This is the most commonly used rolling bearing. The orbital groove is an arc with a radius slightly larger than the radius of the rolling ball, and the ball and the orbit meet at a point. Deep groove ball bearings can receive radial loads, axial loads and their combined loads. Due to its simple s... Read More
Mass (kg) 0.311 Chamfer Dimension r (mm) 1 (minimum) Mounting Dimension, Maximum ra (mm) 1.0 Inner Diameter d (Φmm) 100 Mounting Dimension, Minimum da (mm) 105 Mounting Dimension, Maximum Da (Φmm) 120 Outer Diameter D (Φmm) 125 Width B (mm) 13 Basic Dynamic Load Rating (N) 19600 Basic Static Load Rating (N) 21200 Type Both non-contact seal type Allowable Rotation Speed (min -1 [rpm]) Grease lubrication: 4600 Material High carbon chromium bearing steel
This is the most commonly used rolling bearing. The orbital groove is an arc with a radius slightly larger than the radius of the rolling ball, and the ball and the orbit meet at a point. Deep groove ball bearings can receive radial loads, axial loads and their combined loads. Due to its simple s... Read More
Mass (kg) 0.006 Chamfer Dimension r (mm) 0.3 (minimum) Basic Static Load Rating (N) 1040 Inner Diameter d (Φmm) 12 Basic Dynamic Load Rating (N) 1920 Outer Diameter D (Φmm) 21 Width B (mm) 5 Type Double contact seal type Allowable Rotation Speed (min -1 [rpm]) Grease lubrication: 20000 Material High carbon chromium bearing steel
This is the most commonly used rolling bearing. The orbital groove is an arc with a radius slightly larger than the radius of the rolling ball, and the ball and the orbit meet at a point. Deep groove ball bearings can receive radial loads, axial loads and their combined loads. Due to its simple s... Read More
Mass (kg) 0.517 Mounting Dimension, Maximum ra (mm) 1.0 Chamfer Dimension r (mm) 1.1 (minimum) Mounting Dimension, Maximum Da (Φmm) 113 Outer Diameter D (Φmm) 120 Width B (mm) 18 Basic Static Load Rating (N) 29600 Basic Dynamic Load Rating (N) 32000 Inner Diameter d (Φmm) 85 Mounting Dimension, Minimum da (mm) 91 Type Double contact seal type Allowable Rotation Speed (min -1 [rpm]) Grease lubrication: 2600 Material High carbon chromium bearing steel
This is the most commonly used rolling bearing. The orbital groove is an arc with a radius slightly larger than the radius of the rolling ball, and the ball and the orbit meet at a point. Deep groove ball bearings can receive radial loads, axial loads and their combined loads. Due to its simple s... Read More
Mass (kg) 0.327 Chamfer Dimension r (mm) 1 (minimum) Mounting Dimension, Maximum ra (mm) 1.0 Outer Diameter D (Φmm) 100 Width B (mm) 16 Basic Static Load Rating (N) 21100 Basic Dynamic Load Rating (N) 23700 Inner Diameter d (Φmm) 70 Mounting Dimension, Minimum da (mm) 75 Mounting Dimension, Maximum Da (Φmm) 95 Type Both non-contact seal type Allowable Rotation Speed (min -1 [rpm]) Grease lubrication: 6500 Material High carbon chromium bearing steel
This is the most commonly used rolling bearing. The orbital groove is an arc with a radius slightly larger than the radius of the rolling ball, and the ball and the orbit meet at a point. Deep groove ball bearings can receive radial loads, axial loads and their combined loads. Due to its simple s... Read More
Mass (kg) 0.155 Mounting Dimension, Maximum ra (mm) 0.6 Chamfer Dimension r (mm) 0.6 (minimum) Width B (mm) 10 Outer Diameter D (Φmm) 100 Basic Dynamic Load Rating (N) 12700 Basic Static Load Rating (N) 13300 Inner Diameter d (Φmm) 80 Mounting Dimension, Minimum da (mm) 84 Mounting Dimension, Maximum Da (Φmm) 96 Type Both non-contact seal type Allowable Rotation Speed (min -1 [rpm]) Grease lubrication: 6000 Material High carbon chromium bearing steel
