Urethane-wrapped twin-wheel casters that do not easily scratch the floor. Ideal for OA chairs with large 60 mm casters.
* Please note the following points for products shipped directly from the furniture manufacturer.・ Measure the dimensions of the installation location and check if the product ... Read More
Applicable Hole Diameter (Φmm) 11.12 Shaft Length (mm) 26 Color Black Material Rigid urethane
The back is mesh and has excellent breathability. The seat surface is also made of highly cushioned mesh fabric. Comes with an elbow pad to reduce the burden on the elbow. With the gas pressure height adjustment lift, the height of the seat surface can be adjusted with a single lever. With a back... Read More
Allowable Load (kg) (Seat) 80 Mass (kg) 10.2 Type Office chair Armrest Yes
* Please note the following points for products shipped directly from the furniture manufacturer. * We cannot accept changes, cancellations, returns, or exchanges after ordering due to customer's convenience. In case of unavoidable cancellation, we may charge a "cancellation fee" at... Read More
A cushioning mat that disperses body pressure and reduces fatigue in the legs. The conductive performance is 1 x 10 to the 8th power ± 1 Ω, and conforms to the conductive standard RCJS-5-1. Has excellent water resistance, oil resistance, and bacterial resistance. Even a thin mat has sufficient cu... Read More
Mass (kg) 1.2 Heat Resistance Temperature (℃) 60 Dimensions, Width W x Depth D x Height H (mm) 900×600×12.7 Material Rubberized gel foam
A set of cage nuts and screws for mounting 19-inch mount equipment.
* Please note the following points for products shipped directly from the furniture manufacturer.・ Measure the dimensions of the installation location and check if the product you ordered can be installed before ordering.・ We c... Read More
CP-SVC12U, 18U, 24U, 36U EIA standard (19 inch) compatible 1U mounting shelf board. It can be installed only with the front mount. Ideal for installing small devices such as hubs and routers.
Shelf board with slit for CP-SVC series.
* Please note the following points for products shipped directly... Read More
Total Load Capacity (kg) 10 Length (mm) 350 Mass (kg) 4 Opening Width (mm) 482 Dimensions, Width W x Depth D x Height H (mm) 482 (inside size / 441) x 350 x 55 Height (mm) 55 Compatible Products CPSVC12U・18UN・24UN・36UN・18U・24U・36U Included Accessories Mounting cage nuts and screws (4 sets) Material Steel (epoxy resin powder coating)
* Please note the following points for products shipped directly from the furniture manufacturer.・ Measure the dimensions of the installation location and check if the product you ordered can be installed before ordering.・ We cannot accept changes, cancellations, returns or exchanges after orde... Read More
Total Load Capacity (kg) 10 Material Frame base: ABS plastic Material (Frame) Steel (epoxy resin powder coating)
Please use when installing heavy equipment. It is a set of two.
Support angle for RAC-SV18
* Please note the following points for products shipped directly from the furniture manufacturer.・ Measure the dimensions of the installation location and check if the product you ordered can be installed ... Read More
Mass (kg) 2 Total Load Capacity (kg) 30 Height (mm) 62 Opening Width (mm) 67 Dimensions, Width W x Depth D x Height H (mm) 67×776×62 Length (mm) 776 Suitable Models RACSV18UN Material Steel (melamine baking coating)
ED-CP series 19 inch mount angle. The 19-inch mount angle allows you to install 19-inch mount equipment. The 19-inch mount device can be installed not only in the horizontal position but also in the vertical position (one on each side). Horizontal and vertical positions cannot be installed at the... Read More
Height (mm) 100 Total Load Capacity (kg) 20 Opening Width (mm) 53.6 Material Steel (melamine baking coating)
We have achieved the best-in-class cushion volume at an affordable price. The seat surface can be adjusted to the desired height with the gas pressure lift device. A reasonable chair that can be used in various places. The backrest tilt mechanism allows you to adjust the backrest back and forth... Read More
Main Unit Dimensions, Width W x Depth D x Height H (mm) 520×520×720～810 Mass (kg) 7.3 Act on Promoting Green Procurement Conformity Function Gas pressure lift device, backrest tilt Armrest None
A free-standing desk panel that can be easily installed. As it is a frost-like acrylic panel, it does not get dark and does not feel oppressive. There are 4 sizes. There is a height of 360 mm that makes it easy to communicate when you raise your face while partitioning the space, and a height of ... Read More
Urethane-wrapped twin-wheel casters that do not easily scratch the floor. The color of the legs fits perfectly with the gray chair. Compatible with most Sanwa Supply chairs.
