Constant Temperature Water Baths & Devices
A constant temperature water tank or constant temperature device is a device that creates a constant temperature regardless of the outside air temperature. A common method is to adjust the temperature of the liquid in the tank with an electric heater to keep the tank at a constant temperature. It is mainly used for experiments and tests, and is used for various purposes such as holding samples at high temperatures such as culturing microorganisms, durability tests for resins, paints, plywood, etc., measurement tests for viscosity and specific gravity, and inspections for thermometers and temperature sensors. will be Many of them are capable of high-precision temperature control of ±0.01°C to ±0.1°C, and some are even equipped with timers, dry heating prevention functions, and sterilization functions, allowing selection according to the application.
Other Related Pages
- SANSYO High and low temperature circulatorLiquid can be easily discharged from the front. Space-saving design. It can be heated quickly with an 800W heater. Overheat prevention function that can be adjusted according to the operating temperature. With a liquid level drop prevention function as a safety device.Specification Temperature stability: ± 0.05 ° C Power Input (V) AC100(50/60Hz) Heater (W) 800 Tank Capacity (L) 4~6 Nozzle Outer Diameter (Φmm) 10 Refrigerant R-134afrom ₱205,542.64Min. 9 days
- AS ONE PP BallSince it is a hollow molded ball, there are no holes. It has excellent chemical resistance and can be used on various liquid levels. It prevents the diffusion of gas and odor and can be used for a long time. For keeping warm in water baths, etc.Material PP (polypropylene) Continuous Use Temperature (℃) 110from ₱3,658.98Min. 2 days
- AS ONE Anti-corrosion and Rust Protective (No Phosphorus)It prevents algae and scale from growing in the constant temperature bath and analysis tank, so frequent water replacement is not required. Protects the metal surface from rust and corrosion.How to Use Add 100mL per 10L
- AS ONE Hot StirrerSince the control unit cover is made of PP, it has excellent chemical resistance. If the temperature rises excessively, the heater will be forcibly turned off and an error message will be displayed.Operating Temperature Range (℃) Room temperature + 5-95 Power Input (V) AC100 50/60Hz Safety Device Circuit breaker bimetal thermostat Temperature Sensor RTD (Pt100Ω) Temperature Control Microcomputer proportional control Heater Capacity (W) 750from ₱20,554.26Min. 2 days
- AS ONE ThermaxHighly accurate temperature control is possible by adopting a newly developed temperature control algorithm and a platinum temperature sensor with little error. An easy-to-use jog dial input method is used for temperature setting and timer setting, enabling quick and reliable setting. Highly accu... Read MorePower Supply AC100V 50/60Hz Sensor Pt100Ωfrom ₱40,701.47Min. 2 days
- AS ONE Thermal Robo TR Series (Water Bath)All models are equipped with a float type air-heating prevention, and a lineup of types with adjustable flow rate! Water flow switching (strong / weak) is now possible! The agitation pump adjustment function allows the pump flow rate to be switched in two stages depending on the object. I can. Mi... Read MoreIncluded Accessories PP (polypropylene) water tank Type Water bath Maximum Pumping Rate (L/min) 10 Sensor Thermistor Heater Capacity (kW) 1 (made of stainless steel (SUS316)) Timer Setting 1 minute to 99 hours (1 minute unit) Temperature Setting Range (℃) -20.0~+80.0 Stirring method Jet stirring typefrom ₱49,298.98Min. 2 days
- AS ONE M BallGreat energy saving with a small ball. Due to the special hollow molding, there is no suction port and the liquid does not penetrate inside. Lightweight and does not corrode. Since it has a large evaporation prevention effect, it is economical with no heat loss.Specification Unit area: 2,800 pieces / m 2 Material PE (polyethylene) Continuous Use Temperature (℃) 80 As ONE Part Number 1-089-02 Quantity 1 box (500 pieces)from ₱6,163.40Min. 2 days
