Hull Fittings

Bearing sheaves produce smooth rotation. The bolt end face of the sheave pin is firmly fixed by caulking. In addition, the swivel is forged to increase strength and safety. * Two bearings made of iron (with rubber seal) are used. * The working load is based on the working load of the bearing.

Welding type For fixing structures such as rope terminals and shackles, or for hanging hands when hanging as hanging pieces

A hitch ball made of steel (chrome plating) with a ball diameter of 2 inches.

JIS F3410-1999 C type. Welded mounting type. It can be used as a hanging strap by attaching it to a structure as a hanging piece. For fixing structures such as rope terminals, shackles, and pulleys, or for hanging straps when hanging as hanging pieces. * Please firmly weld.

The parasol struts are made of lightweight aluminum! The frame uses sturdy glass fiber! The inside of the parasol is UV coated in black, making it a fishing parasol that blocks UV rays. * The parasol stand is a product that is premised on "use in no wind to light wind". If you receive a... Read More

The air damper reduces vibration! The seat absorbs shocks, which greatly improves the seating comfort! The air damper specifications allow stepless adjustment. You can rotate 360 degrees by loosening the knob. It can be attached to all BMO seats.

You can easily "install / remove" the seat! A pair of "separate type" swivel bases that are used by attaching bases to the seat side and boat side respectively. If you attach the base to the seat and the boat respectively first, then you can easily attach and detach the seat d... Read More

Stainless steel is used for the screw and shaft of the plastic body Rope hoisting on board and in coastal areas (for fishing), etc.

A swivel base used for casting sheets and folding sheets. We offer three types: lightweight aluminum, sturdy stainless steel, and inexpensive steel.

A cushion that can be attached to a cooler box, docut, or other tool box.

Lightweight and compact type ideal for small boats! Both the back and seat surface are designed to be small, but by widening the width, you can sit comfortably and realize a compact yet comfortable seating comfort. Therefore, it is ideal for inflatable boats and 2-horsepower boats.

It is a new product intercom marine low back folding sheet that pursues the best cost performance. Folding, the seat is lightly bucketed so that the cushion on the buttock fits the body, and the center part is slightly recessed. The material is marine grade vinyl, and the metal fittings are made ... Read More

Aluminum and stainless steel seat mount base

After-parts for Bimini top For Φ25mm

A ship eye plate that can be used to fix structures such as rope terminals, shackles, and pulleys. F type.

A must-have item for storage that protects the sheet from darkening !! A polyester fabric seat cover compatible with BMO JAPAN seats.

Excellent seat and back made of thick cushion! Rugged aluminum hinges and rust-proof plastic inner frame

A ship eye plate that can be used to fix structures such as rope terminals, shackles, and pulleys. C type. JIS F 3410-1995

A large seat that allows you to sit comfortably, which is ideal when the boat has space. The UV-resistant polymer sheet contains a solid and thick sponge, which provides high cushioning and allows you to experience a comfortable sitting experience.

Steel and stainless steel swivel seat mounts.

After-parts for T-top lights and deck tops

A new product, Intercom Marine's low back folding sheet, which pursues the best cost performance. Folding, the seat is lightly bucket-shaped so that the cushion on the buttock fits the body, and the central part is slightly recessed. The material is marine grade vinyl, and the metal fittings ... Read More

Spare parts for T-tops and deck tops * This is a spare part for T-tops and deck tops, so it is not compatible with other uses.

A casting sheet that uses durable plastic for the inner frame. It is possible to choose from 4 types of color variations according to the taste and color of the bus boat.

Spare parts for Bimini top * Since it is a spare part for the Bimini top, it is not compatible with other uses. * Cannot be used for bimini tops for sailboats.

A seat pedestal whose height can be adjusted steplessly by simply loosening the dial screw.

Installation is completed simply by placing the cooler box on the tray! It is a parasol stand that is used by placing the cooler box on the tray part. No troublesome installation work is required. Fix the parasol with the weight of the cooler. The tray and parasol stand are removable. * This prod... Read More

A sports bucket seat for the helm station. The seat material is leather type heavy duty marine grade vinyl and the inner uses overpush foam pad. The bucket seat is carefully finished and sewn to hold your body firmly.

Spare parts for T-tops and deck tops * This is a spare part for T-tops and deck tops, so it is not compatible with other uses.

A deck chair developed for use on marine boat decks. A 25mm aluminum frame is used for the strut part. The heavy synthetic leather cushion and the side elbow pad are 65 mm long, which gently supports the body. A luxurious deck chair used in Western luxury yachts and boats. It is the best item to ... Read More

Easy adjustment of the front and rear position of the seat! This is an optional part exclusively for the seat pedestal. Use this when you want to slide the seat back and forth. You can slide it back and forth by releasing the lever lock.

It is a shaft that serves as a support when attaching a casting seat, backless, chair, etc. to a bus boat.

After-parts for Bimini top

In the United States, the entire seat surface of the boat seat, which is a very popular new product that is often used for open boats, is uplifted, so you can stand and sit when you stand and maneuver. A backrest reversing type helm sheet with an armrest.

Backrest that does not get tired even when maneuvering for a long time The backrest is aligned with the S-shaped line of the spine. Therefore, it is a seat suitable for the structure of the human body that does not get tired even when maneuvering for a long time.

After-parts for Bimini top For Φ25mm

The height can be adjusted widely from 40 cm to 58 cm, and the adjustment pitch can be adjusted in 9 steps at 2.5 cm intervals, so the height can be adjusted exactly according to the application and taste.

AK block PB type using a sheave with stainless steel bearings. The sheave is inside the main body, and the rope is designed to be hard to narrow. The bolts used for the swivel connection are one size thicker than the manufacturer's conventional blocks, and strength is also taken into consider... Read More