Hinges

By operating the stopper, the door can be stopped at any position. Left and right combined type canopy * When mounting with countersunk screws or tapping screws, chamfer the mounting holes on the panel.

A simple latch with an integrated latch and lever. You can easily adjust the rattling of the panel by using the panel stopper. Measuring equipment, distribution boards, etc.

Since a resin bush (POM) is used for the shaft part, there is no generation of metal powder due to wear. Since it is anodized, it has excellent corrosion resistance. Uses a stainless steel shaft.

Since a resin bush (POM) is used for the shaft part, there is no generation of metal powder due to wear. Since it is anodized, it has excellent corrosion resistance. Uses a stainless steel shaft.

Uses a stop mechanism with a strong coil spring. Left and right dual-purpose type (both in this figure and in the photo are set for the right. For the left, set the mounting bracket in reverse.) Machine tools, measuring equipment, communication equipment, cubicle construction, ships

It has a structure that is easy to install. Furniture, housing, etc.

The structure is suitable for heavy doors. Cubicles, distribution boards, control boards, vehicles

A simple latch lock that integrates a latch and a lever. Distribution board / measuring equipment

It stops at the specified position by the operation of the spring. Left and right combined type For top opening front lid

Holds the door at 150 ° Uses flame retardant material that allows you to hide the screws with the included cap. (Main body / UL94-HB) Canopy, server rack, office equipment, furniture

Since a resin bush is used, the generation of particles is suppressed. Made of aluminum and lightweight. The shaft is made of stainless steel. Various housings that require design

Since it is installed inside the door, the hinges cannot be seen. Distribution board door, distribution board door

One-touch stainless steel stay. The clean linear design and the calm texture unique to stainless steel enhance the style of the cabinet. It is made of all metal and uses rust-resistant SUS304 stainless steel, so it can be used with confidence even in places that handle fire, such as microwave ove... Read More

As it is stainless steel, it has excellent corrosion resistance. It is a standard flat hinge. CH-003 is a 32 mm wide type.

Made of stainless steel and has excellent corrosion resistance. Ships, vehicles, kitchen equipment, outdoor equipment * The size and load capacity of the compatible door are reference values when using two doors.

* Wood screws are not included.

Suitable for relatively large equipment such as distribution boards, distribution boards, and control boards for welding or heavy doors. Distribution board, distribution board, control board, etc.

You can choose the size according to your application from a wide variety. Various industrial machines

There is a spring in the core rod. The spring load is measured at the hinge mounting hole position. OA equipment, communication equipment, measuring equipment, etc.

A hinge that can stand still at any angle. The effective torque range is 180 ° from the mounting surface. Medical equipment, audio equipment, etc. * Please use 2 or less per lid. * Install this product with the shaft horizontal. * Set the mounting panel so that the P / Q dimension part of the hin... Read More

It is a direct acting type air damper. It can be used for sliding doors with a self-closing function, and the air pressure can be adjusted by turning the screw at the end. Easy to install due to its compact design. Achieved weight reduction by using resin for the internal rod. Air pressure can be... Read More

A hinge that can stand still at any angle. Medical equipment, audio equipment, etc. * Please use 2 or less hinges per lid. Also, when using one, be careful not to apply an unbalanced load to the hinge, such as by installing another bearing. (Note that the center of rotation of the bearing, etc. s... Read More

It is stainless steel and has excellent corrosion resistance. For measuring equipment, communication equipment, machine tools, small doors

It has a structure that is easy to install. Equipment housing. Furniture etc. Standing signs, etc.

A push-lock / push-open one-cycle, two-action, one-touch latch. Audio equipment, home appliances, etc. * Do not apply excessive force (impact) to the main body when locking or unlocking. It may be damaged. * The deviation of the center between the main body (8 mm width direction) and the keeper s... Read More

The reaction force is applied in the direction in which the rod contracts, not in the direction in which it expands. By adopting a special adjustment mechanism, the damper force can be finely adjusted with the needle valve. It is lightweight because it uses mainly resin. Compact design for easy i... Read More

It is a general-purpose hinge. General equipment, equipment, etc. * Mounting screws are not included. Please prepare separately.

Slide the arched spring to lock and unlock. The structure is spring-loaded and does not easily come off due to vibration. Ideal for simple fixing of moving parts. Can be used repeatedly. Specially equipped vehicle

* Wood screws are not included.

Resin is used as the main material to achieve small size and low cost. Home appliances / housing equipment / OA equipment * Please use in combination with an external stopper. * Please ensure sufficient mounting strength of the product. (As a guide, about 2 to 3 times the maximum efficacy value) ... Read More

No need to drill or screw. It can be easily fixed with adhesive. Adhesible boards are acrylic resin, ABS resin, styrene resin, and polycarbonate resin. Methylene chloride (methylene chloride) is convenient for adhesion. Small plastic door

* The load capacity (kg) is the mass of the door when two vertical units are used.

It is small and does not take up installation space. Measuring equipment, communication equipment, etc. * When mounting with salavis or sala rivets, chamfer the mounting side.

Since there are few protrusions on the surface, it is safe to use on the floor. Hatch / canopy for boats

Made of stainless steel and has excellent corrosion resistance. Ships, vehicles, kitchen equipment, outdoor equipment * This is a representative image. Please check the individual product information for the total number of holes.

It can be widely used as a shaft for various hinges. Distribution board, distribution board, other various hinges, etc.

Hold the door at any angle. A neat flat hinge type with no protrusions on the outside. Since it uses the friction of resin, it does not emit metal powder or abnormal noise. The default torque can be maintained for many years. Indoor equipment such as office equipment and furniture