Jaw Couplings
Other Related Pages
- MIKI PULLEY Spider (for Super Flexible Coupling)It is a special spider (buffer rubber) that is sandwiched between two hubs (couplings).Material (Spider) NBR (Nitrile Rubber) Type Related products
- TSUBAKI (Tsubakimoto Chain) Jaw Flex Coupling L Series Insert OnlyInsert for Joe Flex Coupling L series. * This product has four shapes, from shapes A to D. Please check the shape of the product you want to purchase on the registration chart before purchasing.Allowable Eccentricity (mm) 0.38 Type Related products
- Mitsuboshi Belting Hyperflex coupling MT type elastic bodyA polyurethane elastic body with excellent oil resistance and wear resistance is also available as a standard product. * This item is for coupling only. The main body is not included.Maximum Acceptable centering deviation angle α (degrees) 1 Type Other parts
- MIKI PULLEY Super-Flex Coupling Coupling Unit (AL Model)Operating Temperature Range (℃) -20~80 Allowable Deviation Angle (°) 1 Material (Main Unit) Aluminum alloy Backlash Included Type Jaw type Shaft Hole Type Key / Set screw type
- MIKI PULLEY Super-Flex Coupling (AL Model)It is a simple structure consisting of two hubs and cushioning material (spider). Since the hub is made of aluminum alloy, it is lightweight and has low customizability. Couplings can be connected and separated simply by moving in the axial direction. The structure is simple and the price is low.Operating Temperature Range (℃) -20~80 Allowable Deviation Angle (°) 1 Material (Main Unit) Aluminum alloy Suitable for General-purpose motor stepping motor Backlash Included Type Jaw type Shaft Hole Type Key / Set screw type Material (Spider) NBR (Nitrile Rubber) Standard to Conform New JIS standard compliant
- MIKI PULLEY Spaflex AL model shaft hole finished productIt is a coupling with a simple structure in which a cushioning rubber (nitrile rubber) is sandwiched between two hubs. Aluminum alloy is used for the hub material, making it lightweight. In addition, it can be easily centered by simply applying a straight edge to the outer circumference of the hu... Read MoreOperating Temperature Range (℃) -20~80 Material (Main Unit) Hub: Aluminum alloy Material (Spider) Nitrile rubberfrom ₱2,219.89Min. 12 days
- MIKI PULLEY Starflex Coupling (Element)A jaw coupling with a simple structure in which a cushioning material called an element is sandwiched between two hubs. Three types of elements with two types of hardness and two types of fitting, and three types including pilot holes. You can choose from the hub. Polyurethane elastomer is used f... Read Morefrom ₱147.61Min. 2 days
- MIKI PULLEY Spaflex coupling (AL model)The structure is simple and lightweight It has a simple structure consisting of two hubs and cushioning material (spider), and uses aluminum alloy for the hub, making it lightweight. Easy to handle Couplings can be connected and separated simply by moving in the axial direction.Material (Main Unit) Aluminum alloy Type Jaw type
- Mitsuboshi Belting Hyperflex Coupling MH Type Elastic Body* This item is an elastic body only. Coupling is not included.Maximum Acceptable centering deviation Y (mm) 0.2 Maximum Acceptable centering deviation angle α (degrees) 0.3 Maximum Acceptable centering distance Flange spacing X (mm) 1from ₱534.11Min. 6 days
- TSUBAKI (Tsubakimoto Chain) Jaw-Flex Coupling L SeriesThe design suitable for high speed and low torque corresponds to each size of general-purpose motors, and can be used in the range of up to 45kw for 4-pole motors and 110kw for 2-pole motors. Three types of S, M, and H are standardized for each size. You can select the type of insert according to... Read MoreAllowable Eccentricity (mm) 0.38 Type Jaw type
