Male Thread Type
A male threaded type is a type of spherical plain bearing (rod end) that has been threaded on the main body for easy installation. The rod end, which has a small body but can handle both radial and axial loads, is an important part that acts like a joint. It is widely used at work sites such as maintenance shops for automobiles and motorcycles. There are various sizes and performances, such as oil-free types with synthetic resin adhered to the race surface of the ball to demonstrate excellent self-lubrication, and types with anti-corrosion treatment. You can choose according to the device you are using.
Other Related Pages
ASAHI SEIKO Join Ball Male Threaded Rod End FDM Type (Stainless Steel Series)RoHS directive (corresponding to 10 substances) Correspondencefrom ₱1,849.84Min. 2 days- IKO (NIPPON THOMPSON) Pillow ball POS (with external thread, lubricated, right-hand thread)A self-aligning spherical plain bearing that can simultaneously load a large radial load and an axial load in both directions with a small capacity. The pillow ball rod end is easy to install because the main body is machined with female or male threads. It is used in control mechanisms and link ... Read MoreSpecification 1N≒0.102kgf Material Chrome plating (spherical inner ring) Lubrication type Refueling type Screw direction Right-handed screw Material (Bushing) Special copper alloy Type With male thread Material (Main Unit) Zinc chromate
-
- CCTY Bearing Japan Rod end (Oil-free male thread) Right-hand thread typeA spherical plain bearing that uses a spherical inner ring with the same accuracy and hardness as a steel ball for bearings, and is used for mounting the rod end of rocking motion.RoHS directive (corresponding to 10 substances) Correspondence Type Right-handed screw
- THK Rod end POS type (Right thread type)The structure has a special alloy inserted between the colored chromate-treated steel holder and the hard chrome-plated spherical inner ring, resulting in high rigidity and excellent wear resistance and corrosion resistance. The holder terminal is a male screw type. * Please use after lubricating... Read MoreRoHS directive (corresponding to 10 substances) Correspondence JIS Class JIS Class 2 Type Type with male thread
- CCTY Bearing Japan Rod end (Oil-free male thread) Left-hand thread typeA spherical plain bearing that uses a spherical inner ring with the same accuracy and hardness as a steel ball for bearings, and is used for mounting the rod end of rocking motion.RoHS directive (corresponding to 10 substances) Correspondence Type Left-hand thread
- THK Rod End NOS T Type (Right-Hand Thread Type)An oil-free type in which a self-lubricating synthetic resin is molded between the steel holder and the inner ring of the spherical surface. The clearance on the slip surface is minimized and accurate link motion can be obtained. It is a type with a male screw holder terminal.RoHS directive (corresponding to 10 substances) Correspondence JIS Class JIS Class 2 Type Right-hand thread type
- THK Rod end POS type (left-hand thread type)The structure has a special alloy inserted between the colored chromate-treated steel holder and the hard chrome-plated spherical inner ring, resulting in high rigidity and excellent wear resistance and corrosion resistance. The holder terminal is a male screw type. * Please use after lubricating... Read MoreRoHS directive (corresponding to 10 substances) Correspondence JIS Class JIS Class 2 Type Type with male thread
- IKO (NIPPON THOMPSON) Pillow ball POSEC (with external thread, oil-free, right-hand thread)A self-aligning spherical plain bearing that can simultaneously load a large radial load and an axial load in both directions with a small capacity. The pillow ball rod end is easy to install because the main body is machined with female or male threads. It is used in control mechanisms and link ... Read MoreChamfer Dimension r1 (mm) 0.2 Specification 1N≒0.102kgf Material Chrome plating (spherical inner ring) Lubrication type Oil-free type Screw direction Right-handed screw Material (Bushing) Special copper alloy Type With male thread Material (Main Unit) Zinc chromate
