All Category

Heaters

View : Grid List
Filter

15 Item(s)

Set Ascending Direction
  1. Silicon cord heater
    No Brand Silicon cord heater
    Since the heater coating is silicone rubber, it has excellent heat resistance. Since the heater is cord-shaped, it can be attached to any shape. A heater in which a heating element (nichrome wire) and silicon are integrally molded. * Do not heat the heater in the air (baked in the air). It may ca... Read More
    Lead Wire (m)  Heater outer diameter (Φmm)  2.5  Country of Origin  Japan  Material  Silicon 
    Rating:
    96%
    from ₱1,603.14
    Min. 2 days
  2. Compact hot air heater (with thermocouple)
    No Brand Compact hot air heater (with thermocouple)
    From normal temperature range to high temperature range (800 ℃). Output freely. The compact body does not require installation space and can be installed in equipment in tight spaces. The heater can be easily fixed using the nut of the one-touch joint. Soldering, printing drying, laminating, tube... Read More
    Thermocouple  Included 
    from ₱15,209.09
    Min. 13 days
  3. Saikan heater W type (with step)
    HAKKO (Hakko Electric) Saikan heater W type (with step)
    It is a single terminal type heater with two heating wires inside the sheath cycler. It is connected to the external lead wire inside the sleeve and is treated with a moisture-proof seal. There is no trouble in the terminal part due to the stepped structure of the connection part between the heat... Read More
    Dimensions SL (mm)  35  Dimension SD (Φmm)  8.0  Tolerance  Class 2  Compensation lead  Glass braided coating / KCC-2-H (VX-H)  Temperature Measuring Contact  Non-ground type  Material (Sheath)  SUS316  Type  Sheath type 
    from ₱24,665.94
    Min. 5 days
  4. Compact hot air heater High power (with thermocouple)
    No Brand Compact hot air heater High power (with thermocouple)
    It has a large electric capacity and can increase the amount of discharged air. It is the best heater for heating products with a large heat capacity or when you want to increase the production speed. Soldering, printing drying, laminating, tube shrinkage, deburring, draining drying, wire drying ... Read More
    Voltage (V)  200  Thermocouple  Included 
    from ₱24,254.77
    Min. 13 days
  5. Compact hot air heater
    No Brand Compact hot air heater
    From normal temperature range to high temperature range (800 ℃). Output freely. The compact body does not require installation space and can be installed in equipment in tight spaces. The heater can be easily fixed using the nut of the one-touch joint. Soldering, printing drying, laminating, tube... Read More
    Thermocouple  None 
    from ₱12,330.91
    Min. 13 days
  6. Micro ring heater
    HAKKO (Hakko Electric) Micro ring heater
    The micro ring heater is a nozzle heating heater in which a Cykan heater (Φ2.4) is wound in a ring shape and the circumference is formed by a tightening band. Compared to conventional band heaters and cast heaters, it is thinner and lighter and has excellent thermal conductivity. The Cykan heater... Read More
    Withstand Voltage  600 VAC for 1 minute  Voltage (V)  Single phase 220 
    from ₱12,330.91
    Min. 5 days
  7. Silicon rubber heater for piping
    HAKKO (Hakko Electric) Silicon rubber heater for piping
    Silicon rubber heaters are flexible, thin planar heating elements that replace conventional metal heaters. It can be wound around pipes of Φ30 or more. * Never wrap it in layers. * Make sure that the heat generating part is in close contact with the piping. At this time, do not bend the wire take... Read More
    Maximum Operating Temperature (℃)  250  Type  Winding type  Heating Element  Nickel-chromium metal heating wire  Continuous Use Temperature (℃)  200 
    from ₱10,275.08
    Min. 5 days
  8. Compact hot air heater High power
    No Brand Compact hot air heater High power
    It has a large electric capacity and can increase the amount of discharged air. It is the best heater for heating products with a large heat capacity or when you want to increase the production speed. Soldering, printing drying, laminating, tube shrinkage, deburring, draining drying, wire drying ... Read More
    Voltage (V)  200  Thermocouple  None 
    from ₱20,554.26
    Min. 13 days
  9. Hot air heater C type
    NIHON SEIKI Hot air heater C type
    It supplies compressed air and generates hot air at a maximum of 800 ° C. Three types of tip shapes can be selected. The dedicated stand allows it to be fixed in all directions. For preheating solder joints and heating heat-shrinkable tubes * Be sure to flow compressed air of MIN.18L / min when t... Read More
    Suitable Air Pressure (MPa)  0.01~0.2  Trusco Part No.  257-4774  Power Consumption (W)  440  Air Flow Rate (L/min)  5~60  Mass (g)  60  Connector Diameter  R1/8  Power Input (V)  Single phase 200 
    from ₱20,554.26
    Min. 6 days
  10. Custom nozzle heater
    HAKKO (Hakko Electric) Custom nozzle heater
    The custom nozzle heater is a high-performance heater completed based on the technology of Cykan heater. Since the heater element is integrated with the internal heater case, the generated heat is efficiently transferred. * Please use the sleeve and flexible tube at an ambient temperature of 180 ... Read More
    Dimension C (Φmm)  3.2  Continuous Use Temperature (℃)  400  Voltage (V)  Single phase 200 
    from ₱36,178.63
    Min. 5 days
  11. Precision hot plate
    HAKKO (Hakko Electric) Precision hot plate
    Since it is integrally molded by cutting, it is a hot plate that is robust and has excellent surface processing accuracy. The plate material is stainless steel and aluminum, so it can be used even in a clean environment. Since the hot plate is a cartridge heater insertion type, it has a structure... Read More
    Flatness (mm)  0.1 or less  Surface Roughness (S)  Within 6.3 
    from ₱94,527.41
    Min. 5 days
  12. Hot air heater A type
    NIHON SEIKI Hot air heater A type
    It supplies compressed air and generates hot air at a maximum of 800 ° C. Three types of tip shapes can be selected. The dedicated stand allows it to be fixed in all directions. For preheating solder joints and heating heat-shrinkable tubes * Be sure to flow compressed air of MIN.18L / min when t... Read More
    Suitable Air Pressure (MPa)  0.1~0.6  Air Flow Rate (L/min)  10~180  Trusco Part No.  257-4769  Power Consumption (W)  440  Mass (g)  60  Connector Diameter  R1/8  Power Input (V)  Single phase 200 
    from ₱19,320.76
    Min. 6 days
  13. Cartridge heater
    Yagami Inc. Cartridge heater
    Standardized cartridge heater for 100 V.
    Voltage  100V single phase  Type  CNS type 
    from ₱2,754.41
    Min. 12 days
  14. Cartridge heater
    Yagami Inc. Cartridge heater
    A custom-made cartridge heater that can meet a wide range of desired specifications.
    from ₱2,014.31
    Min. 12 days
  15. Hot air heater B type
    NIHON SEIKI Hot air heater B type
    It supplies compressed air and generates hot air at a maximum of 800 ° C. Three types of tip shapes can be selected. The dedicated stand allows it to be fixed in all directions. For preheating solder joints and heating heat-shrinkable tubes * Be sure to flow compressed air of MIN.18L / min when t... Read More
    Suitable Air Pressure (MPa)  0.01~0.2  Trusco Part No.  257-4778  Power Consumption (W)  440  Air Flow Rate (L/min)  5~60  Mass (g)  60  Connector Diameter  R1/8  Power Input (V)  Single phase 200 
    from ₱20,554.26
    Min. 6 days
View : Grid List
Filter

15 Item(s)

Set Ascending Direction