- NBK (Nabeya Bi-tech Kaisha) COUPLING CONE MJT Series MJT-30Axial Misalignment (mm) 0~+1.0 Allowable Deviation Angle (°) 1 Dimension C (mm) 1.5 Dimension B (mm) 10 Dimension L (mm) 11 Max. Shaft Hole Dia.(mm) 16 Maximum Rotation Speed (min-1[rpm]) 21000 Outer Diameter A (Φmm) 30 Overall Length W (mm) 35 Dimension F (mm) 5.5 Material (Main Unit) A2017 Size MJT-30from ₱1,479.79Min. 4 days
- NBK (Nabeya Bi-tech Kaisha) Coupling jaw type MJT-C-GRAllowable Eccentricity (mm) 0.08 Allowable Deviation Angle (°) 1 Material (Main Unit) A2017 Type Jaw type Sleeve type GRfrom ₱1,438.68Min. 5 days
- NBK (Nabeya Bi-tech Kaisha) Coupling jaw type MJT-GRAllowable Eccentricity (mm) 0.08 Allowable Deviation Angle (°) 1 Material (Main Unit) A2017 Sleeve type GR Type Set screwfrom ₱945.27Min. 5 days
- Mitsuboshi Belting Hyperflex coupling MT type-Small and large transmission torque, it can be used for all purposes. -Easy to install and maintenance-free. -A polyurethane elastic body with excellent oil resistance and wear resistance is also available as a standard product.Standard declination (degrees) 1 Type Jaw typefrom ₱2,343.24Min. 2 days
- NBK (Nabeya Bi-tech Kaisha) Capricon MJT series MJT-40CAxial Misalignment (mm) 0~+1.2 Allowable Deviation Angle (°) 1 Dimension B (mm) 12 Mass (g) 130 Dimension G (mm) 14/15.75 Maximum Rotation Speed (min-1[rpm]) 15000 Dimension C (mm) 2 Max. Shaft Hole Dia.(mm) 25 Dimension L (mm) 25 Screw Tightening Torque (N・M) 4/2.5 Outer Diameter A (Φmm) 40 Overall Length W (mm) 66 Dimension F (mm) 8.5 Material (Main Unit) A2017 Type Jaw type Thread Size M M5/M4 Allowable Torque (Nm) -from ₱2,466.59Min. 5 days
- NBK (Nabeya Bi-tech Kaisha) Capricon MJT series MJT-55KAxial Misalignment (mm) 0~+1.4 Allowable Deviation Angle (°) 1 Inertia Moment (kgm2) 1.6×10-4 Maximum Rotation Speed (min-1[rpm]) 11000 Dimension B (mm) 14 Dimension F (mm) 15 Dimension C (mm) 2 Dimension L (mm) 30 Mass (g) 310 Max. Shaft Hole Dia.(mm) 32 Outer Diameter A (Φmm) 55 Screw Tightening Torque (N・M) 7 Overall Length W (mm) 78 Material (Main Unit) A2017 Type Set screw + key Thread Size M M6 Size MJT-55Kfrom ₱3,083.35Min. 5 days
- NBK (Nabeya Bi-tech Kaisha) Coupling jaw type MJT-CK-GRAllowable Eccentricity (mm) 0.08 Allowable Deviation Angle (°) 1 Material (Main Unit) A2017 Type Jaw type Sleeve type GRfrom ₱2,014.31Min. 5 days
- TSUBAKI (Tsubakimoto Chain) Jaw Flex Coupling L Series Hub-Ideal for direct motor connection The design suitable for high speed and low torque corresponds to each size of general-purpose motors, and can be used in the range of up to 45kw for 4-pole motors and 110kw for 2-pole motors.・ Three types of S, M, and H are standardized for each size of insert ... Read MoreType Related products
- NBK (Nabeya Bi-tech Kaisha) Capricon MJT series MJT-40KAxial Misalignment (mm) 0~+1.2 Allowable Deviation Angle (°) 1 Dimension B (mm) 12 Dimension F (mm) 12.5 Mass (g) 130 Maximum Rotation Speed (min-1[rpm]) 15000 Dimension C (mm) 2 Max. Shaft Hole Dia.(mm) 25 Dimension L (mm) 25 Inertia Moment (kgm2) 3.6×10-5 Screw Tightening Torque (N・M) 4 Outer Diameter A (Φmm) 40 Overall Length W (mm) 66 Material (Main Unit) A2017 Type Set screw + key Thread Size M M5 Size MJT-40Kfrom ₱2,466.59Min. 5 days
- NBK (Nabeya Bi-tech Kaisha) Capricon MJT series MJT-20Axial Misalignment (mm) 0~+0.8 Allowable Deviation Angle (°) 1 Dimension C (mm) 1 Dimension L (mm) 10 Max. Shaft Hole Dia.(mm) 11 Outer Diameter A (Φmm) 20 Overall Length W (mm) 30 Maximum Rotation Speed (min-1[rpm]) 31000 Dimension F (mm) 5 Dimension B (mm) 8 Material (Main Unit) A2017 Size MJT-20from ₱1,191.97Min. 4 days
