Stirring / Pulverizing / Mixing Related Products
Stirring / pulverization / mixing refers to equipment, tools and accessories used for stirring solutions, crushing and mixing objects. In order to obtain the desired product, including preparation of reagents, chemical and medical research and educational institution experiments require work such as stirring and crushing. The magnetic stirrer can be used not only for stirring but also for maintaining a constant number of revolutions and heating. Stirring bars are made of orthodox glass, made of Duracon, which is highly resistant to chemicals, heat and oil, and disposable polystyrene. Various shapes of rotor (stirrer) can be selected.
Other Related Pages
- AS ONE Mini Test Tube MixerIt is an ultra-compact, variable rotation speed, 2-way power supply type authentic school. It is a compact type that fits in the palm of your hand and does not take up space. It can be used for mixing tubes and various test tubes. Touch start type and continuous operation mode can be selected. Yo... Read MoreMotor Output (W) About 0.6 As ONE Part Number 2-925-01from ₱11,097.41Min. 2 days
- AS ONE Pencil MixerThe powerful motor expands the work range. Samples can be easily homogenized using a 1.5 mL microtube. * Generator shaft for 1.5 ml microtube is not included.Shaft Diameter (Φmm) Shaft / 3, Tip / 8 Power Supply Uses two AA batteries As ONE Part Number 1-229-02
- Nissin Rika Cordless small shakerA small shaker that can be used with both AC / DC power supplies. The battery is 4 AA batteries and can be used for continuous operation in a day. It can also be used in a refrigerator or incubator at 37 ° C. The M101 and M201 plates are the size of a 150mm x 100mm microplate. The M301 is 150 mm ... Read Morefrom ₱39,467.97Min. 2 days
- Leona Stirring Impeller Disk TurbineIf it is a Φ8mm shaft, it can be fixed at any position and used.from ₱361.42Min. 6 days
- IKA Small magnet stirrerA small palm-sized stirrer. ● Uses a brushless motor and has a long life.Motor DC brushless motor
- SIBATA SCIENTIFIC TECHNOLOGY Stirring Blade Set for M Type・It is an optional replacement blade for the propeller type dedicated to the stirrer M series.・If it is a Φ8mm shaft, it can be fixed at any position and used.・It is used for stirring general-purpose liquids. - Since it has a boss, it can be fixed at any position on the stirring bar with a set... Read Morefrom ₱1,603.14Min. 34 days
- DLAB Magnetic Stirrer MS-P SeriesThe top plate is made of nylon and glass fiber with excellent chemical resistance. IP42 dustproof and waterproof structure. It has excellent durability due to the adoption of a brushless motor.Included Accessories Rotor (Φ8 x 50mm) x 1 Capacity (L) Stirring: 3 Power Input (V) AC100~240(50/60Hz) Motor Brushless motor Material (Plate) Nylon + glass fiber Dust / Water Protection IP42 Plate dimensions (Φmm) Φ135from ₱14,797.92Min. 14 days
- DLAB Tube RotatorThere are 3 sizes of holders that can be used for many purposes.from ₱36,178.63Min. 4 days
- SMT Process homogenizerIt is a popular device that realizes a low price while having a full range of functions such as a timer. The material of the wetted parts is SUS304, and the cutter can be easily attached and detached, so sterilization can be performed easily.Rotational Speed (min -1 [rpm]) MAX18000 Power Supply AC100V 50/60Hz 3A Type of Control Thyristor control method Motor (W) 100 timer 15 minutes and continuousfrom ₱123,309.14Min. 9 days
- FLON INDUSTRY PEEK screw parts for PTFE jet type stirring bladesType F-4105-06 Rod Diameter (mm) For 8from ₱7,396.90Min. 7 days
- Sieve Factory Iida Test Sieve SUS Spread Type Φ100mm Depth 43mmInner Diameter (Φmm) 100from ₱5,341.07Min. 20 days
- AS ONE Stainless pot mill with vacuum valveThe gas in the pot can be replaced! With silicone rubber packingMaterial Stainless steelfrom ₱24,665.94Min. 4 days
- IKA Lab DancerMinimum design test tube shaker. Start with touch start (automatic start by pressing the touch part with a test tube and applying a load). The perfect smart design for the lab. For test tubes up to 30 mm in diameter, other centrifugal tubes, and Eppendorf tubes. Fixed type with a rotation speed o... Read MoreRotational Speed (min -1 [rpm]) 2800 (fixed) Power Supply AC100V 50/60Hz Protection Class IP40(DIN EN 60529) Motor Output (W) 0.8 Allowable Ambient Temperature (℃) 5~40 Motor input (W) 1.2 Allowable humidity (%) (Around) 80 Swinging form rotary allowable swing amount 50 mL maximum (per test tube)from ₱20,554.26Min. 4 days
- AS ONE Stainless Steel Mill JarWith silicone rubber packingType 3000mL As ONE Part Number 1-3951-03from ₱27,544.11Min. 4 days
- CC Mark (Nikkato) Alumina balls HD seriesHas excellent wear resistance.Type Cylinder shape HD-127 Material Alumina Chemical Composition Al2O3/93%、SiO2/5% Fracture Toughness 3.7MPa√m Density 3.6g/mL As ONE Part Number 61-0161-77 Spiral wear rate (ppm / h) 180from ₱1,644.26Min. 6 days
- AS ONE Bead CrusherPower Supply AC100V 50/60Hz Model Number BM-1S Display Format Digital As ONE Part Number 1-2958-01from ₱102,750.76Min. 14 days
