Automotive

The most loaded screw part of the pantograph jack uses trapezoidal screws by rolling (roll molding) to improve accuracy and durability. *Do not use with a load exceeding the specified capacity. *Do not put your body or any part of your body under the jack.

By using polypropylene, it is lightweight and has excellent oil resistance. The multi-stage cup shape supports the four main sizes of downward oil filters. The inner circumference shape follows the KTC cup type oil filter wrench, and firmly captures the oil filter. Uses a 250mL dedicated bottle t... Read More

It is a penetration type. Pry: Adjust the tension of V-belt and flat belt. Expand: The task of removing the mission from the engine. / Separation work of strut and lower arm. Pull out: The work of pulling out the drive shaft from the mission (diff). Removal work of oil seals, gears, bearings, etc.

A portable, small top-pulling type. Convenient for business trip maintenance.

As it is a simple type, no installation work is required. Compact and lightweight, easy to move. Separate type that can be used for vehicles of various widths. The total length is short and it can be installed in a small space. The height of the main body is low (28 mm) and it has a slope for smo... Read More

Side slip board set This is the step board that comes with the ATG92.

* The compatibility of the main engine used may vary depending on the model, model year, and engine model, so check the outer diameter of the oil filter. * This product is for manual use. Do not use power tools such as impact wrenches. * Do not use anything other than a filter paper replacement o... Read More

A fluid inhaler, a must-have item for brake air bleeding work. Brake fluid replacement for automobiles and air bleeding work in piping.

Since the shaft length is long, the wheel does not hit the tool and workability is improved. (Shaft length 165mm) The grip has a small diameter to make it easier to turn.

Comes with a magnet that allows you to work even in deep places. Thin wall type * Do not hang a wrench on the outer circumference and turn it. (B3A-14SP)

It is a spare part for the ball joint boot tool set ATS4111 and the ball joint boot inserter set ATS4110.

A service creeper with excellent workability that uses a pipe frame and high-density cushion designed so that it does not interfere with the shoulder area. The rubber 6-wheel free caster adopts Φ75, making it smoother and more durable.

Adopted a new shape that is easy to distinguish from deep sockets. Comes with a magnet that prevents the spark plug from falling.

It is a large waste liquid tank. A must-have item for brake air bleeding work.

By adopting the insert manufacturing method, iron (steel material) is used for the drive corners, and the aluminum part is also thickened to improve proof stress. Detachment work of engine oil filter cartridges for 2-4t class trucks, buses, etc. * Even if the engine type is the same, the size may... Read More

By adopting a 17mm hexagonal drive, it is possible to work even in narrow places with obstacles. Stable fastening work of the drain plug is realized by making the square convex dimension 10.0 mm. By setting the drive angle to 9.5 sq., Which is the mainstream for automobile maintenance, work effic... Read More

Uses a flexible shaft with improved workability.

Using resin containing fiber, the remover adopts a new shape, the clip in the recessed part can be removed, and the spatula type corresponds to the removal of the audio panel and the cap of the service hole. For removing the interior of a car.

Cleanly stores tools in tool boxes and cabinets. You can freely rearrange the base and arrange the rack pins, so you can organize them to your liking. The material is PP resin. It is lightweight and has excellent chemical resistance. It is also ideal for shortening maintenance efficiency and appe... Read More

Applicable to 3 size clips, large, medium and small, and long straight and various items. The large size clip clamp tool has a tip mortar shape that matches the shape of the clip. Removing car linings and clips. Ideal for lining domestic car doors, back doors, quarter panels, floors, etc.

The wrench shape that firmly holds the corners of the nut allows the nut to be tightened and loosened without slipping. Wide grip that does not hurt your hands even if you apply force. The total length is the optimum length that does not interfere with the surroundings when the steering wheel is ... Read More

The ABX-33 has a grip that is easy to grip, and can be pressed and pin-turned. The ABX-34 can hold the cup with a tapered cup holder for speedy work. Remove and install the shoe hold spring of the drum brake of a passenger car.

Uses fiber-containing resin, has a thin tip shape, and can be inserted into small gaps For removing the lining of automobiles.

Removing car linings and clips.

For installing and removing wheel nuts.

It can be fixed using the lock part of the door. Compatible with most car models. It can be easily attached and detached.

It is convenient when the cooling system hose is blocked, especially when using the KTC coolant charger. Brake hose blockage when removing struts. Blockage of ATF hose during AT attachment / detachment. The vacuum hose is blocked when inspecting catchers in a decelerated state. The fuel hose is b... Read More

The tray is made of rust-resistant stainless steel, and the rubber-mounted magnet holds it with a magnetic force of about 1000 gauss. * Do not use in places where it is adversely affected by magnetism.

By using a resin containing fiber and making the tip thinner, it corresponds to the notch part such as the switch base cover. For removing hole plugs and switch base covers inside automobiles.

By adopting 12.7sq., It can be used for drain plugs that are tightened with a large torque. Since the main body has a hexagonal shape, it is possible to use a 24 mm wrench. A special tool for tightening and loosening the differential drain (filler) plugs used in Nissan and Subaru vehicles.

By sandwiching the shaft of the clip and removing it, the clip is less likely to be damaged. The shaft of the clip can be held by the mating hole with a radius of 3.5 mm provided at the tip.

A large circular magnet secures a load capacity of 3 kg. The back magnet is equipped with a rubber that does not easily damage the mounting target. A holder for storing spray cans that can be attached to the side of a cabinet, etc. * Do not place more than the load capacity.

Can be used for both tightening and loosening. Stable work is possible because the three rollers grab the stud bolts from three directions. Since the center penetrates, it can also be used for stud bolts that are longer than the wrench body. (When using a glasses wrench, etc.) Detachment of stud ... Read More

The lock nut can be crimped and crimped with this one! Due to the shape of the tip boat, you can crimp cleanly just by pushing in and hitting. The grip is made of rubber, which is easy to grip, and has a brim, so it is difficult to accidentally clap your hands. Strong because it is a forged produ... Read More