All Category

Fuses & Wiring for Boats

View : Grid List
Filter

Items 1 - 40 of 45

Set Ascending Direction
  1. Wiring coupler
    BMO Japan Wiring coupler
    7-pin type trailer side wiring coupler. Please use it when replacing due to aged deterioration such as wear and rust. * Wiring work is required, so please handle with care.
    Number of Pins 
    Rating:
    40%
    from ₱2,055.43
    Min. 2 days
  2. Wiring socket
    BMO Japan Wiring socket
    7-pin type wiring socket. Rubber wiring cover boots are attached to the back of the socket body. * Wiring work is required, so please handle with care.
    Number of Pins 
    from ₱1,767.61
    Min. 2 days
  3. Fuse holder
    ONEGAIN Fuse holder
    Designed for excellent safety. The surface treatment method for the terminal fixing bolt is a 14mm spanner tightening type for fixing the gold-plated fuse, which has excellent electrical conductivity, low contact resistance, and heat dissipation. Compatible with ANL fuses 35A to 500A. For safe us... Read More
    Set Contents  1 set (2 pieces) 
    from ₱4,929.90
    Min. 2 days
  4. Circuit breaker
    BMO Japan Circuit breaker
    It is a circuit breaker installed between wirings. Since it comes with a direct battery stay, it can be directly connected to the screw terminal of the battery. * It is not waterproof.
    Rated Current (A)  50  Included Accessories  cap  Rated Voltage (V)  DC12/24 
    Rating:
    100%
    from ₱945.27
    Min. 2 days
  5. Wiring kit
    BMO Japan Wiring kit
    A set of 7-pin type wiring socket and wiring (1.5m). Rubber wiring cover boots are attached to the back of the socket body, and 6 pressure terminals required for wiring are also attached. * Wiring work is required, so please handle with care.
    Cable Length (m)  1.5  Number of Pins  Included Accessories  Crimp terminal x 6 
    from ₱3,576.75
    Min. 2 days
  6. fuse
    ONEGAIN fuse
    Prevents overcurrent to the inverter. It can also be used as a fuse for car audio. High-grade materials are used to improve conductivity. The quality control is very good and the durability is excellent. Compatible with fuse holder FH-G (sold separately). * If the inverter is overloaded, there is... Read More
    Operating Temperature Range (℃)  -20~125  Operating Voltage Range (V)  DC80 
    Rating:
    60%
    from ₱3,288.93
    Min. 7 days
  7. Obi (band hoop)
    Nomura Obi (band hoop)
    Used in combination with a buckle with a band (hoop material) for tying electric wires on ships. Attach the band buckle and tie the wire and support together. * Be careful not to get injured because the tip and others are sharp.
    Length L (m)  30  Board width (mm)  B:14 
    from ₱492.99
    Min. 2 days
  8. Band buckle
    Nomura Band buckle
    It is a buckle for tying electric wires of ships and is used together with a band metal (hoop material). Attach it to the band hoop and tie the wire and support material together. * Be careful not to get injured because the tip and others are sharp.
    Thickness t (mm)  Buckle: 1 
    from ₱616.34
    Min. 2 days
  9. Hoop with band buckle (for branch circuit)
    Nomura Hoop with band buckle (for branch circuit)
    It is a wire lashing material for ships and is mainly used for branch lines. Since the buckle and band (hoop) are integrated, the wire and support material can be fixed as they are. * Be careful not to get injured because the tip and others are sharp.
    Thickness t (mm)  Buckle: 1, Belt: 0.3  Board width (mm)  B:14  Type  D type 
    from ₱739.69
    Min. 2 days
  10. Cable bushing with nut
    Nomura Cable bushing with nut
    It is used when making holes in the inner wall of the living quarters of a ship and passing electric wires through it. Can be used up to a wall thickness of about 25 mm
    Material  Synthetic resin 
    from ₱221.62
    Min. 12 days
  11. Cracked packing
    Nomura Cracked packing
    Mainly used as a waterproof packing for ship JIS F 8802 S-type and D-type electric wire penetrating hardware. Since it has a diagonal cut, it can be installed later. After construction, please waterproof it with putty etc. * Please avoid storing at high temperature.
    Material  Synthetic rubber 
    from ₱151.72
    Min. 12 days
  12. TRH hanger
    Nomura TRH hanger
    It is used as an electric wire material for ship electric wires. It is an electric circuit material that selects two types of length legs, bends them 90 degrees, and welds them to the hull. * Be careful not to get injured because the tip and others are sharp.
