Desiccators
Other Related Pages
- AS ONE Auto Dry DesiccatorEquipped with a dry unit of the solid polymer electrolyte membrane type, the humidity inside the refrigerator is continuously removed by electrolysis, so stable dehumidification is possible. The energy-saving design consumes 3 watts (about 440 yen / year), which is economical. Since the dehumidif... Read MoreMaterial (Main Unit) Transparent PMMA (acrylic resin) Type For low humidity Power Input (V) AC100 50/60Hz Power Consumption (W) 3W Power Cable Cord with 2P plug 2m Humidity setting range (% RH) ~25from ₱30,833.45Min. 2 days
- AS ONE Small Vacuum DesiccatorIt is a small and reasonable desiccator. A vacuum desiccator that is compact, lightweight, and convenient to carry. Supports decompression gas replacement. Can be stacked and used.Material (Main Unit) Transparent PMMA (acrylic resin) Material (Gasket) Silicon rubber Allowable vacuum (Pa) About 133from ₱11,097.41Min. 2 days
- AS ONE Mini Vacuum ContainerSince it comes with a small hand pump, you can easily build a vacuum environment indoors. No power supply is required, and it can be stored under reduced pressure after sampling in the field.Included Accessories vacuum gauge hand pump Allowable vacuum (Pa) About 133 Ultimate vacuum (MPa) 0.067 (gauge pressure) (using hand pump)from ₱12,330.91Min. 2 days
- AS ONE DesiccatorThe lid has a uniform shape due to molding and is extremely airtight. The shelves can be moved freely, and small to large ones can be easily inserted.Included Accessories 2 shelves, 1 silica gel dish Material (Main Unit) PMMA (acrylic) As ONE Part Number 1-007-01from ₱14,386.75Min. 2 days
- SANSYO Polycarbonate Desiccator Type 240The body and lid are made of hard-to-break polycarbonate. The mass is 1/3 lighter than the glass decigate. The joint between the lid and the main body is O-ring to maintain airtightness, so maintenance is not required with non-Vaseline. The needle valve type can be used for a wide range of purpos... Read MoreIncluded Accessories One middle plate Inner Diameter (Φmm) 239 Inner Plate Diameter (Φmm) 235 Lid Outer Diameter (Φmm) 296from ₱7,396.90Min. 6 days
- AS ONE Small Vacuum DesiccatorA vacuum desiccator that is compact, lightweight, and convenient to carry. Supports decompression gas replacement. The square type can be used by stacking.Type 135×60×200mm As ONE Part Number 2-4920-09from ₱28,366.45Min. 2 days
- AS ONE UV Auto Dry DesiccatorUsing the solid polymer electrolyte membrane, the humidity in the air inside the refrigerator is directly electrolyzed and continuously removed, so stable dehumidification can be performed. With a power consumption of 3 watts (about 440 yen / year), it can be economically used as a dehumidifying ... Read Morefrom ₱49,298.98Min. 14 days
- SANPLATEC Sanplatec (R) Dry Keeper A-TypeBy combining molded parts, both function and strength are further improved. The shelves can be adjusted in 8 steps at 28 mm intervals according to the size of the stored items. It is a horizontal design with a sense of stability. The door is a snap lock type and has good airtightness.Included Accessories Two shelves Material Polyvinyl chloride, ABS Power Consumption (W) About 5 Rated Voltage AC100V (50 / 60Hz common) Number of Shelves (pieces) 2 Material (Shelf) polystyrene Color (Body) Transparentfrom ₱18,087.26Min. 10 days
- Shinko Kasei DesiccatorThe shelf board can be changed up to 18 steps at a pitch of 25 mm. Comes with a hygrometer that allows you to check the internal humidity.Door type Clasp lock typefrom ₱20,554.26Min. 6 days
- Shinko Kasei V-45 vacuum desiccatorMaterial Clear acrylic Vacuum valve -0.1MPafrom ₱361,786.29Min. 44 days