- MIKI PULLEY Star-Flex Coupling (Clamp Type)A jaw coupling with a simple structure in which a cushioning material called an element is sandwiched between two hubs. Three types of elements with two types of hardness and two types of fitting, and three types including pilot holes. You can choose from the hub. Polyurethane elastomer is used f... Read MoreAllowable Deviation Angle (°) 1 Material (Main Unit) Aluminum alloy Fastening type Clamp Type Jaw typefrom ₱1,603.14Min. 5 days
- Mitsuboshi Belting Chan Coupling Nomex(R) Series Elastic Body-By using a rubber elastic body, shock absorption and vibration absorption are good, quiet operation is possible, and the life of the mechanical device is extended. Also, there is no need for oil.Type Other parts Material Synthetic rubberfrom ₱1,109.74Min. 2 days
- Mitsuboshi Belting Chan coupling Nomex (R) series E type-A specially shaped compressive stress type that can withstand intense forward and reverse operation and is resistant to repeated intermittent operation. -Small size is required to obtain the same transmission torque, energy loss such as motor load can be eliminated, and cost can be reduced. -Sin... Read MoreMaterial Aluminum alloy Type Jaw typefrom ₱3,247.81Min. 7 days
- NBK (Nabeya Bi-tech Kaisha) Capricon MJT series MJT-40Axial Misalignment (mm) 0~+1.2 Allowable Deviation Angle (°) 1 Dimension B (mm) 12 Mass (g) 130 Maximum Rotation Speed (min-1[rpm]) 15000 Dimension C (mm) 2 Max. Shaft Hole Dia.(mm) 25 Dimension L (mm) 25 Outer Diameter A (Φmm) 40 Overall Length W (mm) 66 Material (Main Unit) A2017 Size MJT-40from ₱1,973.19Min. 4 days
- NBK (Nabeya Bi-tech Kaisha) Coupling jaw type MJT-K-GRAllowable Eccentricity (mm) 0.08 Allowable Deviation Angle (°) 1 Material (Main Unit) A2017 Sleeve type GR Type Set screw + keyfrom ₱1,808.73Min. 5 days
- NBK (Nabeya Bi-tech Kaisha) Capricon MJT series MJT-55CAxial Misalignment (mm) 0~+1.4 Allowable Deviation Angle (°) 1 Dimension F (mm) 10.5 Maximum Rotation Speed (min-1[rpm]) 11000 Dimension B (mm) 14 Dimension C (mm) 2 Dimension G (mm) 20/21 Dimension L (mm) 30 Max. Shaft Hole Dia.(mm) 32 Outer Diameter A (Φmm) 55 Overall Length W (mm) 78 Screw Tightening Torque (N・M) 8/4 Material (Main Unit) A2017 Type Jaw type Thread Size M M6/M5 Allowable Torque (Nm) -from ₱3,288.93Min. 5 days
- NBK (Nabeya Bi-tech Kaisha) Capricon MJT series MJT-65KAxial Misalignment (mm) 0~+1.5 Allowable Deviation Angle (°) 1 Dimension B (mm) 15 Screw Tightening Torque (N・M) 15 Dimension F (mm) 17.5 Dimension C (mm) 2.5 Inertia Moment (kgm2) 3.6×10-4 Dimension L (mm) 35 Max. Shaft Hole Dia.(mm) 38 Mass (g) 510 Outer Diameter A (Φmm) 65 Overall Length W (mm) 90 Maximum Rotation Speed (min-1[rpm]) 9000 Material (Main Unit) A2017 Type Set screw + key Thread Size M M8 Size MJT-65Kfrom ₱4,107.56Min. 5 days
- NBK (Nabeya Bi-tech Kaisha) Joe Max L075Mass (kg) 0.36 Axial Misalignment (mm) 0~+1.1 Dimension L (mm) 20.7 Max. Shaft Hole Dia.(mm) 22 Dimension n (mm) 3 Mass (g) 360 Outer Diameter A (Φmm) 44.5 Overall Length W (mm) 54.1 Screw Tightening Torque (N・M) 7 Dimension F (mm) 8 Material (Main Unit) Iron-based sintered alloy Type Jaw type Size L075 Thread Size M M6from ₱1,849.84Min. 4 days
- Mitsuboshi Belting Chan Coupling Nomex(R) Series Elastic BodyBy using a rubber elastic body, shock absorption and vibration absorption are good, quiet operation is possible, and the life of the mechanical device is extended. Also, there is no need for oil.Type Other parts Material Synthetic rubberfrom ₱1,233.09Min. 3 days
- Mitsuboshi Belting Chan coupling Nomex (R) series E typeA specially shaped compressive stress type that can withstand violent forward and reverse operation and is resistant to repeated intermittent operation. Only a small size is required to obtain the same transmission torque, energy loss such as motor load can be eliminated, and cost can be reduced.... Read MoreType Jaw typefrom ₱4,070.15Min. 3 days