This is the most commonly used rolling bearing. The orbital groove is an arc with a radius slightly larger than the radius of the rolling ball, and the ball and the orbit meet at a point. Deep groove ball bearings can receive radial loads, axial loads and their combined loads. Due to its simple s... Read More
Mass (kg) 0.771 Mounting Dimension, Maximum ra (mm) 1.0 Chamfer Dimension r (mm) 1.1 (minimum) Inner Diameter d (Φmm) 100 Mounting Dimension, Minimum da (mm) 106 Mounting Dimension, Maximum Da (Φmm) 134 Outer Diameter D (Φmm) 140 Width B (mm) 20 Basic Static Load Rating (N) 36500 Basic Dynamic Load Rating (N) 42500 Type Both non-contact seal type Allowable Rotation Speed (min -1 [rpm]) Grease lubrication: 4400 Material High carbon chromium bearing steel
This is the most commonly used rolling bearing. The orbital groove is an arc with a radius slightly larger than the radius of the rolling ball, and the ball and the orbit meet at a point. Deep groove ball bearings can receive radial loads, axial loads and their combined loads. Due to its simple s... Read More
Mass (kg) 0.265 Chamfer Dimension r (mm) 1 (minimum) Mounting Dimension, Maximum ra (mm) 1.0 Mounting Dimension, Maximum Da (Φmm) 105 Outer Diameter D (Φmm) 110 Width B (mm) 13 Basic Dynamic Load Rating (N) 18700 Basic Static Load Rating (N) 19000 Inner Diameter d (Φmm) 85 Mounting Dimension, Minimum da (mm) 90 Type Double contact seal type Allowable Rotation Speed (min -1 [rpm]) Grease lubrication: 2750 Material High carbon chromium bearing steel
This is the most commonly used rolling bearing. The orbital groove is an arc with a radius slightly larger than the radius of the rolling ball, and the ball and the orbit meet at a point. Deep groove ball bearings can receive radial loads, axial loads and their combined loads. Due to its simple s... Read More
Mass (kg) 0.125 Mounting Dimension, Maximum ra (mm) 0.6 Chamfer Dimension r (mm) 0.6 (minimum) Width B (mm) 10 Basic Static Load Rating (N) 11500 Basic Dynamic Load Rating (N) 11900 Inner Diameter d (Φmm) 65 Mounting Dimension, Minimum da (mm) 69 Mounting Dimension, Maximum Da (Φmm) 81 Outer Diameter D (Φmm) 85 Type Double contact seal type Allowable Rotation Speed (min -1 [rpm]) Grease lubrication: 3750 Material High carbon chromium bearing steel
This is the most commonly used rolling bearing. The orbital groove is an arc with a radius slightly larger than the radius of the rolling ball, and the ball and the orbit meet at a point. Deep groove ball bearings can receive radial loads, axial loads and their combined loads. Due to its simple s... Read More
Mass (kg) 0.517 Mounting Dimension, Maximum ra (mm) 1.0 Chamfer Dimension r (mm) 1.1 (minimum) Mounting Dimension, Maximum Da (Φmm) 113 Outer Diameter D (Φmm) 120 Width B (mm) 18 Basic Static Load Rating (N) 29600 Basic Dynamic Load Rating (N) 32000 Inner Diameter d (Φmm) 85 Mounting Dimension, Minimum da (mm) 91 Type Both non-contact seal type Allowable Rotation Speed (min -1 [rpm]) Grease lubrication: 5200 Material High carbon chromium bearing steel
This is the most commonly used rolling bearing. The orbital groove is an arc with a radius slightly larger than the radius of the rolling ball, and the ball and the orbit meet at a point. Deep groove ball bearings can receive radial loads, axial loads and their combined loads. Due to its simple s... Read More