    Thickness t (mm)  2.3  Material  Iron  Surface Treatment  Plating 
    from ₱279.18
    Min. 12 days
  13. Hanger for electric circuit + bolt tightening type
    Nomura Hanger for electric circuit + bolt tightening type
    It is a cable rack part that supports electric wires. It is a bolt-tightened type electric wire hanger. Use a lashing product (sold separately) to fix the wire in the lashing hole. * Be careful not to get injured as there are sharp points.
    Bolt Hole Diameter (Φmm)  Surface Treatment  Electroplating  Material  Iron 
    from ₱328.52
    Min. 12 days
  14. Hanger for electric circuit + welding type
    Nomura Hanger for electric circuit + welding type
    It is a cable rack part that supports electric wires. It is a welding type electric wire hanger. Fix the wire using a lashing product (sold separately) with a lashing notch. * Be careful not to get injured as there are sharp points.
    Thickness t (mm)  2.3  Type  CB  Surface Treatment  Electroplating  Material  Iron 
    from ₱164.06
    Min. 12 days
  15. AGU glass tube fuse
    MARINTEC AGU glass tube fuse
    DC overcurrent protection AGU fuse! Essential item for car audio, boats, campers, etc. DC 12V, 24V, 36V, 48V DC gold-plated large glass tube fuse
    from ₱279.18
    Min. 7 days
  16. mega fuse holder
    MARINTEC mega fuse holder
    High breaking performance, high-quality ceramic type Fuse body is made of flame-retardant Bakelite resin with excellent insulation DC 12V/24V/36V/48V DC cable connection: Crimp terminal connection type Fuse with a maximum capacity of 400A with a nylon nut that is resistant to vibration and does n... Read More
    Bolt dimensions  (optimal terminal) M8 mm (R terminal)  Voltage (V)  12/24/36/48  Fuse Capacity (A)  50/80/100/125/150/200/250/300/400  Dimension (mm)  65×43×24 
    from ₱2,384.36
    Min. 7 days
  17. MIDI fuse holder
    MARINTEC MIDI fuse holder
    Holder with MIDI fuse for DC overcurrent protection! Essential item for inverters, car audio, winches, thrusters and windlasses! Larger current capacity type than MD-1! Brass block type transparent heat resistant protective acrylic housing DC12V/24V/ Cable connection for 36V/48V DC: Sandwich conn... Read More
    Voltage (V)  12/24/36/48  Mass (g)  70  Dimension (mm)  83×33×28  Included Accessories  Cover, MIDI fuse (100A) 
    from ₱986.39
    Min. 7 days
  18. ANL Fuse
    MARINTEC ANL Fuse
    Overcurrent protection fuse for DC. An essential item for large-capacity inverters, car audios, winches, thrusters, and windlass!
    Overall Length (mm)  80  Type  Fuse only 
    from ₱780.81
    Min. 7 days
  19. Cohesion driver
    Nomura Cohesion driver
    It is a special tool for tightening electric wire lashing products of ships. NTD 5 pieces Can also be used as a hand-wound tool for ball-locking stainless steel bands Band buckle BB-RB dedicated lashing driver
    Type  For type D  Color  Green  Material  Handle part PVC  Surface Treatment  Plating 
    from ₱7,808.07
    Min. 12 days
  20. Band hoop
    Nomura Band hoop
    Used in combination with a buckle with a band (hoop material) for tying electric wires of ships. BH041430 10 rolls included Attach the band buckle and tie the wire and support together. * Be careful not to get injured because the tip and others are sharp.
    Thickness t (mm)  Band: 0.4  Type  D type  Material  Iron  Board width (mm)  Obikane: 14  Length (mm)  Obikane: 30  Surface Treatment  Plating 
    from ₱4,929.90
    Min. 12 days
  21. Fuse Box 12 Circuits
    MARINTEC Fuse Box 12 Circuits
    A fuse box with a flat fuse. For 12-24V With LED indicator (Red LED lamp lights up when the fuse blows.) For 12 circuits (with spare fuse)
    Voltage (V)  12/24  Size  138×85×36 
    from ₱3,206.70
    Min. 2 days
  22. DC Circuit Breaker Reset Switch CBM
    MARINTEC DC Circuit Breaker Reset Switch CBM
    It is a thermal circuit breaker for DC circuit only! When the current reaches the specified value, the circuit is automatically cut off and protected! Ships, automobiles, and other 12V / 24V DC power supply dedicated types ON-OFF Push-type manual Reset is restored by pressing the reset button. I... Read More
    Voltage (V)  12~24  Size  14×29×47  Current Capacity (A)  Choose from 5, 15 and 20  Connector  Soldering 
    from ₱657.46
    Min. 2 days
  23. DC Circuit Breaker Reset Switch
    MARINTEC DC Circuit Breaker Reset Switch
    DC circuit dedicated circuit breaker! When the current reaches the specified value, the circuit is automatically cut off and protected! 12V-60V DC power supply dedicated type ON-OFF manual reset for ships and automobiles, etc. Press the red button to break it. (Trip) and return the lever to retur... Read More
    Applicable bolt size  M6mm x 2 (R terminal) 
    Rating:
    100%
    from ₱1,233.09
    Min. 2 days
  24. Hoop with band buckle (for main circuit)
    Nomura Hoop with band buckle (for main circuit)
    It is a wire lashing material for ships and is mainly used for main electric wires. Since the buckle and band (hoop) are integrated, the wire and support material can be fixed as they are. * Be careful not to get injured because the tip and others are sharp.
