All Category

Holding & Adjusting Related Parts

View : Grid List
Filter

Items 1 - 40 of 1541

Set Ascending Direction
  1. Set Collar Standard
    MonotaRO Set Collar Standard
    This is convenient when you want to adjust the position. * Do not use for anything other than its intended purpose.
    Surface Treatment  Black dyed  Material  S45C  Type  Standard 
    Rating:
    95%
    from ₱57.15
    Min. 2 days
  2. Key Material S45C (New JIS Parallel Double-Sided Square Key Standard Product)
    TRUSCO Key Material S45C (New JIS Parallel Double-Sided Square Key Standard Product)
    You can cut it to the required length and use it. A detent for the joint between the shaft of a motor or reducer and the gear or sprocket.
    Tolerance  JIS B 1301  Length (mm)  300  Shape  Double-sided key 
    Rating:
    97%
    from ₱98.27
    Min. 2 days
  3. SS level spacer
    KONDOTEC SS level spacer
    Since it is made of steel, it has high strength and can be used for heavy objects. We have various sizes, please adjust to the required thickness before use. Used for leveling heavy loads. * Because of the shirring process, there are some burrs on the cut surface such as burrs. Please wear gloves... Read More
    Dimension (mm)  50×100 
    from ₱1,233.09
    Min. 2 days
  4. Shim plate (standard)
    Iwata Mfg. Shim plate (standard)
    With a wide variety of plate thicknesses, it supports various clearance adjustments.
    from ₱1,644.26
    Min. 4 days
  5. 0.2x150mm [Steel] Shim
    ESCO 0.2x150mm [Steel] Shim
    For adjustment sheets that fill the gaps between machines. (It can also be used for metal engraving.)
    Size  150mm×2.5m  Tolerance  ±0.023  Material  Carbon steel  Esco Part No.  EA440E-0.2  Mass (g)  684  Thickness (mm)  0.2 
    from ₱1,932.08
    Min. 4 days
  6. Shim plate Stainless
    Iwata Mfg. Shim plate Stainless
    With a wide variety of plate thicknesses, it supports various clearance adjustments.
    Width W (mm)  150  Length L (mm)  500  Material  Stainless steel 
    from ₱5,341.07
    Min. 4 days
  7. 0.5x150mm [Steel] Shim
    ESCO 0.5x150mm [Steel] Shim
    For adjustment sheets that fill the gaps between machines. (It can also be used for metal engraving.)
    Mass (g)  1732  Thickness (mm)  0.5  Size  150mm×2.5m  Tolerance  ±0.039  Material  Carbon steel  Esco Part No.  EA440E-0.5 
    from ₱2,384.36
    Min. 4 days
  8. 0.203x150mm [Aluminum] Shim
    ESCO 0.203x150mm [Aluminum] Shim
    Thickness (mm)  0.178  Size  150mm×2.5m  Mass (g)  292  Material  Aluminum  Esco Part No.  EA440EG-0.2  Tolerance  ±5% 
    from ₱4,929.90
    Min. 4 days
  9. Single round key (free length) SUS316 / 7
    Seiki Seisakusho Single round key (free length) SUS316 / 7
    The length of the free length series can be freely specified in 1 mm increments. We use high-precision cold drawing material to guarantee accuracy and minimize variations in lots. SUS316 is used for the stainless steel material to improve corrosion resistance.
    Suitable Shaft Diameter (Φmm)  20~25  Width Tolerance (mm)  0/-0.036  Height Tolerance (mm)  0/-0.036  Height h (mm)  Width b (mm)  Tolerance  Width: h9, height: h9  Chamfer c (mm)  0.25~0.40 
    from ₱369.64
    Min. 9 days
  10. Shim Plate Dimension Cut Material Material Iron (Equivalent to SPCC)
    Iwata Mfg. Shim Plate Dimension Cut Material Material Iron (Equivalent to SPCC)
    Material  Iron (equivalent to SPCC) 
    Rating:
    89%
    from ₱127.05
    Min. 2 days
  11. Shim Plate Dimension Cut Stainless Steel (SUS304)
    Iwata Mfg. Shim Plate Dimension Cut Stainless Steel (SUS304)
    Material  Stainless steel (SUS304) 
    Rating:
    95%
    from ₱143.50
    Min. 2 days
  12. Standard Separated Collar Black Dyeing
    Iwata Mfg. Standard Separated Collar Black Dyeing
    A separate type color that can be attached and detached after machine assembly. Ideal for retrofitting and shaft parts that are difficult to disassemble.
    Type  separate  Material  S45C  Surface Treatment  Black dyeing (alkali coloring finish) 
    Rating:
    92%
    from ₱402.53
    Min. 2 days
  13. Shim Plate Dimension Cut Material Brass
    Iwata Mfg. Shim Plate Dimension Cut Material Brass
    Rating:
    91%
    from ₱143.50
    Min. 2 days
  14. Standard Set Collar Black Dyed
    Iwata Mfg. Standard Set Collar Black Dyed