- THK Rod-end NOS T Type Left-hand ThreadAn oil-free type in which a self-lubricating synthetic resin is molded between the steel holder and the inner ring of the spherical surface. The clearance on the slip surface is minimized and accurate link motion can be obtained. It is a type with a male screw holder terminal.RoHS directive (corresponding to 10 substances) Correspondence JIS Class JIS Class 2 Type Oil-free male threaded type
- IKO (NIPPON THOMPSON) Pillow ball POSEC (with external thread, oil-free, left-hand thread)A self-aligning spherical plain bearing that can simultaneously load a large radial load and an axial load in both directions with a small capacity. The pillow ball rod end is easy to install because the main body is machined with female or male threads. It is used in control mechanisms and link ... Read MoreChamfer Dimension r1 (mm) 0.2 Specification 1N≒0.102kgf Material Chrome plating (spherical inner ring) Screw direction Left-hand thread Lubrication type Oil-free type Material (Bushing) Special copper alloy Type With male thread Material (Main Unit) Zinc chromate
- MTR RBM-E Rod end (Mold type) Male threadMaterial (Ball) Bearing steel (chrome plating) Material (Body) Carbon steel (galvanized) Screws Male screw Type RBM-E
- CCTY Bearing Japan Rod end (lubrication male thread) right-hand thread typeA spherical plain bearing that uses a spherical inner ring with the same accuracy and hardness as a steel ball for bearings, and is used for mounting the rod end of rocking motion. * M of M-6H in the dimensional drawing represents the following dimensions M (mm) M5 × 0.8, and 6H and 6g represent ... Read MoreRoHS directive (corresponding to 10 substances) Correspondence Type Right-handed screw
- TRUSCO Rod end oil-free male thread typeA non-lubricated type in which a synthetic resin with excellent self-lubricating properties is adhered to the race surface of the ball. It consists of a special copper alloy with a self-lubricating synthetic resin lace inserted into a rust-preventive S45C body and a hard chrome-plated ball. Vario... Read MoreOperating Temperature Range (℃) -30～+150
- TRUSCO Rod end lubricated male thread type (right thread)A rod end with excellent wear resistance, corrosion resistance, and rigidity, consisting of a rust-preventive S45C body, a special copper alloy inserted into it, and a hard chrome-plated ball. Lubrication is possible from the grease nipple of the body to the sliding surface. Various transport mac... Read MoreOperating Temperature Range (℃) -50～+230 Type Right-handed screwfrom ₱821.92Min. 2 days
- CCTY Bearing Japan Rod end (lubrication male thread) left-hand thread typeA spherical plain bearing that uses a spherical inner ring with the same accuracy and hardness as a steel ball for bearings, and is used for mounting the rod end of rocking motion.RoHS directive (corresponding to 10 substances) Correspondence Type Left-hand thread
- MTR PR-E Rod end (4-piece type) Male threadMaterial (Ball) Bearing steel (chrome plating) Material (Body) Carbon steel (galvanized) Material (Insert Nut) Copper alloy Screws Male screw Type PR-Efrom ₱575.22Min. 6 days
- TRUSCO Rod end lubricated male thread type (left thread)A rod end with excellent wear resistance, corrosion resistance, and rigidity, consisting of a rust-preventive S45C body, a special copper alloy inserted into it, and a hard chrome-plated ball. Lubrication is possible from the grease nipple of the body to the sliding surface. Various transport mac... Read MoreType Left-hand thread Operating Temperature Range (℃) -50～+230from ₱821.92Min. 2 days
- ASAHI SEIKO Join Ball Male thread rod end Model JAMRoHS directive (corresponding to 10 substances) Correspondencefrom ₱739.69Min. 5 days
