Min. 5 days
- ESCO 25ton truck jack (pneumatic / portable)Working Air Pressure (MPa) 0.8~1 Load Capacity (ton) 25 Minimum Height H (mm) 230 maximum jacking height (mm) 455 Esco Part No. EA993LN-25 Mass (kg) 18.5from ₱61,634.01Min. 6 days
- MonotaRO Wheel Chocks for Automobiles Made of RubberA rubber tire stopper that can be used from light cars to ordinary passenger cars. Since it is made of rubber, the tires do not slip easily during installation. When parking on a slope. Assistance when jacking up. * When parking on a slope, install it on the left and right tires on the lower side... Read MoreMain Unit Dimensions, Length L x Width W x Height H (mm) 127×70×62 Mass (g) 330 (1 pc.) Color Black Material Synthetic rubber
- MonotaRO Tire Stopper Made of Resin for AutomobilesTo prevent the car from rolling. It can be used for passenger cars, light trucks, etc. Made of resin, it is light and easy to carry. It is easy to understand because the color is orange and stands out. When parking on a slope. Assistance when jacking up. * Do not use for any other purpose. * Comp... Read MoreDimensions (Length L x Width W x Height H) (mm) 160×86×100 Mass (kg) About 0.29 (1 piece) Color Orange Material PP
- MonotaRO Car verification case Business card pocket horizontal typeIt is a simple type product that only includes car verification. The business card pocket is for horizontal business cards. You can choose your favorite color from 6 colors. For storage of vehicle verification. * Please do not use it for any purpose other than its intended purpose.Dimension (mm) 312×220 Material Enbi / colored fabric with wrinkles Suitable for Horizontal business card Specification Single piece type
- MonotaRO Panta JackLift the vehicle speedily. The operation is light and easy to work with. Lightweight and compact, it is easy to carry. Used for automobile tire replacement and tire chain installation. * Before using this product, read the instruction manual carefully and fully understand it before using it. * Pl... Read MoreMaximum Load (t) 1 Mass (kg) 2.5 Stroke 292 Highest Position (mm) 380 Dimensions (Length L x Width W x Height H) (mm) 430×46.5×88~380 Lowest Position (mm) 88 Included Accessories Handle Material Iron Thread Standard TR12.5X2.5
- JET INOUE Wheel stops for passenger carsDesigned with a unique radius and groove, it fits best from light cars to passenger cars !! Load test completed! Durable and light about 350g Security parts * 12 to 15 inches is a guideline for conformity. * Please check the tire size you are using before purchasing.Suitable for 12-15 inch (passenger car) Material PE/PP Included Accessories Reflective tape x 2 Dimensions (Length L x Width W x Height H) (mm) Approx. 170 × 90 × 105 (single item) Color Orange Mass (g) Approx. 350 (single item)
- TRUSCO Tire StopperIdeal for bollards on gentle slopes and flat terrain.Height (mm) 103 Length (mm) 162 Load capacity (t) 2 Opening Width (mm) 87 Material Polypropylene (PP)
- MonotaRO Floor Jack Hydraulic 3TIdeal for working on large passenger cars such as SUVs, 4WDs, and one-box vehicles. * Please use a garage jack for business use. * When jacking up the vehicle, be sure to use the jack stand (sold separately) together. * Be sure to read the attached instruction manual carefully before using. * Bec... Read MoreOperating Temperature Range (℃) -20~45 Lowest Position (mm) 135 Height (mm) 145 Mass (kg) 16.7 Width (mm) 240 Maximum Load (t) 3 Highest Position (mm) 400 Size (Φmm) 50 Handle Length (mm) 525 Overall Length (mm) 580 Suitable Hydraulic Oil ISO VG15
- MonotaRO Sales contracts for car salesIt is a must-have item for car dealers. You can use it at the time of purchase. It is very convenient with a receipt. * Do not use for anything other than its intended purpose.Dimensions (Width W x Height H) (mm) About 180 × 260 Specification 3 copies / 30 sets
