Caps for Bottles / Containers

Mizuho Kasei Kogyo's inner stopper for wide-mouthed bottles.

● Modularized screw caps with 3 GL-14 screw caps added to the GL-45 standard screw caps. ● Screw cap bottles can be used for solvent (liquid / gas) containers and waste liquid containers for automatic analysis such as HPLC, GC, and titration. ● Since it can also be used for conventional screw cap... Read More

A highly chemical resistant PTFE connector cap for GL-45. It has 3 M-6 screw holes and can be used by penetrating a PTFE tube with an outer diameter of 3 mm or 1/8 inch. You can fix the tube. (When using optional ferrule & connector) Close unused holes with a seal stopper (sold separately).

Multi-bottle mini trigger Bottle is not included.

It has excellent heat resistance and cold resistance, and can withstand sterilization. For direct mouth

● A screw cap exclusively for screw cap bottles. ● The material and heat resistance vary depending on the color of the cap. ● Select GL32 to GLS80 according to the standard size of the screw cap. * Please refer to the specifications for chemical resistance and heat resistance.

Since it is a double stopper, it has a high degree of sealing in test tubes and is suitable for long-term storage of serum and a small amount of sample. For culture

Since the inside has a ring-shaped hook, the degree of sealing is high.

* Only the lid.

It can be steam sterilized by directly capping it in a test tube or culture bottle. There is a vertical stripe on the inside, so if you cover it loosely, it will become a ventilation plug, and if you push it strongly, it will become a closed plug. For culture

Aluminum cap for vial bottles. When you want to improve the airtightness.

A cap for narrow-mouthed standard bottles with a diameter of Φ12.8. With 4F high seat packing.

* A red cap, seal ring, and gasket are required when using at a heat resistance of 200 ° C.

● A cap with a two-stage nozzle with nozzle outer diameters of Φ9 and Φ12. -Can be used for GL-45 screw cap DURANR bottles. Tubes with inner diameters of Φ8 to Φ11 can be connected.

Suitable for GC autosampler (Shimadzu Corporation). The insert can handle small samples (250 μL, 150 μL).

It is designed to be smoothly attached to and detached from the test tube and can be used in the same way as the C cap. With a ring-shaped hook, it has a higher degree of sealing and is suitable for centrifuge pipes. For culture

● GL14 standard screw cap that can be attached to a few ports of the HPLC screw cap. -Used for fixing tubes, disc capsules, etc. when ventilating to the outside or sending liquid. -Use in combination with an insert dedicated to HPLC 2 and 3 ports.

● A modularized screw cap with two GL-14 screw caps added to the GL-45 standard screw cap. -Screw cap bottles can be used for solvent (liquid / gas) containers and waste liquid containers for automatic analysis such as HPLC, GC, and titration. -Since it can also be used for conventional screw cap... Read More

A transparent cup with a scale. (The lid is sold separately.)

It can be tightly sealed with an optional gasket (3-9184-02). * Gasket is not included.

A bottle cap for screw standard GL45 with a slightly angled connector on the top so that the tube can be easily attached and detached. During installation / removal, only the cap part can be turned while preventing the tube from twisting.

● A screw cap exclusively for screw cap bottles. ● The material and heat resistance vary depending on the color of the cap. ● Select GL32 to GLS80 according to the standard size of the screw cap. * Please refer to the specifications for chemical resistance and heat resistance.

Autoclave (121 ° C) possible.

A large container with a handle. A large-capacity cap that is convenient for refilling.