Has excellent alkali resistance and organic solvent resistance.
* D1 is the outer diameter of the tip on the bamboo shoot side. D3 is the inner diameter dimension on the screw side.
Material Polyamide 6 Operating Temperature Range (℃) -10~+70℃
Has excellent chemical resistance, abrasion resistance, and impact resistance. It also complies with the Food Sanitation Law and REACH standard.
* The inner diameter of the tube used is a guide.
Simply insert the tube into the nut set on the fitting body until it hits the stopper, and tighten the union nut to achieve the specified performance. Has excellent chemical resistance.
Maximum Operating Pressure (MPa [kgf/cm 2 ]) 1mm thick tube (25 ℃) / 1 [10] Continuous Use Temperature (℃) -15~150 Suitable Fluid Most acids, alkalis, solvents
Simply insert the tube into the nut set on the fitting body until it hits the stopper, and tighten the union nut to achieve the specified performance. Has excellent chemical resistance.
Maximum Operating Pressure (MPa [kgf/cm 2 ]) 1mm thick tube (25 ℃) / 1 [10] Continuous Use Temperature (℃) -15~150 Suitable Fluid Most acids, alkalis, solvents
L-shaped tube joint with male screw on one side. Since it is an F-lock seal, there is no need to worry about the tube coming off. It can also be replaced with a normal abacus type seal.
For liquid delivery
Material PFA/PTFE Shape Elbow Mass (g) 20 Applicable Pipe Outer Diameter (inch) 1/4 As ONE Part Number 61-3534-99 Screw size R1/4
L-shaped tube joint with male screw on one side. Since it is an F-lock seal, there is no need to worry about the tube coming off. It can also be replaced with a normal abacus type seal.
For liquid delivery
Material PFA/PTFE Shape Elbow Mass (g) 20 Applicable Pipe Outer Diameter (inch) 1/4 As ONE Part Number 61-3534-98 Screw size R1/8
L-shaped tube joint with male screw on one side. Since it is an F-lock seal, there is no need to worry about the tube coming off. It can also be replaced with a normal abacus type seal.
For liquid delivery
Material PFA/PTFE Shape Elbow Mass (g) 20 Applicable Pipe Outer Diameter (inch) 3/8 As ONE Part Number 61-3535-03 Screw size R3/8
It is an L-shaped joint. (Male screw x tube connection joint. The W ferrule type joint has a withstand voltage of up to 0.8Mpa at room temperature. It is designed to have low flow resistance so that the liquid can flow smoothly. As for the sealing method, the ferrule acts as a double seal by tigh... Read More
Material CTFE/PTFE、CTFE Mass (g) 40 Connector Thread 3/8 Screw size 3/8
L-shaped tube connection joint. The W ferrule type joint has a withstand voltage of up to 0.8Mpa at room temperature. It is designed to have low flow resistance so that the liquid can flow smoothly. As for the sealing method, the ferrule acts as a double seal by tightening the bag nut, resulting ... Read More
Material CTFE/PTFE、CTFE Mass (g) 40 Suitable Tube Outer Diameter (Φmm) 3 Orifice Diameter (Φmm) 1.5Φ
It has excellent heat resistance, non-adhesiveness, high electrical insulation, and slipperiness. Used for connecting fluororesin tubes. The F-lock seal can be used by grooving the outside of the tube with an optional grooving cutter. It can be firmly fixed without a grooving cutter, but the pres... Read More
Specification Applicable fluid: acid, alkali, etc.
It has excellent heat resistance, non-adhesiveness, high electrical insulation, and slipperiness. Used for connecting fluororesin tubes. The F-lock seal can be used by grooving the outside of the tube with an optional grooving cutter. It can be firmly fixed without a grooving cutter, but the pres... Read More
Compact and lightweight. Non-grease, steam can be used. Compliant with the Food Sanitation Law. The parts material has passed the equipment and container packaging standard test.
* Please check the compatible tube separately. * Since leakage is not zero, avoid using it in a vacuum holding such as... Read More
Suitable Fluid Air, water, steam Working Pressure Range -100MPa~1MPa Assured Pressure Resistance (MPa) 3.0 Ambient and Flowing Fluid Temperature (℃) -5 to 150 (without condensation) * 3
It is an L-shaped joint. (Male screw x tube connection joint. The W ferrule type joint has a withstand voltage of up to 0.8Mpa at room temperature. It is designed to have low flow resistance so that the liquid can flow smoothly. As for the sealing method, the ferrule acts as a double seal by tigh... Read More