Mass (kg) 0.008 Chamfer Dimension r (mm) 0.3 (minimum) Basic Static Load Rating (N) 1570 Inner Diameter d (Φmm) 17 Outer Diameter D (Φmm) 26 Basic Dynamic Load Rating (N) 2630 Width B (mm) 5 Type Double contact seal type Allowable Rotation Speed (min -1 [rpm]) Grease lubrication: 15000 Material High carbon chromium bearing steel
Miniature ball bearings have a nominal bearing outer diameter of D <9 mm, and small ball bearings have a nominal bearing inner diameter of d <10 mm and a nominal bearing outer diameter of D ≥ 9 mm. There are metric type and inch type. Most commonly used seal-shield bearings have a width of ... Read More
This is the most commonly used rolling bearing. The orbital groove is an arc with a radius slightly larger than the radius of the rolling ball, and the ball and the orbit meet at a point. Deep groove ball bearings can receive radial loads, axial loads and their combined loads. Due to its simple s... Read More
Mass (kg) 0.54 Mounting Dimension, Maximum ra (mm) 1.0 Chamfer Dimension r (mm) 1.1 (minimum) Mounting Dimension, Maximum Da (Φmm) 119 Outer Diameter D (Φmm) 125 Width B (mm) 18 Basic Static Load Rating (N) 31500 Basic Dynamic Load Rating (N) 33000 Inner Diameter d (Φmm) 90 Mounting Dimension, Minimum da (mm) 96 Type Both non-contact seal type Allowable Rotation Speed (min -1 [rpm]) Grease lubrication: 5000 Material High carbon chromium bearing steel
This is the most commonly used rolling bearing. The orbital groove is an arc with a radius slightly larger than the radius of the rolling ball, and the ball and the orbit meet at a point. Deep groove ball bearings can receive radial loads, axial loads and their combined loads. Due to its simple s... Read More
Mass (kg) 0.005 Chamfer Dimension r (mm) 0.3 (minimum) Inner Diameter d (Φmm) 10 Outer Diameter D (Φmm) 19 Basic Dynamic Load Rating (N) 2120 Width B (mm) 5 Basic Static Load Rating (N) 985 Type Double contact seal type Allowable Rotation Speed (min -1 [rpm]) Grease lubrication: 24000 Material High carbon chromium bearing steel
This is the most commonly used rolling bearing. The orbital groove is an arc with a radius slightly larger than the radius of the rolling ball, and the ball and the orbit meet at a point. Deep groove ball bearings can receive radial loads, axial loads and their combined loads. Due to its simple s... Read More
Mass (kg) 0.04 Mounting Dimension, Maximum ra (mm) 0.3 Chamfer Dimension r (mm) 0.3 (minimum) Inner Diameter d (Φmm) 45 Mounting Dimension, Minimum da (mm) 47 Basic Static Load Rating (N) 4900 Basic Dynamic Load Rating (N) 5350 Mounting Dimension, Maximum Da (Φmm) 56 Outer Diameter D (Φmm) 58 Width B (mm) 7 Type Both non-contact seal type Allowable Rotation Speed (min -1 [rpm]) Grease lubrication: 11000 Material High carbon chromium bearing steel
Mounting Dimension, Maximum ra (mm) 0.3 Chamfer Dimension r (mm) 0.3 (minimum) Width B (mm) 5 Type Both non-contact seal type Material High carbon chromium bearing steel
This is the most commonly used rolling bearing. The orbital groove is an arc with a radius slightly larger than the radius of the rolling ball, and the ball and the orbit meet at a point. Deep groove ball bearings can receive radial loads, axial loads and their combined loads. Due to its simple s... Read More
Mass (kg) 0.567 Mounting Dimension, Maximum ra (mm) 1.0 Chamfer Dimension r (mm) 1.1 (minimum) Mounting Dimension, Minimum da (mm) 101 Mounting Dimension, Maximum Da (Φmm) 124 Outer Diameter D (Φmm) 130 Width B (mm) 18 Basic Dynamic Load Rating (N) 33500 Basic Static Load Rating (N) 33500 Inner Diameter d (Φmm) 95 Type Both non-contact seal type Allowable Rotation Speed (min -1 [rpm]) Grease lubrication: 4700 Material High carbon chromium bearing steel
