Test Tube Racks for Experiment & Research

●AS5 has 5-color racks (blue, green, red, purple, and white) that can be used separately for each application. ● Autoclavable.

● 80 1.5 mL/2.0 mL microtubes and screw cap tubes (all sizes) can be accommodated. ● Surfaces are numbered from 1 to 80. There are 60 0.5 mL holes (4×15) on the back.

● A 96-well PCR tube rack for 0.2 mL. ●8 x 12 rows of 96 holes allow 8 and 12 rows of PCR tubes to be used. The product can be used from ●-90°C to 121°C. Autoclave or cryopreservation is possible. ● Alphabetic characters are stamped in columns and numeric characters are stamped in rows, making... Read More

●8 x 12 rows of 96 holes allow 8 and 12 rows of PCR tubes to be used. ● Autoclave or cryopreservation is possible.

This rack has holes with different diameters on three sides, and can hold centrifuge tubes and microtubes. The height of the three surfaces is the same, so they can be used side by side. If they are stacked one on top of the other, they can accommodate two in a single space, which is not necess... Read More

From 0.5 ml to 50 ml conical tubes, you can change the orientation of the rack to store 4 sizes of tubes. Racks can be connected to each other. Made of PP. Autoclave is possible.

● Light-resistant tube racks that are convenient for storing samples that need to be shielded from light, such as fluorescent markers. Freezing at ●-90℃ and autoclaving (121℃) are possible. ● Numerals and alphabets are attached to the outer frame, and sample position control is easy. You can st... Read More

It is a two-stage tube rack for 1.5 mL, and the tube receivers are numbered # 1 to # 20 in advance for convenient sorting work. * Rubber feet are not attached

● This case is convenient for sorting and storing chips and microtubes because the mouth opens largely by simply pulling it forward and tipping it down. ● Cases can be freely connected to each other depending on the installation location.

80 polypropylene 1.5-2.0 ml tubes can be erected

100 microtest tubes 1.5 ml can be placed.

The compact design allows it to be stored in a deep freezer (-80 ° C).

A rack with a lid that is convenient for standing 0.2 mL PCR 8-unit tubes. Twelve 1.5 / 2.0 mL tubes and 12 8-tube tubes can be stored on one side, and 96 0.5 mL tubes can be stored on the other side. Alphabets and numbers are written on the storage surface, which is convenient for identifying sa... Read More

It is a structure that can connect tube racks to each other. Colorful 5-color set 5 colors (blue, green, rose, yellow, orange) Autoclave possible (121 ℃)

For 1.5 / 2.0 ml of 96 stands, which is one size larger than a general 80 stand rack. Well spacing 18 mm. The bottom of the well is shaped to stabilize the tube

Made of aluminum with good thermal conductivity, it cools faster and reaches a lower temperature than when the tube is inserted directly into ice.

Made of polycarbonate with non-slip rubber. Autoclave is possible.

It is easy to manage because it is numbered on the lid and the middle grid. It is possible to prevent mistakes in covering the lid. As it contains 5 colors, it is convenient for identifying each sample. A 5-color set that is convenient for proper use.

A tube rack with removable legs. Adjust the leg length so that the tube containing a small amount of sample does not rise in the water bath. You can use it as a normal tube rack by removing the legs.

It has a two-step step, making it easy to use. Anti-slip rubber is attached to the corner of the base.

Since it can be stacked and stored, it can be stored in a small space. Suitable for keeping tubes warm and cold in water baths and cool baths.

It is possible to store tubes of different sizes. Can be connected. Autoclave possible

20 5Φ tubes and 24 10Φ tubes can be erected at the same time. For storage, transportation and drying.

Assembled rack for 15mL and 50mL conical tubes. When not in use, it can be disassembled and stored in a small space. This is useful when using many tubes at once.

Floating the microtube on a water bath or beaker, it is convenient for raising and lowering the temperature in a water bath or ice bath. There is a handle in the center of the rack, which is convenient for taking out.

Stackable so it doesn't take up space.

20 1.5ml tubes are erected, and 10 tubs are in a two-row staircase pattern. With non-slip rubber.

Since it floats on water with the microtube containing the sample set, it is suitable for thawing and reacting frozen samples. Even if you put it in the aquarium, it will firmly fix the tube. Since it has legs, the tip of the tube does not touch the laboratory table. The round type is convenient ... Read More

Tube rack with cover designed for PCR processing. 96 holes in 8 x 12 rows for 0.2 ml microtubes. A to H and 1 to 12 are printed vertically and horizontally for easy identification. * Fluorescent blue, fluorescent green, fluorescent orange, fluorescent pink, fluorescent yellow 1 each

A unique rack consisting of 4 cubes and trays. Holes of different diameters are drilled on the four sides of the cube, and tubes of the following sizes can be erected. 15ml, 50ml Conical tube Φ12 × 75mm Culture tube Φ13 × 100mm Culture tube Φ16 × 125mm Culture tube Φ17 × 100mm Culture tube 1.5ml,... Read More

Easy to assemble

Autoclaving is possible at 121 ° C for 20 minutes or less.

It is possible to dry the test tube while suppressing dust contamination. Since the test tube is inserted between the rods, the contents of the test tube are easy to see. It sinks in water. Autoclave possible

Can be used as a work rack for 96-well PCR plates. With a lid that snaps closed. Operating temperature: -80 to + 121 ° C. Autoclave possible (121 ° C, 15 minutes)

Autoclave possible

Comes with a hinge lid that can be easily opened and closed with one hand. The lid opens 180 degrees. Numbers and alphabets are numbered on the bottom of the main unit for sample identification. It has a high light-shielding property and is ideal for storing samples that dislike light. Made of PP.