    Length L (m)  0.5  Thickness t (mm)  Buckle: 1, Belt: 0.4  Board width (mm)  B:14  Type  Claw type No.3 
    from ₱780.81
    Min. 12 days
  25. ANL Fuse
    MARINTEC ANL Fuse
    Overcurrent protection fuse for DC. An essential item for large capacity inverters, car audios, winches, thrusters, and windlass! High quality ceramic type fuse 12V-24V-36V-48V For direct current
    from ₱657.46
    Min. 6 days
  26. Fuse Holder
    MARINTEC Fuse Holder
    MIDI fuse for overcurrent protection for DC. An essential item for inverters, car audios, winches, thrusters, and windlass! 12-24V-48V DC cable connection: With sandwich connection type fuse * Specifications and appearance are subject to change without notice for improvement.
    Voltage (V)  12/24/48  Size  72×24  Included Accessories  cover 
    Rating:
    20%
    from ₱1,068.62
    Min. 7 days
  27. Hoop with band buckle
    Nomura Hoop with band buckle
    It is a wire lashing material for ships and is mainly used for branch lines. Since the buckle and band (hoop) are integrated, the electric wire and support material can be tied together as they are. * Be careful not to get injured because the tip and others are sharp.
    Thickness t (mm)  0.3, buckle: 1  Length (mm)  Band: 0.15  Type  D type  Material  Iron  Board width (mm)  Obikane: 14  Surface Treatment  Plating 
    from ₱6,574.57
    Min. 12 days
  28. MIDI Fuse
    MARINTEC MIDI Fuse
    MIDI fuse for overcurrent protection for DC! An essential item for inverters, car audios, winches, thrusters, and windlass! DC12V, 24V, 36, 48V For DC
    from ₱254.51
    Min. 2 days
  29. waterproof fuse box
    MARINTEC waterproof fuse box
    Waterproof type now available! Fuse box with flat fuse for 12/24V The body is made of PBT resin with excellent insulation, heat resistance, and flame resistance. The transparent PC cover is equipped with knob bolts. Equipped! Ideal for boats, automobiles, yachts, campers, etc.! For 6 circuits / w... Read More
    Voltage (V)  12/24 
    from ₱2,055.43
    Min. 7 days
  30. MIDI fuse holder
    MARINTEC MIDI fuse holder
    Holder with MIDI double fuse for DC overcurrent protection! Essential item for inverters, car audio, winches, thrusters, and windlasses! Heavy pedestal block supports large capacity! Large current block type 1IN-2OUT double fuse DC12V・Cable connection for 24V/36V/48V DC: Sandwich connection type... Read More
    Voltage (V)  12/24/36/48  Mass (g)  200  Dimension (mm)  94×42×31  Included Accessories  Cover, 2 MIDI fuses (60A) 
    from ₱2,631.06
    Min. 7 days
  31. DC cable
    MARINTEC DC cable
    Waterproof DC connector cable! Can be used outdoors Cap tire type cable Equivalent to 0.3 sq Waterproof IP-65 equivalent Standard plug (outer diameter 5.5 mm x inner diameter 2.1 mm) Can be used with loads up to 7A *Manufacturer's double and triple tape Male and female plug set product up to ... Read More
    Outer Dia. x Inner Dia. (Φmm)  (Standard product plug) 5.5 x 2.1  Cable Length (cm)  22 
    from ₱287.41
    Min. 7 days
  32. Fuse Box 6 Circuits
    MARINTEC Fuse Box 6 Circuits
    A fuse box with a flat fuse. For 12-24V For 6 circuits (with spare fuse) * Specifications and appearance are subject to change without notice for improvement.