Miniature ball bearings have a nominal bearing outer diameter of D <9 mm, and small ball bearings have a nominal bearing inner diameter of d <10 mm and a nominal bearing outer diameter of D ≥ 9 mm. There are metric type and inch type. Most commonly used seal-shield bearings have a width of ... Read More
Seal Double shield type (resin seal) Flange Without flange
This is the most commonly used rolling bearing. The orbital groove is an arc with a radius slightly larger than the radius of the rolling ball, and the ball and the orbit meet at a point. Deep groove ball bearings can receive radial loads, axial loads and their combined loads. Due to its simple s... Read More
Mass (kg) 0.106 Mounting Dimension, Maximum ra (mm) 0.3 Chamfer Dimension r (mm) 0.3 (minimum) Width B (mm) 10 Basic Static Load Rating (N) 10600 Basic Dynamic Load Rating (N) 11500 Inner Diameter d (Φmm) 60 Mounting Dimension, Minimum da (mm) 62 Mounting Dimension, Maximum Da (Φmm) 76 Outer Diameter D (Φmm) 78 Type Both non-contact seal type Allowable Rotation Speed (min -1 [rpm]) Grease lubrication: 4000 Material High carbon chromium bearing steel
This is the most commonly used rolling bearing. The orbital groove is an arc with a radius slightly larger than the radius of the rolling ball, and the ball and the orbit meet at a point. Deep groove ball bearings can receive radial loads, axial loads and their combined loads. Due to its simple s... Read More
Mass (kg) 0.298 Chamfer Dimension r (mm) 1 (minimum) Mounting Dimension, Maximum ra (mm) 1.0 Mounting Dimension, Minimum da (mm) 100 Mounting Dimension, Maximum Da (Φmm) 115 Outer Diameter D (Φmm) 120 Width B (mm) 13 Basic Dynamic Load Rating (N) 19300 Basic Static Load Rating (N) 20500 Inner Diameter d (Φmm) 95 Type Both non-contact seal type Allowable Rotation Speed (min -1 [rpm]) Grease lubrication: 5000 Material High carbon chromium bearing steel
This is the most commonly used rolling bearing. The orbital groove is an arc with a radius slightly larger than the radius of the rolling ball, and the ball and the orbit meet at a point. Deep groove ball bearings can receive radial loads, axial loads and their combined loads. Due to its simple s... Read More
Mass (kg) 0.280 Chamfer Dimension r (mm) 1 (minimum) Mounting Dimension, Maximum ra (mm) 1.0 Mounting Dimension, Maximum Da (Φmm) 110 Outer Diameter D (Φmm) 115 Width B (mm) 13 Basic Dynamic Load Rating (N) 19000 Basic Static Load Rating (N) 19700 Inner Diameter d (Φmm) 90 Mounting Dimension, Minimum da (mm) 95 Type Both non-contact seal type Allowable Rotation Speed (min -1 [rpm]) Grease lubrication: 5300 Material High carbon chromium bearing steel
This is the most commonly used rolling bearing. The orbital groove is an arc with a radius slightly larger than the radius of the rolling ball, and the ball and the orbit meet at a point. Deep groove ball bearings can receive radial loads, axial loads and their combined loads. Due to its simple s... Read More
Mass (kg) 0.345 Chamfer Dimension r (mm) 1 (minimum) Mounting Dimension, Maximum ra (mm) 1.0 Mounting Dimension, Maximum Da (Φmm) 100 Outer Diameter D (Φmm) 105 Width B (mm) 16 Basic Static Load Rating (N) 19700 Basic Dynamic Load Rating (N) 20800 Inner Diameter d (Φmm) 75 Mounting Dimension, Minimum da (mm) 80 Type Both non-contact seal type Allowable Rotation Speed (min -1 [rpm]) Grease lubrication: 6200 Material High carbon chromium bearing steel
