Floodlight Stands

A tripod for the floodlight. Tripod for floodlight

There are 7 holes in the middle pipe for inserting the fall prevention pin, and the height can be easily adjusted (1200-2000 mm). It can be used in combination with a plate for rotating lights. When using a rotating light or floodlight on a tripod, etc.

There is a stand on the top of the stand to attach the rotating light. The height can be freely adjusted between 1200 and 2000 mm.

By adjusting the position of the thumbscrew, it can be installed even in a narrow space. When you want to use the floodlight on a tripod.

It can be used for 10W to 50W size Fujikura LED floodlights. * Please do not use other than compatible models.

A wide-range lighting stand that illuminates from a high position. A wide-range lighting stand that illuminates from a maximum height of 2450 mm. It is a stretchable twist lock type. Attach lighting equipment for wide area lighting.

The height can be adjusted from 1 310 mm to 20000 mm in a two-stage system. Made of durable steel pipe.

1 in the center + 2 in the pan head. One in the center (no pan head is OK). It can be used even if the pan head is removed. A shape that allows you to attach a multi-light in the center. Can be folded compactly. Work can be done by illuminating a wide area.

A tripod for work lights with speakers. LED work light accessories for field work * Cannot be used with general tripods. * Product specifications are subject to change without notice. Please note.

Ideal for cases where the lighting moves a lot and the footing is poor.

Move with casters to places where light is needed. The energy saving effect is outstanding. The flexible Φ100 large rubber casters allow you to easily overcome steps, and the brakes allow you to fix it. Of the four casters, two have brakes.

Fluorescent stand light that is easy on the eyes and bright

It is a two-stage type and can be adjusted from 1320 mm to 1970 mm. Made of lightweight and durable steel pipe. For various lighting fixtures, tripod stand

Easy to install! Workability is improved! Side mount allows free rotation. Great for emergencies and emergencies! * Please use the stand in a stable place close to horizontal. It may cause a fall.

Move with casters to places where light is needed. The energy saving effect is outstanding. The flexible Φ100 large casters allow you to easily overcome steps, and the brakes allow you to fix it. Of the four casters, two have brakes.

Telescopic twist lock type that can quickly adjust the height from 1,180 mm to 2,450 mm Lightweight and easy to carry Aluminum attachment bar allows multiple lights to be attached

It is a dedicated light stand (tripod type) for SHL7718C. This is useful when you want stable light from a high place! With this stand, you can install up to two SHL7718C lights!

It can be used as a floor stand type by attaching it to lighting fixtures. It can be installed on a tripod while remaining on the floor stand.

Different colors can be used to display compartments with various meanings. Olefin film is used and does not generate toxic chlorine gas when burned. Uses a strong adhesive type synthetic rubber adhesive that has good followability on rough surfaces (uneven surfaces). For securing passages in fac... Read More

Safety has been improved by adopting a new tripod. It uses a lot of resin and aluminum, and its design is remarkably excellent. For strong lights.

Wide range irradiation is possible by installing 2 lights. * Since the number of units to be used is fixed, do not use more than or less than the number of units. * If you forget to close the screw or use the tripod without opening it firmly, it may lead to a serious accident.

Adjustable height from a minimum of 860 mm to a maximum of 1850 mm with a stepless telescopic tripod With a cord hook that can be attached to MAX 3 floodlights at the same time

It is a battery-powered LED light. Can be placed on the floor, held by hand, bent, or hung.

Built-in 4 straight tube type 18W LEDs. The stand base is foldable and can be placed on a commercial van so that it can be laid down and stored. In addition, since it has an outlet that can be stacked and stored, power tools can also be used and can be connected and lit (up to 10 lights) Φ75 with... Read More

* Only a tripod.

A tripod with a built-in air damper and a safety design that lowers slowly. The load capacity is up to 12kg.

Different colors can be used to display compartments with various meanings. Olefin film is used and does not generate toxic chlorine gas when burned. Uses a strong adhesive type synthetic rubber adhesive that has good followability on rough surfaces (uneven surfaces). For securing passages in fac... Read More

It is a stand for a large floodlight with multiple lights of a heavy floodlight.

A tripod stand dedicated to floodlights (work lights). Easy installation by simply fixing the handle of the floodlight with screws. Only one floodlight or two floodlights can be installed at the same time. Adjustable height. (Approximately 60-Approximately 156 cm) The height of the tripod can be ... Read More

Stable light stand with pan head Two-stage pole that can be freely adjusted from 930 mm to 1640 mm in height Light and easy to carry and move (mass 4.2 kg) Uses soft rubber feet that do not damage the floor The pole is an air cushion type and is safe without sudden drops when expanding and contra... Read More

Head: 480mm, height: 820-2000mm