It is a compact design.
Oil-free compressor for airbrush.
Dimensions, Width W x Depth D x Height H (mm) 150×150×180 No-load air consumption (L / min) 9.0 (at 0.2MPa / 4.5) Maximum Operating Pressure (MPa) 0.30 Mass (kg) 2.6 Power Input (V) Single phase 100 Power Consumption (W) 85 Trusco Part No. 380-7461
Since the finish of the coated surface and the amount of paint discharged are greatly affected by the paint viscosity, it is necessary to maintain an appropriate paint viscosity depending on the paint and the object to be coated. You can control the paint viscosity more scientifically without rel... Read More
Mass (g) 255 Overall Length (mm) 273 Trusco Part No. 322-9637 Capacity (cc) 47 Cup Diameter (Φmm) 57 Height (mm) 61
High coating efficiency and low scattering make it possible to reduce the amount of paint used. It is useful for improving the painting environment because there is little scattering and rebound of paint mist.
For automobiles, metals, woodworking, furniture and plastic painting.
* Cup is sold sep... Read More
Paint Inlet (Cup Air) G1 / 4 Required Compressor (kw) 0.2~0.75 Mass (g) 220 Air Consumption (L/min) 50 Material (Main Unit) Aluminum die casting Specification Gravity type Atomization High fines Material (Connecting Part) Stainless steel
Achieves a weight reduction of 5g compared to the past. Since the various knobs are tapered and the grooves are deepened, it is easy to make fine adjustments due to the high grip. In addition, smooth paint adjustment is possible by incorporating resin parts behind the needle valve spring. Further... Read More
Mounting Screw Diameter (Paint): G1 / 4, (Air): G1 / 4 Air Pressure (MPa) 0.24 Spray Distance (mm) 200 Mass (g) 290 Paint Feeding System Gravity type
Achieves a weight reduction of 5g compared to the past. Since the various knobs are tapered and the grooves are deepened, it is easy to make fine adjustments due to the high grip. In addition, smooth paint adjustment is possible by incorporating resin parts behind the needle valve spring. Further... Read More
Mounting Screw Diameter (Paint): G3 / 8, (Air): G1 / 4 Air Pressure (MPa) 0.29 Spray Distance (mm) 250 Mass (g) 375 Paint Feeding System Suction type
Achieves a weight reduction of 5g compared to the past. Since the various knobs are tapered and the grooves are deepened, it is easy to make fine adjustments due to the high grip. In addition, smooth paint adjustment is possible by incorporating resin parts behind the needle valve spring. Further... Read More
Mounting Screw Diameter (Paint): G1 / 4, (Air): G1 / 4 Air Pressure (MPa) 0.24 Spray Distance (mm) 200 Mass (g) 290 Paint Feeding System Suction type
A series specializing in environmentally friendly paints (low solvent 1-component base coat, high solid clear, etc.) and high-difficulty paint colors (color clear, matte clear, etc.) that are currently mainstream. Realization of "wet coat" by optimal "flat & wide pattern" ... Read More
By exchanging the paint nozzle, it is possible to handle various coating materials from fine particles to coarse particles, and the amount of ejection can be easily adjusted.
Architectural painting
Working Air Pressure (MPa [kgf/cm2]) 0.29[3] (standard) Suitable Air Compressor (kw) 0.75 or more Capacity (L) 2 Mass (g) 660 Air Consumption (L/min) 76 Blowing Direction Universal
Ideal for painting and dyeing for plastic models, textile drawing, arts and crafts, do-it-yourself, etc. In addition, it can also be used for extremely small scratches on automobile repair.
For painting plastic models, drawing textiles, arts and crafts, do-it-yourself, etc.
* Cup is sold separately.
Paint Inlet (Cup Air) G1 / 4 Required Compressor (kw) 0.2~0.75 Mass (g) 180 Material (Main Unit) Aluminum die casting Material (Connecting Part) Brass, stainless steel Atomization General purpose Specification Gravity type
An economical purifier that compactly integrates an air purifier and a pressure reducing valve.
* Cannot be used for applications that fall under the High Pressure Gas Safety Act.
Mass (kg) 2.5 Filtration (μm) 20 Air Flow Rate (L/min) 780 Maximum Operating Temperature (Flowing Fluid Temperature) ℃ 80 Mounting Thread Size (B) G1/4(PF1/4) Draining Type Manual
Achieves a weight reduction of 5g compared to the past. Since the various knobs are tapered and the grooves are deepened, it is easy to make fine adjustments due to the high grip. In addition, smooth paint adjustment is possible by incorporating resin parts behind the needle valve spring. Further... Read More
Mounting Screw Diameter (Paint): G3 / 8, (Air): G1 / 4 Air Pressure (MPa) 0.29 Spray Distance (mm) 250 Mass (g) 375 Paint Feeding System Gravity type
Air pressure can be controlled and adjusted with a small hand pressure gauge that does not lose balance when attached to the spray gun.
Air pressure management.
nipple (Air) G1 / 4 Trusco Part No. 380-7274 Mass (g) 95 Material (Main Unit) Brass Adjustment method Screw type
Achieves a weight reduction of 5g compared to the past. Since the various knobs are tapered and the grooves are deepened, it is easy to make fine adjustments due to the high grip. In addition, smooth paint adjustment is possible by incorporating resin parts behind the needle valve spring. Further... Read More
Mounting Screw Diameter (Paint): G1 / 4, (Air): G1 / 4 Spray Distance (mm) 200 Mass (g) 290 Suitable Air Cap Type E2P Atomization High fines Paint Feeding System Pumping type
Equipped as standard with an air adjustment knob that allows fine adjustment of the amount of air.
For all kinds of painting and art design, including vehicle painting.
Material Brass Air Nozzle Port G1/8 Paint Feeding System Gravity type