Pressure Washer Accessories
Accessories for high-pressure washing machines are parts made for high-pressure washing machines that remove dirt on walls, floors, cars, etc. with high water pressure. Major high pressure washer accessories include body side coupling, one-touch joint, hose connector with packing, and high pressure hose. Since it is necessary to change the water pressure and jet type depending on the application and location such as use in general households and construction sites, it is necessary to consider the necessary parts such as hose, gun, nozzle etc. that match the pressure of the high pressure washer at the time of purchase There is a product.
Other Related Pages
Chubu High-Pressure Hose High pressure washer hose for coupler mounting (3/8 male on both ends)Wire reinforcement Commercial high pressure washer hose. Replacement hose for reusing one-touch couplers and screw-type couplers.Hose Outer Diameter (Φmm) 15.6 Regular Pressure (MPa) 23 Used hose 3/8 (3 minutes) Minimum Burst Pressure (MPa) 70 Hose Inner Diameter (Φmm) 9.5 Material (Metal Hub) Stainless steel Reinforcing Layer With wire bladefrom ₱8,219.24Min. 4 days- FLUTECH Ventrance cleaning gunTrigger gun for commercial high pressure washer It is often used for washing trucks and vehicles. Inner side 3/8 size coupler plug standard (removable) * Connected to 3/8 size hoseHeat Resistance Temperature (℃) 160 Discharge Rate (L/min) 30 Withstand Pressure (MPa) 31
- Chubu High-Pressure Hose M22 screw connection couplerThere are two types of M22 screw type coupler connections used in high pressure washers: 1/4 (2 minutes) type and 3/8 (3 minutes) type. O-ring is attached to the brass shaft center * Cannot be connected to a shaft outer diameter of 15 mm such as Ryobi. * The shape may differ slightly depending on... Read MoreThread Pitch (mm) 1.5 Screw Dimensions (mm) 22 Outer Diameter (Φmm) Axis: 14
- IRIS OHYAMA High pressure washer Main body side couplingIt is a coupling on the main body side of the high pressure washer.Mass (g) 10 Main Unit Dimensions, Width W x Depth D x Height H (mm) 33×38 Trusco Part No. 484-8292 Material ABS
- MonotaRO Discharge extension high pressure hose (parts for high pressure washer MRO-1400)The high pressure hose can be extended by 5m. * Do not use for anything other than its intended purpose.Length (m) 5 Specification Parts for high pressure washer MRO-1400
- Chubu High-Pressure Hose Cleaning gun MV925 with straight lance (SUS304)Straight lance gun for commercial high pressure washers. When working on scaffolding such as in the painting industry, long guns such as short guns and truck car washes are often used. Lance uses stainless steel (SUS304) * The length is not the total length but the lance (nozzle) length.Spraying Angle 15 Heat Resistance Temperature (℃) 150 Nozzle 1549-1/4 Discharge Rate (L/min) 25 Withstand Pressure (MPa) 31from ₱12,330.91Min. 2 days
- TECOMEC Short swivel returned from hose for business useIt connects to the inside of the gun to prevent and release the twist of the hose. It has a total length of only 5 cm and rotates softly. * Gun is sold separately.Withstand Pressure (MPa) 21 Size 3/8 (3 minutes) male female Overall Length (mm) 50 Material Brass
- Uresin Former gun (with automatic dilution dial)The foam gun dial can be used for automatic dilution, and the chemical solution becomes foamy, so the cleaning agent can be sprayed evenly while visually checking. This ensures that there is no difference in cleaning agent results between sprayers. It is possible to select a chemical solution acc... Read MoreMaterial (Bottle) PE, (Cap) PP Dimensions, Width W x Depth D x Height H (mm) 230×120×284 Capacity (mL) 900 Acidic / Alkaline alkalinity
- Chubu High-Pressure Hose High pressure washer hose with 3/8 size one-touch couplerWire reinforcement Commercial high pressure washer hose. Compared to conventional products, the outer layer rubber of the hose contains a wear-resistant polymer, which makes it slippery and easier to work with. Both the one-touch coupler and the connection fittings are made of stainless steel and... Read MoreHose Outer Diameter (Φmm) 15.6 Regular Pressure (MPa) 23 Minimum Burst Pressure (MPa) 70 Hose Inner Diameter (Φmm) 9.5 Reinforcing Layer With wire blade
- TECOMEC Trigger gun for high pressure washer MV925 (main unit only)Triger gun used by many washing machine manufacturersHeat Resistance Temperature (℃) 160 Discharge Rate (L/min) 30 Withstand Pressure (MPa) 31from ₱6,163.40Min. 2 days
- TECOMEC Injection angle adjustment FA nozzle IDROTOJET2The injection angle can be adjusted from direct injection to a fan shape of 60 degrees. Front and rear to adjust high pressure, rotate to adjust angle.Heat Resistance Temperature (℃) 150 Withstand Pressure (MPa) 20.7 Discharge Rate (L/min) 30 Connection Size Rc1/4
