Actuators
SIGMAKOKI Control pat / Joy patRequired for manual operation, memory settings, etc.Positioning accuracy (°) 0.1 Load capacity (N) 196 RoHS directive (corresponding to 10 substances) Correspondence Suitable for FINE-01y、FINE-503 origin sensor Nonefrom ₱7,396.90Min. 2 days- SIGMAKOKI I / O signal connectorRoHS directive (corresponding to 10 substances) Correspondence Specification I / O signal connectorfrom ₱945.27Min. 4 days
- Kohzu Precision Small actuatorA low-priced actuator that combines a compact, high-performance stepping motor and precision grinding screws. It can be automated by replacing the manufacturer's manual stage or the micrometer head of the mirror holder. It can be driven by the manufacturer's stepping motor controller. * C... Read MoreRepeated positioning accuracy (mm) 0.003 Lost motion (mm) 0.005 Resolution (μm) 0.1 (minimum response / reference) Allowable Load (N) 29.4 (static load) Motor Type PK513PB-C9(□20mm) Lead Screw (mm) Precision grinding screw Φ4, lead 0.5from ₱32,889.29Min. 8 days
- CHUO PRECISION INDUSTRIAL Auto microResolution (mm) 0.00002 Positioning accuracy (mm) 0.015 Mass (kg) 0.27 Maximum speed (mm / s) 0.3 (at 15000PPS) lead screw lead (mm) 0.5 Movement distance (mm) 0～30 Mounting Diameter (Φmm) 10 0-0.009 thrust (N) 98(10kgf) Cable Length (m) About 1.5 Surface Treatment Black chrome reduction unit Reduction ratio 150 Material Steel Specification Stepping motor specifications Repeatability (mm) ±0.003from ₱110,974.11Min. 32 days
- SIGMAKOKI Small automatic gonio stageAn automatic goniometer stage driven by a stepping motor that uses a cross roller guide. A highly rigid goniometer stage that uses a cross roller guide with excellent wear resistance. The height of the center of rotation from the table surface is available in 75 mm / 100 mm / 130 mm, and you can ... Read MoreMaterial (Stage) Aluminum Surface Treatment (Stage) Black alumite Load capacity (N) 24.5 table width (mm) 60 table length (mm) 60 RoHS directive (corresponding to 10 substances) Correspondence Moving guide Cross roller origin sensor None Type Tilt stage Feed method Warm and worm wheel Positioning accuracy (°) ±0.004from ₱98,639.09Min. 4 days
- SIGMAKOKI Automatic polarizer holderPositioning accuracy (°) 0.02 Lost motion (°) 0.05 Mass (kg) 0.5 Travel distance (°) 30/s RoHS directive (corresponding to 10 substances) Correspondence Accuracy (mm) Runout / 0.02from ₱98,639.09Min. 4 days
- SIGMAKOKI Sigma Fine StageStroke (Z distance) (mm) 0.1±15% Stroke (Y distance) (mm) 0.1±15% Stroke (X distance) (mm) 0.1±15% Resolution 10nm (when closed) table length (mm) 60 table width (mm) 60 Load capacity (N) 9.8 RoHS directive (corresponding to 10 substances) Correspondence Type xyz stagefrom ₱324,781.22Min. 4 days
- SIGMAKOKI DS displayA compact and lightweight digital sensor that uses electrostatic coupling of distributed capacitors. Unlike the conventional eddy current type capacitance sensor, the signal is transmitted as a digital signal, so it is resistant to noise and does not require an A / D converter or high-precision a... Read MoreDetection Range (mm) 0～1 RoHS directive (corresponding to 10 substances) Correspondence Resolution Maximum / 5mm or lessfrom ₱135,644.16Min. 4 days
- CHUO PRECISION INDUSTRIAL Auto microAn automatic actuator that uses a 5-phase stepping motor. It has a very powerful thrust of 10 kg. Since it is equipped with a reduction ratio of 1:50, it has extremely high resolution. Equipped as standard with a limit sensor that can also be used as the origin. The 0.35A / phase model of the QT-... Read MoreResolution (mm) 0.00002 Positioning accuracy (mm) 0.01 Mass (kg) 0.25 Maximum speed (mm / s) 0.3 (at 15000PPS) lead screw lead (mm) 0.5 Movement distance (mm) 0～15 Mounting Diameter (Φmm) 9.5 0-0.009 thrust (N) 98(10kgf) Cable Length (m) About 1.5 Surface Treatment Black chrome reduction unit Reduction ratio 150 Material Steel Specification Stepping motor specifications Repeatability (mm) ±0.003from ₱106,862.44Min. 32 days
- Kohzu Precision Thin alignment stageMaterial (Main Unit) Aluminum alloy Feed method Ball screw / lead 1 mm Connector Round 20 pin (Hirose: + RP13A-12JG-20PC) Finish White Lost motion (mm) XY：≦ 0.002 Backlash XY：≦ 1μm、θ：≦ 0.005° Repeatability (μm) XY：≦±0.5 Type xy stage / tilt stage Lost motion (°) θ：≦ 0.005from ₱271,329.44Min. 27 days
- SIGMAKOKI Small automatic gonio stageAn automatic goniometer stage driven by a stepping motor that uses a cross roller guide. A highly rigid goniometer stage that uses a cross roller guide with excellent wear resistance. The height of the center of rotation from the table surface is 75 mm / 100 mm, and you can select it according to... Read MoreMaterial (Stage) Aluminum Surface Treatment (Stage) Black alumite Load capacity (N) 19.1 table length (mm) 60 table width (mm) 60 RoHS directive (corresponding to 10 substances) Correspondence Moving guide Cross roller origin sensor None Type Tilt stage Feed method Warm and worm wheel Positioning accuracy (°) ＜±0.004from ₱184,984.26Min. 4 days
- SIGMAKOKI Stepping motor driven small actuatorA low-priced actuator that combines a compact, high-performance stepping motor and precision grinding screws. You can select from two types, 13 mm and 25 mm, depending on the application.Discontinued
