Interchangeable Ground Joint Glass Supplies
Common glazed glassware is a type of glassware that has a bonded surface that has been rubbed so that it can be used in combination with other parts. Glass instruments with sliding parts can be used for chemical experiments and development research because the instruments can be brought into close contact with each other. There are items that are convenient for connecting vacuum lines, such as flat stoppers, suction stoppers, and straight pipes that prevent solvent evaporation, so you should choose them according to your work. There are other common sliding thermometer adapters, so you can choose from a wide variety of products.
- SIBATA SCIENTIFIC TECHNOLOGY Common Mating Flat PlugIt is a glass stopper for the same common female shape. It is transparent.Color Transparentfrom ₱657.46Min. 2 days
- Tokyo Glass Kikai (TGK) Fine common stopperFine common mating glassware The joints are common mating. Since it complies with JIS standards, accurate experimental equipment can be assembled. For the common mating part, except for special ones, we have adopted the common 15/25 to the common 45/50.from ₱904.16Min. 2 days
- KENIS Joint clipMade of polyacetal, which is chemically and heat resistant, it fits without damaging the glass. It has a melting point of 170 ° C and does not rust or deform.Material Polyacetal Quantity 10from ₱1,890.96Min. 2 days
- SANSYO Common sliding exhaust pipe Curved pipeOffset Angle (°) About 90 suction hole outer diameter (mm) 8from ₱2,055.43Min. 6 days
- SIBATA SCIENTIFIC TECHNOLOGY Interchangeable Ground Joint Thermometer AdapterA PTFE adapter for connecting a commercially available rod-shaped thermometer to a fitting tube. Applicable to rod-shaped thermometers with an outer diameter of Φ6 to 7.2 mm.Material PTFEfrom ₱1,356.44Min. 2 days
- SANSYO Common sliding exhaust pipe Straight pipesuction hole outer diameter (mm) 8from ₱1,603.14Min. 6 days
- SIBATA SCIENTIFIC TECHNOLOGY SPC moisture meter with PTFE cockThis is a quantitative moisture receiver based on ASTM D95.Material Borosilicate glass Bottom (SPC) SPC-24 Upper Part (SPC) SPC-24from ₱22,198.93Min. 20 days
- SIBATA SCIENTIFIC TECHNOLOGY Common sliding gas blowing pipeSince the upper part has a rubber stopper with an outer diameter of Φ8 mm, it is a connecting pipe that allows gas to be blown from the outside. It can be used by connecting it to a flask with a female-shaped connection port of the same common ground joint standard.Rubber stop outer diameter (Φmm) 8from ₱3,206.70Min. 5 days
- AS ONE Ground Joint Ball Trap (For Rotary φ82mm)Material Borosilicate glass-1from ₱11,097.41Min. 15 days
- AS ONE Moisture Absorption Bottle (Sheffield Type)Material Borosilicate glass-1 Ground Joint 24/40 As ONE Part Number 1-4373-01from ₱11,097.41Min. 4 days
- Tokyo Glass Kikai (TGK) Fine common trap ball 93ΦThe joint part is a common mating. Since it complies with JIS standards, accurate experimental equipment can be assembled. For the common mating part, except for special ones, we have adopted the common 15/25 to the common 45/50.from ₱11,508.58Min. 18 days
- SIBATA SCIENTIFIC TECHNOLOGY SPC thermometer adapterA PTFE adapter for connecting a commercially available rod-shaped thermometer to a fitting tube. Applicable to rod-shaped thermometers with an outer diameter of Φ6 to 7.2 mm.Material PTFEfrom ₱1,356.44Min. 12 days
- SIBATA SCIENTIFIC TECHNOLOGY Common sliding exhaust pipe Curved pipe With glass cockAn L-shaped glass connecting tube with a Φ8 mm nozzle and a common mating standard connection port. Since it has a glass cock, it can be shut off from the outside.Material Borosilicate glass Offset Angle (°) 90 Suction Port Outer Diameter (Φmm) 8from ₱6,574.57Min. 5 days
- CLIMBING Common sliding ball stopperCan be used for common mating flasks.Specification Ordinary slide Material Borosilicate glass Standard Conforms to JIS R 3503from ₱698.57Min. 7 days
- CLIMBING Common sliding vacuum trapSpecification Ordinary slide Material Borosilicate glassfrom ₱11,508.58Min. 8 days
- SIBATA SCIENTIFIC TECHNOLOGY Common Mating Calcium Tubing BentIt is a calcium tube with an angle between the main body side and the connecting part that can be connected to the female shape of the common ground TS19 / 38 standard. A desiccant such as silica gel is put in the calcium tube and a rubber stopper is used.from ₱3,617.86Min. 5 days
- SIBATA SCIENTIFIC TECHNOLOGY Common sliding splitting tube VigreuxIt is a simple fractional distillation pipe that can obtain the fractional distillation effect by changing the angle and attaching a baffle plate to each part. Since the branch pipe connection is attached diagonally downward from the side of the fractional distillation pipe, it is easy to connect... Read MoreMaterial Borosilicate glass Type 180mm Dimension c (mm) 19 Upper sliding 15/25 Lower sliding 15/25from ₱9,452.74Min. 5 days
- Tokyo Glass Kikai (TGK) Fine transparent common suction plug Straight pipefrom ₱3,247.81Min. 18 days
- SIBATA SCIENTIFIC TECHNOLOGY Common sliding glass joint pipe female typeA common taper joint that connects glassware to each other. It can be connected to the male type of the same common ground joint TS glass joint tube standard. * Length includes ground joint.Material Borosilicate glassfrom ₱1,890.96Min. 5 days
- AS ONE Common Slide Calcium TubeSpecification U-shape with stopcock Material Borosilicate glass-1 Outer Diameter of Branch Pipe (Φmm) 8from ₱9,041.57Min. 12 days
- SANSYO SPC exhaust pipe Curved pipe 90 °SPC transparent joint glassware (1) Colorless and transparent, the inside can be clearly observed. (2) It has excellent alkali resistance without worrying about cementing. (3) It is hard to get dirty and easy to clean. (4) Can be used without grease. (5) High creep resistance. (6) Mechanically st... Read MoreType 90 ° curved tube Rubber stop outer diameter (Φmm) 8from ₱3,206.70Min. 6 days