* Please note the following points for products shipped directly from the furniture manufacturer.・ Measure the dimensions ... Read More
Applicable Hole Diameter (Φmm) 11.12 Mass (g) 120 Shaft Length (mm) 26 Dimensions, Width W x Depth D x Height H (mm) 68×60×80 Material Hard urethane rubber
The back is mesh and has excellent breathability. With a simple lumbar support function, it reduces back fatigue. The height of the seat can be adjusted with a single lever using the gas pressure height adjustment lift.
* Please note the following points for products shipped directly from the fur... Read More
Allowable Load (kg) (Seat) 80 Mass (kg) 6 Color Black Function Gas pressure lift device, lumbar support Armrest None Locking method None Type Office chair
We have achieved the best-in-class cushion volume at an affordable price. The seat surface can be adjusted to the desired height with the gas pressure lift device. A reasonable chair that can be used in various places. The backrest tilt mechanism allows you to adjust the backrest back and forth,... Read More
Mass (kg) 8 Act on Promoting Green Procurement Conformity Armrest Yes
A cushioning mat that disperses pressure resistance and reduces fatigue in the legs. Has excellent water resistance, oil resistance, and bacterial resistance. The thick mat makes it hard to get tired even when standing for a long time. The anti-slip effect is improved by embossing the rubber surf... Read More
Heat Resistance Temperature (℃) 60 Material Rubberized gel foam
A desktop printer rack on which a laser printer can be installed. The load capacity of the top plate is 50 kg. The intermediate shelf board can be changed at a pitch of 100 mm, and various devices such as LCD monitors, LANHUBs, and wireless routers can be installed.
* Please note the following po... Read More
Total Load Capacity (kg) 50 Dimensions, Width W x Depth D x Height H (mm) 650×450×605 Mass (kg) 8.5 Material Steel (epoxy resin powder coating)
A low gas pressure cylinder that can be raised and lowered even with a light weight (30 kg or less). When this product is installed, the height and other dimensions may differ from the conventional dimensions. Never use it on an unsupported chair. It must be installed when assembling the chair. P... Read More
Mass (kg) 1.2 Dimensions, Width W x Depth D x Height H (mm) 50×50×300～400 Color Black Material Steel
It uses 8 high brightness LEDs. Brightness can be adjusted in 3 steps with the "Weak / Medium / Strong / OFF button". The large clip-on pedestal can be placed around your desk or pinched. It can also be used with batteries. (Uses 4 AA batteries / sold separately) The flexible arm allows... Read More
Illuminance (Lx) 110 lux (per square meter) Power Consumption (W) 2.5 Cable Length (m) About 1.2 Mass (g) About 170 Arm Length (mm) About 260 LED Life (Hours) About 30,000 Rated Output DC5V 500mA Product Type Light Connector USB A connector male Clip Clamping Width (mm) Up to 40
Nylon twin wheel casters suitable for use on carpet floors. It is convenient for replacement when the caster is damaged. Any chair with 11.12 mm insertion hole can be used. It is possible to support most chairs made by Sanwa Supply.
* Please note the following points for products shipped directly... Read More
Applicable Hole Diameter (Φmm) 11.12 Shaft Length (mm) 26 Dimensions, Width W x Depth D x Height H (mm) 68×52×80 Color Black Material Nylon
You can wrap a belt around a device placed on a shelf to fix it. The length can be adjusted according to the device to be fixed.
* Please note the following points for products shipped directly from the furniture manufacturer.・ Measure the dimensions of the installation location and check if the... Read More
An acrylic desktop partition that is clamped to the desk top. As it is a frost-like acrylic panel, it does not get dark and does not feel oppressive. The height is 360mm, which makes it easy to communicate by raising your face while partitioning the space. You can use it as a curtain plate by mou... Read More
Clamp 2 pieces Type Knockdown assembly type Color Panel / frost style, clamp / white
Prevents the tatami mats and flooring from being scratched. Compatible with casters with a diameter of 40 mm and a diameter of 50 mm.