- AS ONE Stirred Bath RackBy using it as a drainboard for a bass stirrer, the inside of the aquarium is agitated to make the temperature uniform. You can use a stirrer to stir the beaker on the drainboard at the same rotation speed. It can be used not only for water bath stirrer but also for oil bath stirrer (up to ~ 200 ... Read MoreIncluded Accessories Hexagonal wrench Material (Main Unit) Stainless steel (SUS304 / 430) etc. Operating Temperature Range (℃) 5~200 As ONE Part Number 3-1496-01from ₱10,686.24Min. 2 days
- AS ONE Hot StirrerSince the control unit cover is made of PP, it has excellent chemical resistance. If the temperature rises excessively, the heater will be forcibly turned off and an error message will be displayed. * Duckboards are not included.Operating Temperature Range (℃) Room temperature + 5-95 Power Input (V) AC100 50/60Hz Safety Device Circuit breaker bimetal thermostat Temperature Sensor RTD (Pt100Ω) Temperature Control Microcomputer PID control Heater Capacity (W) 750
- KOKUGO PP ballUse a hollow ball to prevent evaporation and scattering of liquids. Continuous use temperature: 110 ℃from ₱3,206.70Min. 6 days
- Sugiyamagen Constant Temperature Bath (BathTool(R))It is used by connecting to a homeothermic circulation device. The outer jacket is vacuum-insulated with a triple-structured can. It has excellent moisturizing properties and has a structure that makes it difficult for heat to be transferred to the outside of the can, making it difficult for cond... Read Morefrom ₱26,721.78Min. 2 days
- AS ONE Cooling coil for constant temperature water bath (with window) TRW-CModel Number TRW-C As ONE Part Number 1-5457-11from ₱11,919.75Min. 4 days
- SANSYO PP ballPrevents evaporation and scattering of liquids. Hollow ball without holes. Please choose the size according to your application. The heat resistant temperature is 120 ° C.from ₱6,985.74Min. 9 days
- AS ONE My Locker Container PP 180 TypeMaterial Made of PP (polypropylene) Model Number 180 type Tank Capacity (L) 22.1 As ONE Part Number 5-206-02from ₱2,672.18Min. 4 days
- AS ONE large water bathMaterial (Main Unit) Stainless steel (SUS304) Power Supply AC100V 50/60Hz Temperature Sensor K thermocouple Temperature Control Microcomputer PID control Temperature Setting Range (℃) Room temperature +5 to 80 As ONE Part Number 3-1480-01 Temperature control accuracy (℃) ±2from ₱53,410.66Min. 4 days
- AS ONE Large water bath BWB-300 dedicated drainboardMaterial (Main Unit) SUS304 As ONE Part Number 3-1480-11from ₱3,206.70Min. 4 days
- AS ONE water bathMaterial (Main Unit) Stainless steel (SUS430) Tank Capacity (L) 5 Temperature Sensor K thermocouple Temperature Control Microcomputer PID control Temperature Setting Range (℃) Room temperature +5 to 80 As ONE Part Number 1-3146-41from ₱40,290.30Min. 14 days
- AS ONE Lacom Ace (flat type thermistor type)Specification Stirring: Jet pump with thermometer Operating Temperature Range (℃) 27~80 Model Number HT-80 Temperature Accuracy ±0.1~0.2℃ Heater Capacity (kW) 1 Power Cable 3P type As ONE Part Number 1-107-03 Maximum power AC100V 11Afrom ₱65,745.69Min. 4 days
- SIBATA SCIENTIFIC TECHNOLOGY Water bath WB-22S type・A stirring water bath equipped with a stirrer.・The Φ240mm tank can heat relatively large flasks.Included Accessories Stirrer (1 piece) Type Stirring type Power Supply AC100V 50/60Hz 8A Tank Capacity (L) 4.5 Temperature Control Accuracy ±3℃ Temperature Control Range (℃) Room temperature +5 to 90 Temperature Control Liquid expansion type Heater Capacity (W) 750 Rotational speed 0~1000rpm Stirring capacity Built-in magnetic stirrerfrom ₱57,522.34Min. 10 days
- Nissin Rika Mini shaking water bathShaking for a small amount of sample A constant temperature water tank with a simple shaking mechanism but sufficient durability. Quickly respond to experiments with a small-capacity bus. The microtube shaker (M-20) has a splash cover type so that the mouth of the upper part of the sample tube is... Read MorePower Supply AC100V 50/60Hz Temperature Range (℃) (Room temperature +5)-60 Motor (W) Condenser type: 3 Temperature Accuracy ±0.1℃(at37℃) Number of Shaking(min -1 [rpm]) 20~220 Heater Capacity (W) 150 Temperature setting 0.5 ° C unitfrom ₱123,309.14Min. 9 days