- NMB (Minebea) PR-E Rod end (4-piece type) Male threadAs it is also called the insert type, it has a structure in which two inserts are press-fitted from both sides of the end face of the head of the body. Assemblies can be manufactured easily at low cost without the need for sphericals like 3-piece rod ends. Since S48C equivalent is used for the bo... Read MoreMaterial (Ball) Bearing steel (chrome plating) Material (Body) Carbon steel (galvanized) Material (Insert Nut) Copper alloy Screws Male screw Type PR-E
-
- IKO (NIPPON THOMPSON) Pillow ball POS (with external thread, oil supply type, left-hand thread)A self-aligning spherical plain bearing that can simultaneously load a large radial load and an axial load in both directions with a small capacity. The pillow ball rod end is easy to install because the main body is machined with female or male threads. It is used in control mechanisms and link ... Read MoreSpecification 1N≒0.102kgf Material Chrome plating (spherical inner ring) Screw direction Left-hand thread Lubrication type Refueling type Material (Bushing) Special copper alloy Type With male thread Material (Main Unit) Zinc chromate
- IKO (NIPPON THOMPSON) Refueling Type Pillow Ball Rod End POS (Insert Type, with Male Thread, Left-Hand Thread)Pyroball is a self-aligning spherical sliding bearing that can simultaneously apply a large radial load and an axial load in both directions with a small volume. This bearing is wear-resistant with a familiar special copper alloy bush inserted between the inner ring of the spherical surface, whic... Read MoreScrew direction Left-hand threadfrom ₱945.27Min. 2 days
- NMB (Minebea) RBM-E + rod end (mold type) + male screwManufactured by injection molding a self-lubricating resin between the ball and the lace or body. Unlike the Teflon type, this does not require the process of weaving or adhering the liner into a cloth shape, has excellent mass productivity, and can be manufactured at a relatively low cost. It ca... Read MoreMaterial (Ball) Bearing steel (chrome plating) Material (Body) Carbon steel (galvanized) Screws Male screw Type RBM-E
- IKO (NIPPON THOMPSON) Refueling Type Pillow Ball Rod End POS (Insert Type, with Male Screw)Pyroball is a self-aligning spherical sliding bearing that can simultaneously apply a large radial load and an axial load in both directions with a small volume. This bearing is wear-resistant with a familiar special copper alloy bush inserted between the inner ring of the spherical surface, whic... Read MoreScrew direction Right-handed screwfrom ₱945.27Min. 2 days
- MonotaRO Rod End No Lubrication Male Thread Left-Hand Thread TypeSince the ball and the housing are in contact with each other on a spherical surface, extremely smooth rotation and sliding motion can be obtained. Since the main body is machined with screws, it is easy to install. The non-lubricated type is suitable for loading a load in a certain direction, an... Read MoreChamfer Dimension r1 (mm) 0.3 Screw direction Left-hand thread Type Male screw Lubrication type Oil-free type Surface Treatment (Main Unit) Zinc platingfrom ₱254.51Min. 2 days
- MonotaRO Rod End Lubrication-free External Right-Hand Thread TypeSince the ball and the housing are in contact with each other on a spherical surface, extremely smooth rotation and sliding motion can be obtained. Since the main body is machined with screws, it is easy to install. The non-lubricated type is suitable for loading a load in a certain direction, an... Read MoreType Male screw Lubrication type Oil-free type Surface Treatment (Main Unit) Zinc plating Screw direction turn right
- MonotaRO Rod End Refueling Male Thread Left-Hand Thread TypeSince the ball and housing are in contact with each other on a spherical surface, extremely smooth rotation and sliding motion can be obtained. Since the main body is machined with screws, it is easy to install. Link mechanism for robots and transport equipment Link mechanism for machine tools, t... Read MoreChamfer Dimension r1 (mm) 0.3 Screw direction Left-hand thread Type Male screw Lubrication type Refueling type Surface Treatment (Main Unit) Zinc platingfrom ₱254.51Min. 2 days