- Shinko Kasei Desiccator H-4Number of Shelves (pieces) 6 Maximum Number of Stacking Can be expanded up to 14 steps Shelf board freelyfrom ₱2,672.18Min. 18 days
- SANSYO Upper mouth desiccatorThe upper part is a G-L32 screw cap, and a needle cock is attached to the perforated cap for suction. Made of highly durable first-class hard glass.from ₱10,275.08Min. 6 days
- Shinko Kasei V-3 vacuum desiccatorNot only can it be used as an ordinary desiccator, but it can also be used for vacuum, decompression, and gas replacement.Specification Number of vacuum gauges: 1 Number of Shelves (pieces) 2 Vacuum Gauge (MPa) -0.1 Applicable pump GVD-050A Dish shape Silica gel dish: 1 sheetfrom ₱164,425.89Min. 34 days
- Nakabayashi Capacity Dry BoxThe compact size allows you to make effective use of the vacant space. Can be stacked in the same size. DB-27L and DB-11L can be stacked. The storage state can be seen at a glance with a hygrometer. Firmly sealed with silicone rubber.Material (Main Unit) Polypropylene Material (Lid) High impact polystyrene resin Material (Gasket) Silicon rubber Material (Tray) PP (polypropylene) Material (Buckle) High impact polystyrene resin RoHS directive (corresponding to 10 substances) Correspondence
- SANPLATEC Vacuum Polycarbonate DesiccatorBoth the body and lid are transparent. You can instantly know the status of stored items and when replacing silica gel. It is a dry seal method using an O-ring. Eliminates the hassle of applying grease. It has the highest strength among transparent resins. It is hard to break even if dropped and ... Read MoreMaterial PC Material (Plate) Ceramic plate
- AS ONE DesiccatorOverwhelmingly popular! A classic desiccator. The shelves can be moved freely, and small to large ones can be easily inserted. The lid has a uniform shape due to molding and is extremely airtight.Included Accessories Shelf plate x 3, silica gel dish x 1 Material (Main Unit) Transparent PMMA (acrylic) Material (Rubber Feet) Natural rubber As ONE Part Number 1-001-01
- Nakabayashi CAPATI Dry Box (with Tray)The storage condition can be seen at a glance with a hygrometer. Silicone rubber is tightly sealed. Comes with a tray that is convenient for organizing small items. Can also store desiccantMaterial (Main Unit) Polypropylene Capacity (L) About 8 Material (Lid) High impact polystyrene resin Material (Gasket) Silicon rubber Material (Tray) PP (polypropylene) Material (Buckle) High impact polystyrene resin RoHS directive (corresponding to 10 substances) Correspondence
- Nakabayashi Capati DryBox SFoamed polyethylene and silicone rubber are used around the lid of the storage box to improve airtightness. A desiccant and a tightly sealed lid shut out moisture. Since it is a clear body that allows you to see the contents, you can see the dry state inside at a glance by setting the attached hy... Read MoreMaterial (Lid) Polypropylene Material (Main Unit) Polypropylene Capacity (L) About 20 Material (Gasket) Polyethylene foam
- AS ONE Cabinet DesiccatorIt can be stacked on top or connected sideways, and it will not tip over due to vibration or shift due to stacking. Because it is a molded product, the quality is uniform and durable.Material Tome Gold: Stainless Steel (SUS303) Color Smoke brown Material (Main Unit) AS (acrylonitrile styrene) resin Number of Shelves 4 Material (Shelf) PS (polystyrene) Material (Lid) AS (acrylonitrile styrene) resinfrom ₱7,396.90Min. 2 days
- AS ONE Valve Seat with Polycarbonate Screw O-RingAs ONE Part Number 62-2990-23from ₱986.39Min. 2 days
- Kato Sangyo Simple vacuum chamber (air fresh)The pressure can be reduced easily by using the vacuum pump provided with ●. ● Containers are highly airtight and can be kept under reduced pressure, which is effective in preventing oxidation of samples. ● Press the push button to intake air.