    Voltage (V)  12/24  Dimension (mm)  88×36×85 
    Rating:
    100%
    from ₱1,973.19
    Min. 2 days
  33. Cohesion driver bit
    Nomura Cohesion driver bit
    It is a special tool for tightening electric wire lashing products of ships. BIT 5 pieces Can also be used as a hand-wound tool for ball-locking stainless steel bands Band buckle BB-RB dedicated bit for electric screwdriver * Please check the insertion part of the power tool you are using.
    Material  Chrome molybdenum steel  Type  For type D  Surface Treatment  Plating 
    from ₱5,752.23
    Min. 12 days
  34. MIDI fuse holder
    MARINTEC MIDI fuse holder
    DC overcurrent protection MIDI fuse holder! A must-have item for inverters, car audio systems, winches, thrusters, and windlasses! Compatible with maximum capacity fuses. Fuse holder with large block. Brass block type transparent heat-resistant acrylic housing. A large fuse can be used DC12V, 24V... Read More
    Voltage (V)  12/24/36/48  Dimension (mm)  50×40×30  Mass (g)  90 
    from ₱2,384.36
    Min. 7 days
  35. mega fuse holder
    MARINTEC mega fuse holder
    Holder with ANL fuse for overcurrent protection for DC Compatible with ANL fuse for large current Main body is made of flame-retardant Bakelite resin with excellent insulation Brass block base Specifications 12V/24V/36V/48V DC with 100A fuse for direct current Cable connection: Sandwich Connectab... Read More
    Dimension (mm)  108×71×40  Voltage (V)  12/24/36/48  Hole Diameter (mm)  13, adapter 8.5  Mass (g)  260  Included Accessories  ANL Fuse 100A  Cable  Maximum AWG4/0・107SQ  Connector  sandwich type 
    from ₱2,877.76
    Min. 7 days
  36. Band hoop For securing non-exterior electric wires
    Nomura Band hoop For securing non-exterior electric wires
    Used in combination with a buckle with a band (hoop material) for tying electric wires of ships. Used for tying non-exterior electric wires. Attach the band buckle and tie the wire and support together. * Be careful not to get injured because the tip and others are sharp.
    Thickness t (mm)  0.4  Length L (m)  20  Board width (mm)  B:14  Type  For claw type 2 and claw type 3  Insulation  PVC coating 
    from ₱1,562.03
    Min. 12 days
  37. Hoop with band buckle (for securing main and non-exterior wires)
    Nomura Hoop with band buckle (for securing main and non-exterior wires)
    It is used mainly for tying electric wires of ships and mainly for main electric wires. It is mainly used for tying non-exterior electric wires. Since the buckle and band (hoop) are integrated, the wire and support material can be fixed as they are. * Be careful not to get injured because the tip... Read More
    Length L (m)  0.3  Thickness t (mm)  Buckle: 1, Belt: 0.4  Board width (mm)  B:14  Type  Nail type 2  Insulation  PVC coating 
    from ₱3,083.35
    Min. 12 days
  38. MIDI Fuse Holder
    MARINTEC MIDI Fuse Holder
    Reliable waterproof type! Recommended for places with high humidity, ships, automobiles, etc.! Box with MIDI fuse for overcurrent protection for DC! With 4 rubber packings and silicone cable packing, it is an indispensable item for inverters, car audios, winches, thrusters, and windlass. With fuse.
    Voltage (V)  12/24/36/48 (for direct current)  Size  72×24  Way of Cable Connection  Sandwich connection type  Waterproof  Waterproof type 
    Rating:
    100%
    from ₱986.39
    Min. 7 days
  39. Band buckle
    Nomura Band buckle
    It is a buckle for tying electric wires of ships and is used together with a band metal (hoop material). Attach it to the band hoop and tie the wire and support material together. * Be careful not to get injured because the tip and others are sharp.
    Thickness t (mm)  Buckle: 1  Type  D type  Material  Iron  Surface Treatment  Plating 
    from ₱2,877.76
    Min. 12 days
  40. Circuit breaker
    MARINTEC Circuit breaker
    Circuit breaker for DC circuits! Evolution of the CB1 type breaker. Comes with a safe large block type terminal block! About twice the weight! Sturdy built breaker ON-OFF type for 12V to 60V DC power supplies such as ships and automobiles /Manual reset When the red button is pressed, it shuts off... Read More
    Cable  (Maximum) 95SQ・AWG4/0  Voltage (V)  12~60  Mass (g)  200  Dimension (mm)  69×84×41 
    from ₱2,343.24
    Min. 7 days
View : Grid List
Filter

Items 1 - 40 of 45

Set Ascending Direction