    This is convenient when you want to adjust the position at present or when it is difficult to machine a snap ring groove on the shaft. One side is chamfered by 30 ° to avoid interference with the outer ring of the bearing.
    Surface Treatment  Black dyeing (alkali coloring finish)  Material  S45C  Chamfer Diameter D1 (Φmm) 
    Rating:
    94%
    from ₱57.15
    Min. 2 days
  15. Machine Key Double Round Key (Dimensional Cut Product)
    Osaka Spirit Machine Key Double Round Key (Dimensional Cut Product)
    Shape  Double circle key  Standard  New JIS standard  Material  S45C 
    Rating:
    98%
    from ₱65.38
    Min. 2 days
  16. Shim Plate (Roll)
    HAYASHI Shim Plate (Roll)
    Type  roll  Material  SUS301 
    Rating:
    92%
    from ₱534.11
    Min. 2 days
  17. Machine Key S45C New JIS Parallel Key Double-Sided Standard Product
    Hinode Machine Key S45C New JIS Parallel Key Double-Sided Standard Product
    Standard  New JIS standard  Length L (mm)  300 
    Rating:
    88%
    from ₱159.94
    Min. 2 days
  18. Machine Key Single Round Key (Dimension Cut Product)
    Osaka Spirit Machine Key Single Round Key (Dimension Cut Product)
    Standard  New JIS standard  Material  S45C  Shape  Single circle key 
    Rating:
    97%
    from ₱61.26
    Min. 2 days
  19. Standard Shaft Collar Type
    KANA (KATAYAMA CHAIN) Standard Shaft Collar Type
    Ideal for positioning idler sprockets and fixing bearing housings and shafts.
    Surface Treatment  Black dyed  Material  SS400 
    Rating:
    96%
    from ₱102.38
    Min. 2 days
  20. Shim Plate (Sheet)
    HAYASHI Shim Plate (Sheet)
    * We do not deliver to private homes (detached houses / apartments). * Depending on the delivery location, the delivery date may be postponed and additional shipping charges may be incurred. * Delivery to places without parking space is not possible. * The driver will not assist in unloading.
    Type  Seats  Material  SUS301 
    Rating:
    83%
    from ₱394.31
    Min. 2 days
  21. Standard Set Collar SUS304
    Iwata Mfg. Standard Set Collar SUS304
    This is convenient when you want to adjust the position at present or when it is difficult to machine a snap ring groove on the shaft. One side is chamfered by 30 ° to avoid interference with the outer ring of the bearing.
    Material  SUS304 
    Rating:
    79%
    from ₱143.50
    Min. 2 days
  22. Ring Shim Thick Type Set Steel
    Iwata Mfg. Ring Shim Thick Type Set Steel
    A bargain shim ring set with 10 shim rings each (40 in total) with thicknesses of 0.1 mm, 0.2 mm, 0.3 mm, and 0.5 mm.
    Material  Iron 
    Rating:
    98%
    from ₱657.46
    Min. 2 days
  23. Standard Set Collar Aluminum (A2017)
    Iwata Mfg. Standard Set Collar Aluminum (A2017)
    Material / Processing  Aluminum (A2017)  Type  Standard 
    Rating:
    96%
    from ₱90.05
    Min. 2 days
  24. Shim Box
    Iwata Mfg. Shim Box
    You can cut it freely according to your needs. Comes in a paper case that is convenient for storage.
    Rating:
    100%
    from ₱1,150.86
    Min. 2 days
  25. Machine Key S45C Old JIS Parallel Key Double-Sided Standard Product
    Hinode Machine Key S45C Old JIS Parallel Key Double-Sided Standard Product
    Dimension L (mm)  300  Standard  Old JIS type 1  Material  S45C 
    Rating:
    96%
    from ₱164.06
    Min. 2 days
  26. Shim Ring 1 Pack (10 Sheets) Inner Diameter 10mm Stainless Steel (SUS304)
    Iwata Mfg. Shim Ring 1 Pack (10 Sheets) Inner Diameter 10mm Stainless Steel (SUS304)
    Height adjustment, gap adjustment, etc.
    Material  Stainless steel (SUS304)  Inner Diameter d (Φmm)  10 
    Rating:
    97%
    from ₱534.11
    Min. 2 days
  27. Double-sided key
    Seiki Seisakusho Double-sided key
    SEIKI's S50C material is commonly used. It has better strength than S45C material.
    Material  S50C  Tolerance  h9  Shape  Double-sided key 
    Rating:
    73%
    from ₱102.38
    Min. 2 days
  28. Shikiita SIM
    Takene Shikiita SIM
    There is no cracking or buckling even when laid under a heavy object. No rust or corrosion. For level adjustment by laying under heavy objects such as machines and concrete products.
    Length (mm)  140  Width (mm)  70 
    Rating:
    65%
    from ₱821.92
    Min. 2 days
  29. Shim ring
    Iwata Mfg. Shim ring