- IRIS OHYAMA High pressure washer hose side couplingIt is a coupling on the water hose side.Mass (g) 24 Main Unit Dimensions, Width W x Depth D x Height H (mm) 34×60 Trusco Part No. 484-8284 Material ABS、POM
- MonotaRO Water absorption connector (parts for high pressure washer MRO-1400)* Do not use for anything other than its intended purpose.Suitable for High pressure washing machine MRO-1400 Specification Parts for high pressure washer MRO-1400 Type Water absorption connector
- Sonic Scrubbers Supersonic scrubber replacement brush set* A dedicated pad head (included with HT-JP and HALG-JP) is required to use the replacement pad.Trusco Part No. 819-3572from ₱986.39Min. 2 days
- Chubu High-Pressure Hose Commercial wash tube hoseExtra-fine tube wash hose with integrated nozzle A professional tube wash hose that can be connected to a household Karcher K series gun. * Gun is sold separately. * Cannot be connected to washing machines other than Karcher.Withstand Pressure (MPa) 15 Hose Inner Diameter (Φmm) 3.6 Hose Outer Diameter (Φmm) 6.1 Nozzle Outer Diameter (Φmm) 8 Suitable Manufacturer Karcher
- PA Super turbo nozzle (with nipple)It is called "Super Turbo Nozzle" by Seiwa Sangyo and "Tornado Nozzle" by Fulltech. MP type (It is easy to use because the rotating nozzle has a built-in spring) The nozzle is 040 size. * Cannot be used with 100V household high pressure washers.Nominal Size 040
- Chubu High-Pressure Hose 3/8 size hose, G1 / 2 threaded type coupling high pressure washer hoseWire reinforcement Commercial high pressure washer hose. Compared to conventional products, the outer layer rubber of the hose contains a wear-resistant polymer, which makes it slippery and easier to work with. The screw type coupler is made of brass and the mounting bracket is made of stainless ... Read MoreHose Outer Diameter (Φmm) 15.6 Regular Pressure (MPa) 23 Minimum Burst Pressure (MPa) 70 Hose Inner Diameter (Φmm) 9.5 Reinforcing Layer With wire bladefrom ₱9,863.91Min. 2 days
- MonotaRO Turbo lance (parts for high pressure washer MRO-1400)* Do not use for anything other than its intended purpose.Specification Parts for high pressure washer MRO-1400 Type Turbo lance
- ASADA Hand gun SUS one-touch coupler specificationSuitable for 13/100GS、15/150GS・GSP、16/150G・GP Mounting Screw Size PT1/4from ₱17,676.09Min. 2 days
- Chubu High-Pressure Hose Both ends M22 thread inner diameter 14mm nipple (for connection and conversion)This is the M22 nipple that is often used in high pressure washers. Compatible manufacturers: Karcher, Kranzle, 200V washer, * Cannot be connected to Ryobi Iris (partial).Thread Pitch (mm) 1.5 Inner Diameter (Φmm) 14 Screw outer diameter (mm) Metric screw 22
- MonotaRO Variable nozzle lance (parts for high pressure washing machine MRO-1400)* Do not use for anything other than its intended purpose.Suitable for High pressure washing machine MRO-1400 Specification Parts for high pressure washer MRO-1400 Type Variable nozzle lance
- Chubu High-Pressure Hose G1 / 2 screw connection couplerCorresponding manufacturer Super Industry, Zaoh Industry, Honda Screw Standard 3/8 The brass shaft does not come with an O-ring. The O-ring is attached to the inner surface of the male plug.hose connection 3/8 (3 minutes)from ₱986.39Min. 2 days
- Sonic Scrubbers Supersonic scrubber replacement pad set* A dedicated pad head (included with HT-JP and HALG-JP) is required to use the replacement pad.Trusco Part No. 819-3573 Pad Dimensions (mm) Φ38×H10
- TECOMEC Unloader valveHigh pressure washer pressure regulator. Mounting screw 3/8 size, pressure gauge mounting port 1/4 size.Discharge Rate (L/min) 30from ₱11,097.41Min. 2 days
- IRIS OHYAMA High pressure washer high pressure hose 8MA dedicated high-pressure hose that connects the main body of the high-pressure washer and the gun.Trusco Part No. 413-0499 Length (m) 8 Suitable Model FBN-401、FBN-604、FIN-901E、FIN-901W
- ESCO 800ml foam spray gun (with plug)The tip of the nozzle rotates 360 degrees, so you can spray bubbles at various angles. Can also be used as a spray nozzle by removing the tank.Tank dimensions (mm) 105×124×123(H) Connector Thread 3/4 ”NH female Mass (g) 307 Capacity (L) About 0.8 (water: 0.35, detergent: 0.45) Esco Part No. EA124LA-121P Specification With plug Applicable Pressure (MPa) [Water pressure] 0.28-0.63
- KOSHIN Rotating Nozzle (Cyclone Nozzle) for Koshin Engine Washer JCERotating nozzle nozzle (cyclone nozzle) with high detergency Please check the compatible model carefully. For replacement / repair * Please check the model and size carefully.