- Sieve Factory Iida Test Sieve SUS Separate Type Optional Product for Φ500mmMaterial Stainless steel (SUS304)from ₱13,564.42Min. 96 days
- SANSYO Heavy-Duty orbital shakerMaximum allowable weight 16 kg. With abundant options sold separately, it can be used for various purposes. Stable shaking is possible by microprocessor control. The speed and timer can be set in 1 to 10 steps with the adjustment dial. Can be used in an incubator, in a refrigerator, or in a CO 2 ... Read MoreType analog Power Input (V) AC100(50/60Hz) Motor DC brushless motor Speed 25~500rpm timer 1 to 120 minutesfrom ₱160,314.21Min. 9 days
- KENIS Small stirrerThe exterior is made of glass fiber reinforced engineering plastic (GF-PBT), which has excellent heat resistance and chemical resistance.Included Accessories 1 stir bar and 1 non-slip mat Power Supply AC100V・0.3Afrom ₱12,330.91Min. 3 days
- Tokyo Glass Kikai (TGK) Stirring blade tip propeller R Made of SUS316For the tip, it can be fixed to the tip of the shaft with the nut attached to the stirring shaft. With a boss, it can be fixed to any position on the stirring shaft with the set screw on the boss. It can also be used in multiple stages.Product Name Propeller Rfrom ₱402.53Min. 7 days
- AS ONE Big Rotor with Inspection Inspection Before ShippingThe rotating roller causes a seesaw motion to mix. The roller spacing can be changed depending on the mixing container. It has a variable rotation speed function and can be used at the desired rotation speed. You can mix containers up to 2L. * An inspection inspection report is attached at the ti... Read MoreIncluded Accessories Inspection inspection documents Power Supply AC100V 50/60Hz 1A Motor Induction motor As ONE Part Number 1-5174-01-22 timer Half an hourfrom ₱164,425.89Min. 133 days
- SANSYO Hot plate stirrerStir at high temperature to increase the solubility of the sample. High torque stirring is possible with the induction motor. With a temperature controller, adjust the heating plate to the required temperature and stir and mix.Included Accessories One 30 mm stir bar Rotational Speed (min -1 [rpm]) About 150-1300 Power Supply AC100V 50/60Hz 4A Motor induction motor Heater 350W MAX.270℃(at 25℃) Temperature Control Phase control methodfrom ₱49,298.98Min. 6 days
- scinics Shaking mixerThe tilt angle and speed can be adjusted while shaking, and diagonal shaking by seesaw movement facilitates efficient mixing. A tapper container or culture flask can be placed on the surface of the shaking plate as it is. If you use an optional holder, you can hang a micro tube or a centrifuge tube.Power Supply AC100V 50/60Hz 0.04A Motor DC motor timer 0-60 minutes or continuous Shaking speed (min -1 [rpm]) 20-85 (continuously variable)from ₱82,192.39Min. 6 days
- sanpo Stainless Steel Sieve 200Φ x 60ISO3301-1 / JIS Z-8801 Material: Wire mesh / 125mm-150μm ... Stainless steel (SUS304), 125-20μm ... Stainless steel (SUS316), Frame / Stainless steel (SUS304) * There is no taper on the frame / mesh part.Inner Diameter (Φmm) 200 Standard ISO3301-1/ JIS Z-8801 Frame Size Φ200×60mm Material (Frame) SUS304
- AS ONE Stirring Bar (Value Set)It is a value set born from the voice that 11 is too much and 1 is too few.Material PTFE (fluororesin) Shape Tapered type
- CC Mark (Nikkato) Alumina BallsIt has excellent wear resistance and durability, and is suitable for various crushing and dispersing balls such as natural raw materials, alumina, substrates for electronic components, and sealing materials. General-purpose grade type.Hardness HV:9.8GPa(1000kgf/mm2) HRA:87 Hardness (Hv) 1100 Fracture Toughness 3.7MPa√m Density (g/cm3) 3.6 Spiral wear rate (ppm / h) 180
- sanpo Stainless Steel Sieve 300mm × 100ISO3301-1 / JIS Z-8801 Material: Wire mesh / 125mm-150μm ... Stainless steel (SUS304), 125-20μm ... Stainless steel (SUS316), Frame / Stainless steel (SUS304) * There is no taper on the frame / mesh part.Inner Diameter (Φmm) 300 Standard ISO3301-1/ JIS Z-8801 Frame Size Φ300×100mm Material (Frame) SUS304
- sanpo Stainless Steel Sieve 75mm × 20ISO3301-1 / JIS Z-8801 Material: Wire mesh / 125mm-150μm ... Stainless steel (SUS304), 125-20μm ... Stainless steel (SUS316), Frame / Stainless steel (SUS304) * There is no taper on the frame / mesh part.Inner Diameter (Φmm) 75 Standard ISO3301-1/ JIS Z-8801 Frame Size Φ75×20mm Material (Frame) SUS304
- AS ONE Stainless Stirring RodMaterial Stainless steel (SUS304) Diameter (Φmm) 5 As ONE Part Number 1-6424-01
- AS ONE Stirring Rod (Duracon)It has excellent thermal stability, chemical resistance, and oil resistance.Material POM (Duracon (R))
- Tokyo Screen Test Sieve ST Made (Plain Weave) 200Φ × 60DIt is a basic weave with alternating vertical and horizontal lines, and is most commonly used because of its stable mesh for accurate and efficient sieving.Remark Plain weave
- AS ONE Glass Bead* Product colors may vary depending on the production lot and shooting conditions.Material Soda-lime glass Specific Gravity 2.5
- OHTSUKA BRUSH MFG. Stainless Steel SieveMaterial Frame / SUS430, Net / SUS304
Filter by categories