    With a wide variety of plate thicknesses, it supports various clearance adjustments.
    Rating:
    98%
    from ₱32.89
    Min. 2 days
  30. Polished S45C Woodruff Key
    Hinode Polished S45C Woodruff Key
    The sink key is a key used in general machines to fix pulleys, gears, etc. to a rotating shaft. There are three types of sinking keys: parallel keys (1 type, 2 types), gradient keys, and headed gradient keys. The following materials are generally used for the key material. JIS G 3123 S20C-D or S4... Read More
    Shape  Half moon key  Material  S45C 
    Rating:
    94%
    from ₱53.04
    Min. 2 days
  31. Shim ring 1 pack (10 sheets) ID 8Φmm Stainless steel (SUS304)
    Iwata Mfg. Shim ring 1 pack (10 sheets) ID 8Φmm Stainless steel (SUS304)
    Height adjustment, gap adjustment, etc.
    Material  Stainless steel (SUS304)  Inner Diameter d (Φmm) 
    Rating:
    93%
    from ₱492.99
    Min. 2 days
  32. Separate color D cut screw type
    Iwata Mfg. Separate color D cut screw type
    A set collar with a separate structure that is convenient when assembling and maintaining machines. A type with strong thrust and less scratches on the shaft. Various parts such as brackets can be attached using the D-cut surface.
    Type  separate 
    Rating:
    100%
    from ₱821.92
    Min. 2 days
  33. Standard Separated Collar SUS304
    Iwata Mfg. Standard Separated Collar SUS304
    A separate type color that can be attached and detached after machine assembly. Ideal for retrofitting and shaft parts that are difficult to disassemble.
    Type  separate  Material  SUS304 
    Rating:
    80%
    from ₱575.22
    Min. 2 days
  34. Set color stainless steel SUS
    KONISHI MFG (MIYOSHI) Set color stainless steel SUS
    RoHS Directive  10 substances  Type  Standard 
    Rating:
    100%
    from ₱159.94
    Min. 2 days
  35. Shim for base (1 groove) For motor base
    Iwata Mfg. Shim for base (1 groove) For motor base
    With a wide variety of plate thicknesses, it supports various clearance adjustments. It is convenient when assembling a machine such as centering the motor base.
    Rating:
    85%
    from ₱127.05
    Min. 2 days
  36. Safety adjuster with non-slip Standard type
    No Brand Safety adjuster with non-slip Standard type
    An adjuster with a non-slip sheet that exerts a strong anti-slip effect. Since the grounding part and the knob rotate independently, you can make adjustments while they are installed. The non-slip sheet uses a "pit cushion sheet" that does not stain the floor. If the adhesive strength o... Read More
    Allowable Load (kg)  (Vertical) 50  Dimension H (mm)  18  Dimension D (Φmm)  30  RoHS Directive  6 substances  Type  Standard type 
    Rating:
    67%
    from ₱135.27
    Min. 2 days
  37. Hand Vice
    KAKUTA Hand Vice
    A hand vise that is adjusted with the bolt at the tip. Can be used for various operations such as temporary fixing of welding assembly, crimping, sheet metal, machines, jigs, etc. The tightening pressure shown is a guide. Impact, vibration, and internal pressure may cause damage. Be careful not t... Read More
    Rating:
    85%
    from ₱1,150.86
    Min. 2 days
  38. Shim ring 1 pack (10 sheets) ID 8Φmm Material iron (SPCC equivalent)
    Iwata Mfg. Shim ring 1 pack (10 sheets) ID 8Φmm Material iron (SPCC equivalent)
    Height adjustment, gap adjustment, etc.
    Material  Iron (equivalent to SPCC)  Inner Diameter d (Φmm) 
    Rating:
    100%
    from ₱213.40
    Min. 2 days
  39. Slit collar with 2 screw holes
    Iwata Mfg. Slit collar with 2 screw holes
    Since it is tightened on the surface, it has a strong thrust force and the shaft is not easily scratched. The most varied type in the series. Convenient for attaching brackets and plates and fixing sprockets.
    Rating:
    80%
    from ₱492.99
    Min. 2 days
  40. Parallel Key Double End Round Type (S45C)
    TRUSCO Parallel Key Double End Round Type (S45C)
    Both round keys are easy to use and ready to use. A detent for the joint between the shaft of a motor or reducer and the gear or sprocket.
    Shape  Double circle key  Type  Double circle type  Tolerance  JIS B 1301 
    Rating:
    100%
    from ₱328.52
    Min. 2 days
View : Grid List
Filter

Items 1 - 40 of 1541

Set Ascending Direction