- Chubu High-Pressure Hose Quick nozzle by color (Kousin, Marunaka, Maruzen, etc.)It is often used in overseas-produced high-pressure washers. Corresponding manufacturer: Koshin, Marunaka, Maruzen, etc. Size: 035 Red: 0 degrees (straight) Orange: 15 degrees Green: 25 degrees White: 40 degrees Black: 5 pieces for soap 1 set * Nozzle connection coupler is sold separately 2QSF.from ₱1,849.84Min. 2 days
- IRIS OHYAMA High pressure washer parts Diffusion variable lanceThis is a special part for our tank type high pressure washer. Since it can be switched between direct injection and diffused water flow, it can be adjusted according to the dirt.Trusco Part No. 792-0377 Material Nylon
- Chubu High-Pressure Hose Overseas standard quick couplerCoupler screw standard 1/4 for nozzle tip for overseas production high pressure washer * Not compatible with domestically produced high pressure washers.Thread Standard 1/4from ₱821.92Min. 2 days
- Chubu High-Pressure Hose FA direct gunIdeal for tight spaces. Adjust straight injection to wide-angle injection with FA nozzle according to the object to be washed. With back hose on the inside side. With lever release lock pin. Inner side 3/8 coupler plug (removable). Adjust straight injection to wide-angle injection with FA nozzle ... Read MoreHeat Resistance Temperature (℃) 160 Discharge Rate (L/min) 30 Withstand Pressure (MPa) 31
- Chubu High-Pressure Hose Stainless steel lance for high pressure washer trigger gunBoth ends 1/4 (2 minutes) R male screw * The surface is not polished (performance does not change) * Be sure to use sealing tape when installing the gun.Withstand Pressure (MPa) 28 Material SUS304from ₱1,027.51Min. 2 days
- Vikan Foam Sprayer 9305Operating pH Range 1-14 (container) Capacity (L) 1.4 Outer Dimensions (mm) 350×145×210 Operating Temperature (℃) 40 Mass (g) 770from ₱9,041.57Min. 2 days
- Chubu High-Pressure Hose Brass FA variable nozzleVariable nozzle (FA nozzle) for high pressure washers. You can adjust it from straight to 60 degrees at hand. The body is made of brass and can be used for a long time.Connector 1/4 female thread
- Chubu High-Pressure Hose Tube cleaning Rotary reverse injection nozzleConnected to the male metal fitting of the hose for washing pipes. Clean while rotating the injection port.Diameter (Φmm) x Number of Holes 0.8 x after 3 Material Stainless steelfrom ₱16,442.59Min. 2 days
- IRIS OHYAMA High pressure washer turbo lance ASpiral water flow that is strong against pinpoint. A strong stream of water spirals out to wash away dirt.Mass (g) 220 Main Unit Dimensions, Width W x Depth D x Height H (mm) 45×45×450 Trusco Part No. 498-6083 Material Nylon
- IRIS OHYAMA High pressure washer extension hoseEasy work with a 10-meter hose extension! Reliable optional parts. Extension hose parts for high pressure washers made by Iris Ohyama. The extension of 10m enables a wider range of work. * This product cannot be used with the Iris Ohyama high-pressure washer FI-701.Trusco Part No. 381-0224 Mass (kg) About 1 Length (m) About 10 Diameter (Φmm) About 11 Material Aluminum, vinyl chloride resin
- Chubu High-Pressure Hose Overseas standard one-touch couplerIt is used in high pressure washers produced overseas. Koshin, Marunaka, Maruzen, etc. Screw standard 3/8 * Not compatible with domestically produced high pressure washers.Thread Standard 3/8
- Chubu High-Pressure Hose 1 Minute Size Stainless Steel Tube Hose1 minute size is the thinnest tube wash hose Drainage pipe cleaning, pipe cleaning, pipe cleaningIncluded Accessories 1/4 (2 minutes) nipple Withstand Pressure (MPa) 15 Hose Inner Diameter (Φmm) 3.6 Hose Outer Diameter (Φmm) 6.1
- IRIS OHYAMA High pressure washer Flexible nozzleIt is used by connecting to the extension pipe FAP. Since it can be refracted 180 degrees, it is ideal for hard-to-reach places and gaps. By turning the tip, you can switch to a wide-angle water flow. * This product is exclusively for the high pressure washer extension pipe FHP-EP16. Be sure to c... Read MoreDimensions, Width W x Depth D x Height H (cm) 38.8～39.5×3.8×3.8 Mass (g) 425 Trusco Part No. 484-8276 Material Nylon, PVC