* Please note the following points for products shipped directly from the furniture manufacturer.・ Measure the dimensions of the installation location and check i... Read More
Compatible with most Sanwa Supply chairs.
* Please note the following points for products shipped directly from the furniture manufacturer.・ Measure the dimensions of the installation location and check if the product you ordered can be installed before ordering.・ We cannot accept changes, canc... Read More
Applicable Hole Diameter (Φmm) 11.12 Shaft Length (mm) 26 Color Black Material Nylon
Convenient to use as an auxiliary desk. This is convenient when you place a laptop computer and give a presentation. It is possible in 4 steps of variable height (700, 760, 820, 880). With casters, it can be easily moved. The angle of the top plate can be adjusted on the side on which the laptop ... Read More
Length (mm) 450 Total Load Capacity (kg) 5 Mass (kg) 6.8 Opening Width (mm) 700 Dimensions, Width W x Depth D x Height H (mm) 700×450×700～880 Height (mm) 700～880
Prevents the casters of the chair from scratching the flooring floor. Carpet type chair mat. It is the best size for desks with a width of 1000 mm or more.
* Please note the following points for products shipped directly from the furniture manufacturer.・ Measure the dimensions of the installatio... Read More
Dimensions, Width W x Depth D x Height H (mm) 890×5×1400 Material PP, PE, (Back) PVC Shape mat Mass (kg) 1
A cart that stores devices such as multifunction printers under a desk. With a handle, it is easy to move back and forth.
An inkjet multifunction device can be installed under a desk.
* Please note the following points for products shipped directly from the furniture manufacturer.・ Measure the d... Read More
Mass (kg) 3.5 Total Load Capacity (kg) 40 Dimensions, Width W x Depth D x Height H (mm) 480×445×78 Material Top / wooden (melamine decorative board)
A rubber single-wheel caster that does not easily scratch the floor of the floor. It has excellent wear resistance and suppresses floor damage more than urethane casters. There is almost no noise when rolling. It has a high coefficient of friction and is hard to roll, so it has a sense of stabili... Read More
Applicable Hole Diameter (Φmm) 11.12 Mass (g) 184 Shaft Length (mm) 26 Dimensions, Width W x Depth D x Height H (mm) 75×50×85 Color Black Material For Hard rubbers
Dedicated fixed legs that fix the OA chair so that it does not roll. The height of the chair does not change even after it is installed. Compatible with most Sanwa Supply chairs.
* Please note the following points for products shipped directly from the furniture manufacturer.・ Measure the dimens... Read More
Applicable Hole Diameter (Φmm) 11.12 Shaft Length (mm) 26 Color Black Material Nylon
With a gas pressure lift device, you can adjust the height of the seat to your liking. With a backrest locking function, you can also adjust the hardness. Since PVC vinyl leather is used on the surface, it can be easily wiped off even if it gets dirty. Antibacterial and antifungal treatment keeps... Read More
Dimensions, Width W x Depth D x Height H (mm) (Backrest) 390 x 285 (Seat) 430 x 400 Width (mm) 515 Length (mm) 585 Mass (kg) 7.2 Height (mm) 700～870 Act on Promoting Green Procurement Conformity Armrest None Type Office chair
It is a tray for the whiteboard part of SPT-0816WB. Can store markers and erasers. Since the mounting part is a magnet specification, it can be easily mounted on a whiteboard that supports magnets.
* Please note the following points for products shipped directly from the furniture manufacturer.・... Read More
Dimensions, Width W x Depth D x Height H (mm) 350×52×70 Specification With magnet Mass (g) 500 Suitable for For SPT-0816WB
A set of hardware and peripheral devices can be stored. Compatible with A4 laser printers. The position of the middle shelf can be changed.
* Please note the following points for products shipped directly from the furniture manufacturer.・ Measure the dimensions of the installation location and c... Read More
Mass (kg) 11 Total Load Capacity (kg) 40 Dimensions, Width W x Depth D x Height H (mm) 640×450×689 Trusco Part No. 836-2393 Specification With adjuster
Nylon twin wheel casters. Comes with a stopper to stop the rotation of the wheels. By moving the lever up and down, you can put the stopper at any time. Compatible with most Sanwa Supply 5-legged chairs.