- NBK (Nabeya Bi-tech Kaisha) Capricon MJT series MJT-65CAxial Misalignment (mm) 0~+1.5 Allowable Deviation Angle (°) 1 Dimension F (mm) 13 Dimension B (mm) 15 Screw Tightening Torque (N・M) 16/8 Dimension C (mm) 2.5 Dimension G (mm) 24/25 Inertia Moment (kgm2) 3.5×10-4 Dimension L (mm) 35 Max. Shaft Hole Dia.(mm) 38 Outer Diameter A (Φmm) 65 Overall Length W (mm) 90 Maximum Rotation Speed (min-1[rpm]) 9000 Material (Main Unit) A2017 Type Jaw type Thread Size M M8/M6 Allowable Torque (Nm) -from ₱5,752.23Min. 5 days
- NBK (Nabeya Bi-tech Kaisha) Capricon MJT series MJT-55Axial Misalignment (mm) 0~+1.4 Allowable Deviation Angle (°) 1 Maximum Rotation Speed (min-1[rpm]) 11000 Dimension B (mm) 14 Dimension C (mm) 2 Dimension L (mm) 30 Max. Shaft Hole Dia.(mm) 32 Outer Diameter A (Φmm) 55 Overall Length W (mm) 78 Material (Main Unit) A2017from ₱2,466.59Min. 3 days
- Mitsuboshi Belting Hyper-Flex Coupling MH Type-High flexibility and excellent impact mitigation performance. -Easy to install and maintenance-free. -The standard type can be used as a torque limiter.Standard deviation (mm) 0.2 Standard declination (degrees) 0.3 Dimension t (mm) 3(0~+1.0) Type Jaw typefrom ₱2,754.41Min. 7 days
- NBK (Nabeya Bi-tech Kaisha) Capricon MJT series MJT-30CAxial Misalignment (mm) 0~+1.0 Allowable Deviation Angle (°) 1 Dimension C (mm) 1.5 Dimension B (mm) 10 Dimension G (mm) 10/11 Dimension L (mm) 11 Max. Shaft Hole Dia.(mm) 16 Screw Tightening Torque (N・M) 2.5/1.5 Maximum Rotation Speed (min-1[rpm]) 21000 Outer Diameter A (Φmm) 30 Overall Length W (mm) 35 Dimension F (mm) 5.5 Material (Main Unit) A2017 Type Jaw type Thread Size M M4/M3 Allowable Torque (Nm) -from ₱1,849.84Min. 5 days
- NBK (Nabeya Bi-tech Kaisha) Capricon MJT series MJT-14Axial Misalignment (mm) 0~+0.6 Allowable Deviation Angle (°) 1 Dimension C (mm) 1 Outer Diameter A (Φmm) 14 Overall Length W (mm) 22 Dimension F (mm) 3.5 Maximum Rotation Speed (min-1[rpm]) 45000 Dimension B (mm) 6 Dimension L (mm) 7 Max. Shaft Hole Dia.(mm) 7 Material (Main Unit) A2017from ₱945.27Min. 2 days
- MIKI PULLEY Spaflex coupling (AL model) Key / Set screw typeIt is a simple structure consisting of two hubs and cushioning material (spider). Since the hub is made of aluminum alloy, it is lightweight and has low customizability. Couplings can be connected and separated simply by moving in the axial direction. The structure is simple and the price is low.... Read MoreOperating Temperature Range (℃) -20~80 Allowable Eccentricity (mm) 0.2 Allowable Deviation Angle (°) 1 Dimension L2 (mm) 12.2 Thread Diameter M 2-M4 Material (Main Unit) Aluminum alloy Suitable for General-purpose motor stepping motor Backlash Included Type Jaw type Material (Spider) NBR (Nitrile Rubber) Axial Misalignment (mm) ±0.5from ₱2,302.13Min. 6 days
- NBK (Nabeya Bi-tech Kaisha) Capricon MJT series MJT-30KAxial Misalignment (mm) 0~+1.0 Allowable Deviation Angle (°) 1 Dimension C (mm) 1.5 Screw Tightening Torque (N・M) 1.7 Dimension B (mm) 10 Dimension L (mm) 11 Max. Shaft Hole Dia.(mm) 16 Maximum Rotation Speed (min-1[rpm]) 21000 Outer Diameter A (Φmm) 30 Overall Length W (mm) 35 Mass (g) 43 Dimension F (mm) 5.5 Inertia Moment (kgm2) 6.1×10-6 Material (Main Unit) A2017 Type Set screw + key Thread Size M M4 Size MJT-30Kfrom ₱1,603.14Min. 5 days
- MIKI PULLEY Starflex coupling (prepared hole product)A jaw coupling with a simple structure in which a cushioning material called an element is sandwiched between two hubs. Three types of elements with two types of hardness and two types of fitting, and three types including pilot holes. You can choose from the hub. Polyurethane elastomer is used f... Read MoreAllowable Deviation Angle (°) 1 Material (Main Unit) Aluminum alloy Type Jaw typefrom ₱698.57Min. 4 days