- SANPLATEC Polycarbonate Desiccator MiniIt is a mini type polycarbonate desiccator. It is a dry seal method using an O-ring. Eliminates the hassle of applying grease.Included Accessories PP plate Material Cover / transparent PC, base / white PP Material (Plate) PP Effective Bore Diameter (Φmm) 140from ₱6,985.74Min. 2 days
- AS ONE Vacuum Polycarbonate DesiccatorA lightweight and tough vacuum desiccator made of polycarbonate. The joints are precision molded (with O-rings) to maintain vacuum without grease. The porcelain plate is corrosion resistant and non-adhesive, and the reaction crucible can be placed on it as it is. * The total height of the model w... Read MoreIncluded Accessories 1 magnetic plate Outer Diameter (Φmm) Metal cock / 9 Allowable vacuum (Pa) Approx. 133 (1mmHg)
- AS ONE Molding Vacuum DesiccatorA new vacuum desiccator that is particular about ease of use. Since it has a lock, it is highly airtight at normal pressure and can be easily evacuated. The positions of the valve and vacuum gauge can be changed according to the application and space. By attaching a valve and vacuum gauge to the ... Read MoreAllowable vacuum (Pa) About 133from ₱10,275.08Min. 2 days
- SANPLATEC Dry Keeper Auto DesiccatorIt is fully automatic and does not require silica gel replacement. It keeps the humidity inside the refrigerator at 30-40% RH at room temperature and is ideal for long-term storage. By combining molded parts, both function and strength are further improved. Moisture-proof capacity has been greatl... Read MoreIncluded Accessories 3 pieces of patch and lock type shelves Material Polyvinyl chloride, ABS Type For moderate humidity Power Input (V) AC100V 50/60Hz Power Consumption (W) 9 Humidity setting range (% RH) 30~40
- AS ONE Molding Vacuum DesiccatorA tough vacuum desiccator that is integrally molded with polycarbonate. Highly airtight silicone packing is used for the seal part of the door and the main body, so there is no need for grease. Vacuum gauges and valves can be mounted on either the top or right side of the body. It is also possibl... Read MoreMaterial PC (manufactured by Polycard Nate) Allowable vacuum (Pa) About 133
- SANPLATEC Sanplatec (R) Mini Desiccator (Mini Desi)It is small and light, and is used regularly for shipping semiconductor parts and electronic parts, and for transportation within the company. Suitable for storing cameras and precision equipment parts in laboratories and laboratories. It can be stored in a locker or a shelf, and the workbench la... Read MoreIncluded Accessories Silica gel 50g (with container) Material Polystyrene, AS Color (Body) Transparent
- AS ONE Vacuum DesiccatorMaterial Valve / vacuum gauge mounting part: PC Capacity (L) 12 Number of Shelves 2 Allowable vacuum (Pa) About 133from ₱57,522.34Min. 2 days
- AS ONE Drying Glassware* We do not deliver to private homes (detached houses / apartments). * Use grease for sealing.Included Accessories Middle plate Material Soda-lime glassfrom ₱4,929.90Min. 2 days
- AS ONE Acrylic Small Vacuum ContainerAcrylic vacuum container with a removable top plate.Allowable vacuum (Pa) 1 Torr (about 133 Pa)
- AS ONE pasolina desiccatorThe one-touch open/close door allows for smooth storage and retrieval. Horizontal storage is also possible by adopting a flat door. The handle makes it easy to transport and move. * If you use the joint frame H type (2H type) sold separately, it is possible to stack it on top of the IW type and H... Read MoreMaterial (Main Unit) AS (Acrylonitrile Tylene) resin
- AS ONE DesiccatorEquipped with a dry unit of the solid polymer electrolyte membrane type, the humidity inside the refrigerator is continuously removed by electrolysis, so stable dehumidification is possible. The energy-saving design consumes 3 watts, which is economical. Since the dehumidifying unit does not have... Read MoreIncluded Accessories Two shelves Material (Main Unit) ABS resin molded product Power Input (V) AC100 50/60Hz Power Consumption (W) 3W As ONE Part Number 1-5489-11from ₱24,254.77Min. 2 days
- AS ONE dry boyMoisture inside the chamber is released directly in a gaseous state, so water droplets do not form. The included thermo-hygrometer is a low humidity digital (LHI-LPN). * We do not deliver to private homes (detached houses / apartments).Type For low humidity Power Input (V) AC100 50/60Hz Power Consumption (W) 3 Humidity setting range (% RH) ~25
- SANPLATEC I-Box (Non-auto Type)A non-automatic economy type desiccator with silica gel. It can be stacked and used as a storage box. The push-lock type handle is easy to use and easy to open and close with one hand.Included Accessories 2 shelves, hygrometer, silica gel Material (Body) ABS, (Door) ASfrom ₱7,396.90Min. 17 days
- SANPLATEC Option for vacuum polycarbonateThe nozzle diameter of the cock with cock is 9Φmm. The vacuum gauge of PC-250KG is 0 to -0.1MPa (minimum scale unit is 0.002MPa).Material PC Model Number 95001
- AS ONE Portable DesiccatorA portable size desiccator that can be carried as a carrying case. The auto-dry type dehumidification unit uses a solid polymer electrolyte membrane to directly electrolyze and remove the humidity inside the refrigerator. The gas replacement type has two valve mounting screws (gas replacement hol... Read MoreMaterial (Main Unit) Acrylic resin (PMMA) Material (Frame) Aluminum