* Please note the following points for products shipped directly from the furniture manufactu... Read More
Applicable Hole Diameter (Φmm) 11.12 Shaft Length (mm) 26 Dimensions, Width W x Depth D x Height H (mm) 88×55×85 Color Black Material Nylon
A steel printer stand that also supports large laser printers.
* We do not deliver to private homes (detached houses / apartments). * Please note the following points for products shipped directly from the furniture manufacturer. * We cannot accept changes, cancellations, returns, or exchanges af... Read More
Cleanly stores excess cables. It can be installed anywhere!
* Please note the following points for products shipped directly from the furniture manufacturer.・ Measure the dimensions of the installation location and check if the product you ordered can be installed before ordering.・ We cannot ac... Read More
Opening Width (mm) 25 Dimensions, Width W x Depth D x Height H (mm) 25×35×70 Length (mm) 35 Mass (g) 50 Height (mm) 70 Included Accessories Magnet, double-sided tape Material Steel (melamine baking coating)
A steel printer stand that also supports large laser printers. Equipment such as laser printers can be stored under the desk. With a handle, it is easy to move back and forth.
* Please note the following points for products shipped directly from the furniture manufacturer.・ Measure the dimension... Read More
Mass (kg) 3.8 Top Panel Dimensions, Width W x Depth D (mm) 500×500 Dimensions, Width W x Depth D x Height H (mm) 500×535×90 Uniform Load Capacity (kg) 60 Material Steel (Epoxy powder coating) Color White Specification With casters
Dedicated fixed legs that can be fixed so that the OA chair does not roll. Urethane is pasted on the ground surface, so the ground is less likely to be scratched. Compatible with most Sanwa Supply chairs.
* Please note the following points for products shipped directly from the furniture manufact... Read More
Applicable Hole Diameter (Φmm) 11.12 Shaft Length (mm) 26 Dimensions, Width W x Depth D x Height H (mm) 50×50×60 Color Black Material Nylon
The back is mesh and has excellent breathability. With a backrest and seat locking function, you can lean back comfortably. The locking hardness can also be adjusted. With a simple lumbar support function, it reduces waist fatigue. The height of the seat can be adjusted with a single lever using ... Read More
Allowable Load (kg) (Seat) 80 Color Black Armrest None Type Office chair
Nylon twin-wheel casters suitable for use on floors such as carpets. It can also be used as a replacement when the casters are damaged. It can be used with any chair as long as it has an 11.12 mm insertion hole. Because the diameter of the mounting part is small, it goes well with slender legs. I... Read More
Applicable Hole Diameter (Φmm) 11.12 Shaft Length (mm) 22 Color Black Material Nylon Suitable Models Sanwa Supply 5-legged OA chair
By folding the left and right frames, you can adjust the width in 3 steps, and you can flexibly respond to layout changes. It is possible to match the size of the desk stand according to the size of the desk and display. By raising the position of the display, you can raise your eyes and improve ... Read More
Total Load Capacity (kg) 10 Material ABS resin Mass (g) About 1300
* Please note the following points for products shipped directly from the furniture manufacturer.・ Measure the dimensions of the installation location and check if the product you ordered can be installed before ordering.・ We cannot accept changes, cancellations, returns or exchanges after orde... Read More
Current (A) 0.14(50Hz)、012(60Hz) Voltage (V) 100 Rated Input (W) 12(50Hz)、10(60Hz) Main Unit Dimensions, Width W x Depth D x Height H (mm) 120×120×25 Rotational speed (r / sec) 1400(50Hz)、1600(60Hz) Power Cable (m) 2 Noise Level (dB) 24(50Hz)、27(60Hz) Mass of Main Unit (g) 370
SANWA SUPPLY Large Urethane Chair CastersUrethane-wrapped twin-wheel casters that do not easily scratch the floor. Ideal for OA chairs with large 60 mm casters. * Please note the following points for products shipped directly from the furniture manufacturer.・ Measure the dimensions of the installation location and check if the product ... Read MoreApplicable Hole Diameter (Φmm) 11.12 Shaft Length (mm) 26 Color Black Material Rigid urethane
