Spring Plungers

Positioning parts such as indexers and stoppers.

A spring plunger with a hexagonal hole and a minus groove made of steel for the main body and pins. The pressing pressure of the pin can be adjusted by turning the screw part of the main body. For positioning and fixing.

Loosening prevention function Strong against vibration High pulling moment Reliable positioning The loosening prevention function works up to about 20 times of attachment / detachment. For soft workpieces, use LPLN with a polyamide center pin. When inserting from the back cap side, use the separa... Read More

For soft workpieces, use ZNPLN PLN-SUS with a polyamide center pin. When inserting from the back cap side, use the separately sold spring plunger dedicated wrench (PW). It is a RoHS directive compliant product.

Light load type with low pressure. Positioning parts such as indexers and stoppers. Pin material: Nylon resin

A spring plunger with a hexagonal hole made of steel and a resin pin and a minus groove. The pressing pressure of the pin can be adjusted by turning the screw part of the main body. For positioning and fixing.

For heavy loads

Clean room specification memory foam spring plunger. It is small and is used to transport delicate workpieces, especially in the electronics and plastic injection molding industries. It contains a spring to protect it from external impact and dirt.

For heavy loads

For heavy loads

For light loads

For heavy loads

For heavy loads

A versatile spring plunger. Not only can it compensate for the height difference on the work surface, but it can also alleviate the impact during suction.

For heavy loads

For light loads