- EMERSON Automotive Jack Lift HelperBy attaching it to the on-board panto jack, you can jack up / down with an electric impact wrench or air impact wrench, so you can use the on-board jack like an electric jack. * Manually turn this product or the base of the jack until the receiving part of the panda jack touches the jack point an... Read MoreHex Width Across (mm) 21 Material Alloy steel
- MonotaRO Hydraulic floor jack 2tEasy operation because it is hydraulic. Ideal for jacking up light vehicles to ordinary passenger cars! Car tire replacement, tire chain attachment / detachment, etc. * Please use a garage jack for business use. * When jacking up the vehicle, be sure to use the jack stand (sold separately) togeth... Read MoreOperating Temperature Range (℃) -30~50 Lowest Position (mm) 140 Maximum Load (t) 2 Highest Position (mm) 380 Dimensions (Length L x Width W x Height H) (mm) 520×205×140
- MonotaRO Jack stand foldableA must-have for jacking up! Foldable and convenient for storage! It is supported by 4 points of 3 legs around + center leg, so it has a great sense of stability! The push lock pin prevents the pin from coming off. The height can be adjusted in 3 steps, which is very convenient. For vehicles * Whe... Read MoreLowest Position (mm) 299 Mass (kg) Approx. 1.6 (1) Suitable for (Vehicle) 2t or less Load Capacity (ton) 2 (when using 2 units) Highest Position (mm) 365
- OHNO (OHNO RUBBER INDUSTRIAL) Lift PadA damaged putt is dangerous. Regular replacement is recommended for safe maintenance. * 2 sets are required for 1 unit.
- DAIJI INDUSTRY (Meltec) Tire StopperIt is a rubber tire stopper that can be used for passenger cars from all types of light 4 and is firmly fixed when parking on a slope or jacking up. Contains 4 reflective tapes to prevent rear-end collisions and forgetting to remove at night. It can be set back and forth and firmly fixed. The jag... Read MoreDimensions (H x W x D) (mm) 60×78×126 Mass (g) 700 Color Black Included Accessories Reflective tape (4 sheets), string Material Rubber
- MonotaRO Business card pocket vertical type with inside bag for car verificationSince it is a car verification case with a middle bag, you can store the car verification in the middle bag and store the liability insurance and recording paper in the pockets on both sides. The business card pocket is for vertical business cards. You can choose your favorite color from 4 colors... Read MoreDimension (mm) 355 x 235 (middle bag 304 x 220) Material Enbi / colored fabric with wrinkles Specification Two-fold Suitable for Vertical business card
- MonotaRO Low floor floor jack 2tA low-floor garage jack ideal for changing tires on low-down vehicles. The low structure of the entire arm makes it easy to access deep jack points. For jacking up when changing tires * When jacking up the vehicle, be sure to use the jack stand (sold separately) together. Please be sure to read t... Read MoreMass (kg) 13 Maximum Load (t) 2 Handle Diameter (Φmm) 21.3 Lifting Range (mm) 290 Highest Position (mm) 375 Handle Length (mm) 500 Dimensions (L x W x H) (mm) 560×212×130 Lowest Position (mm) 85 Suitable Hydraulic Oil ISO VG 10
- EMERSON Jack Stand 3TA must-have for jacking up !! Safe and secure 3t type. With a rubber pad that will not damage your car !!Load Capacity (ton) (Maximum) 3.0 Main Unit Dimensions, Width W x Depth D x Height H (mm) 195x207x260 Lowest Position (mm) 260 Mass (kg) 3.3/piece Highest Position (mm) 415 Specification 7-step adjustment
- DAIJI INDUSTRY (Meltec) Jack Attachment for SideYou can jack up from the side of the carMass (g) 360 Outer Dia. x Height H (Φmm x mm) 50×37 Material PU (polyurethane resin)