- NBK (Nabeya Bi-tech Kaisha) Ball Joint Set Screw Type (Male Thread) SBJS-MRoHS directive (corresponding to 10 substances) Correspondencefrom ₱6,163.40Min. 7 days
- NBK (Nabeya Bi-tech Kaisha) Ball Joint Clamp Lever Type (Male Thread) SBJL-MRoHS directive (corresponding to 10 substances) Correspondencefrom ₱6,985.74Min. 7 days
- NBK (Nabeya Bi-tech Kaisha) Ball joint (male screw) - Aluminum frame end face mountingPositioning parts using balls. Attach the work piece to the screw at the tip of the ball before use. The threaded ball can be tilted up to ± 15 ° in any direction of 360 °. By tightening the fixing hexagon socket head cap screw, the adjusted angle is securely maintained. □ Can be attached to the ... Read MoreHolding torque (N.m) 10 Maximum Load (kg) 10 Tightening Torque (Nm) 12.5 Screw Tightening Torque (N・M) 3from ₱5,341.07Min. 8 days
- NBK (Nabeya Bi-tech Kaisha) Ball joint (male screw) - Round pipe mountingPositioning parts using balls. Attach the work piece to the screw at the tip of the ball before use. The threaded ball can be tilted up to ± 15 ° in any direction of 360 °. By tightening the fixing hexagon socket head cap screw, the adjusted angle is securely maintained. It can be attached to a r... Read MoreHolding torque (N.m) 10 Maximum Load (kg) 10 Tightening Torque (Nm) 12.5 Screw Tightening Torque (N・M) 3from ₱6,985.74Min. 8 days
-
- NBK (Nabeya Bi-tech Kaisha) Ball joint (male screw) - Bolt mountingPositioning parts using balls. Attach the work piece to the screw at the tip of the ball before use. The threaded ball can be tilted up to ± 15 ° in any direction of 360 °. By tightening the fixing hexagon socket head cap screw, the adjusted angle is securely maintained. It can be attached to alu... Read MoreHolding torque (N.m) 10 Maximum Load (kg) 10 Tightening Torque (Nm) 12.5 Screw Tightening Torque (N・M) 3from ₱3,946.80Min. 8 days
- MonotaRO Rod End Lubrication Type External Right-Hand Thread TypeSince the ball and housing are in contact with each other on a spherical surface, extremely smooth rotation and sliding motion can be obtained. Since the main body is machined with screws, it is easy to install. Link mechanism for robots and transport equipment Link mechanism for machine tools, t... Read MoreChamfer Dimension r1 (mm) 0.3 Type Male screw Lubrication type Refueling type Screw direction Right-handed screw Surface Treatment (Main Unit) Zinc plating
- Osaka Spirit Rod end (lubrication male thread) left-hand thread typeA spherical plain bearing that uses a spherical inner ring with the same accuracy and hardness as a steel ball for bearings, and is used for mounting the rod end of reciprocating motion.Type Left-hand threadDiscontinued
- MonotaRO Rod end (Oil-free male thread) Left-hand thread typeA spherical plain bearing that uses a spherical inner ring with the same accuracy and hardness as a steel ball for bearings, and is used for mounting the rod end of reciprocating motion. * Do not use for anything other than its intended purpose.Dimension r (mm) 0.5 Inclination angle a (°) 13 Type Left-hand thread type Material S45C (main unit) SUJ2 (ball)Discontinued
- Osaka Spirit Rod end (lubrication male thread) right-hand thread typeAngle α (°) 13 Type Right-handed screwDiscontinued
- Osaka Spirit Rod end (Oil-free male thread) Left-hand thread typeA spherical plain bearing that uses a spherical inner ring with the same accuracy and hardness as a steel ball for bearings, and is used for mounting the rod end of reciprocating motion.Type Left-hand threadDiscontinued
- IKO (NIPPON THOMPSON) Pillow ball rod end POS (insert type with male thread)POS-EC: Zinc chromate is applied to the oil-free body, and the spherical inner ring is precision-finished after quenching and curing, and then chrome plating is applied to the spherical surface to improve corrosion resistance. The sliding surface is a maintenance-free bearing with excellent wear ... Read MoreDiscontinued