- Tokyo Glass Kikai (TGK) Fine mini water bathIt is a mini size for personal use. Comes with a float type air-heating prevention device. Use the lid for long-term specifications (optional).Power Supply AC100V 50/60Hz 5.5A Temperature Range (℃) Rt+5~80 Temperature Accuracy ±0.1℃ Material (water tank) SUS304 Stirring method Jet jet typefrom ₱53,410.66Min. 49 days
- NARIKA Constant temperature water (water bath)An affordable water bath with a sheathed heater and a liquid inflatable temperature controller attached to a stainless steel bath. With a function to prevent empty heating.Type E-1 Power Supply AC100V 50/60Hz Temperature Range (℃) Room temperature + 5-95 Heater (W) 400from ₱23,432.44Min. 10 days
- KENIS Digital water bathThe temperature is adjusted with high accuracy of ± 0.1 ° C by PID control. The stirring and ejection direction is variable and can be used in various aquariums. The NC type comes with a PP water tank, and the NC-S type comes with a stainless steel water tank.Operating Temperature Range (℃) Room temperature +5 to 80 Power Supply AC100V・50/60Hz・11A Heater Capacity (W) 1000 Material (water tank) PPfrom ₱69,857.36Min. 11 days
- Tokyo Glass Kikai (TGK) Fine digital tabletop water bathAn ultra-compact, space-saving precision constant temperature water tank. Equipped with a stirring nozzle that allows you to select the ejection amount and direction with good stirring efficiency. Although it is small, it comes with a float type air-heating prevention device. The operation reache... Read MorePower Supply AC100V 50/60Hz 8A Temperature Range (℃) Room temperature +5 to 70 Accuracy ±0.1℃(at37℃) Heater (W) 700 Temperature Control Digital PID controlfrom ₱65,745.69Min. 49 days
- AS ONE Digital Temperature ControllerType Communication USB cable 2.0m As ONE Part Number 1-4594-26from ₱2,302.13Min. 4 days
- AS ONE EC Water Bath Digital With Pre-Shipment Inspection CertificateSince the control unit cover is made of PP, it has excellent chemical resistance. If the temperature rises excessively, the heater will be forcibly turned off and an error message will be displayed. Digital * An inspection inspection report is attached at the time of shipment.Included Accessories Inspection inspection documents Specification Heater capacity: 750W Power Supply AC100V 50/60Hz Safety Device Circuit breaker bimetal thermostat Temperature Sensor RTD (Pt100Ω) Temperature Control Microcomputer PID control Temperature Setting Range (℃) Room temperature + 5-95 As ONE Part Number 1-2944-01-22from ₱35,356.29Min. 4 days
- KENIS Digital incubatorAn incubator that can be set simply by placing it in one corner of a flat, shallow water tank. The NT-701D-A type comes with an acrylic transparent water tank, and the NT-701D-S type comes with a stainless steel water tank.Operating Temperature Range (℃) Room temperature +5 to 80 Power Supply AC100V・50/60Hz・11A Temperature Control Digital PID control Temperature Control Accuracy ±0.1℃ Heater Capacity (W) 1000 Stirring method Jet jet typefrom ₱82,192.39Min. 7 days
- YAMATO SCIENTIFIC Immersion thermostat optionImmersion type constant temperature device Thermomate, various optional itemsfrom ₱8,219.24Min. 6 days
- THOMAS Constant temperature water tankExcellent temperature stability can be obtained by time-proportional control. The circulating jet agitation mechanism keeps the temperature distribution inside the aquarium uniform. Easy temperature setting with dial. The water temperature is displayed digitally. Equipped with a power fuse and a ... Read MorePower Supply AC100V 50/60Hz 10A Temperature Range (℃) (Room temperature +5)-60 (MAX80) Heater Sheath wire type 1kW Temperature stability Within ± 0.1 ℃from ₱61,634.01Min. 12 days