This is the most commonly used rolling bearing. The orbital groove is an arc with a radius slightly larger than the radius of the rolling ball, and the ball and the orbit meet at a point. Deep groove ball bearings can receive radial loads, axial loads and their combined loads. Due to its simple s... Read More
Mass (kg) 0.083 Chamfer Dimension r (mm) 0.3 (minimum) Inner Diameter d (Φmm) 55 Outer Diameter D (Φmm) 72 Basic Static Load Rating (N) 8100 Basic Dynamic Load Rating (N) 8800 Width B (mm) 9 Type Double contact seal type Material High carbon chromium bearing steel
This is the most commonly used rolling bearing. The orbital groove is an arc with a radius slightly larger than the radius of the rolling ball, and the ball and the orbit meet at a point. Deep groove ball bearings can receive radial loads, axial loads and their combined loads. Due to its simple s... Read More
Mass (kg) 0.033 Mounting Dimension, Maximum ra (mm) 0.3 Chamfer Dimension r (mm) 0.3 (minimum) Inner Diameter d (Φmm) 40 Mounting Dimension, Minimum da (mm) 42 Basic Static Load Rating (N) 4900 Mounting Dimension, Maximum Da (Φmm) 50 Outer Diameter D (Φmm) 52 Basic Dynamic Load Rating (N) 5950 Width B (mm) 7 Type Both non-contact seal type Allowable Rotation Speed (min -1 [rpm]) Grease lubrication: 12000 Material High carbon chromium bearing steel
This is the most commonly used rolling bearing. The orbital groove is an arc with a radius slightly larger than the radius of the rolling ball, and the ball and the orbit meet at a point. Deep groove ball bearings can receive radial loads, axial loads and their combined loads. Due to its simple s... Read More
Basic Dynamic Load Rating (N) 123000 Mounting Dimension, Maximum Da (Φmm) 158 Outer Diameter D (Φmm) 170 Mounting Dimension, Maximum ra (mm) 2.0 Chamfer Dimension r (mm) 2.1 (minimum) Mass (kg) 3.59 Width B (mm) 39 Inner Diameter d (Φmm) 80 Basic Static Load Rating (N) 86500 Mounting Dimension, Minimum da (mm) 92 Material High carbon chromium bearing steel Type Single shield type
Miniature ball bearings have a nominal bearing outer diameter of D <9 mm, and small ball bearings have a nominal bearing inner diameter of d <10 mm and a nominal bearing outer diameter of D ≥ 9 mm. There are metric type and inch type. Most commonly used seal-shield bearings have a width of ... Read More
Flange Without flange Seal Double shield type (steel plate seal)
This is the most commonly used rolling bearing. The orbital groove is an arc with a radius slightly larger than the radius of the rolling ball, and the ball and the orbit meet at a point. Deep groove ball bearings can receive radial loads, axial loads and their combined loads. Due to its simple s... Read More
Mass (kg) 0.280 Chamfer Dimension r (mm) 1 (minimum) Mounting Dimension, Maximum ra (mm) 1.0 Mounting Dimension, Maximum Da (Φmm) 110 Outer Diameter D (Φmm) 115 Width B (mm) 13 Basic Dynamic Load Rating (N) 19000 Basic Static Load Rating (N) 19700 Inner Diameter d (Φmm) 90 Mounting Dimension, Minimum da (mm) 95 Type Double contact seal type Allowable Rotation Speed (min -1 [rpm]) Grease lubrication: 2650 Material High carbon chromium bearing steel
This is the most commonly used rolling bearing. The orbital groove is an arc with a radius slightly larger than the radius of the rolling ball, and the ball and the orbit meet at a point. Deep groove ball bearings can receive radial loads, axial loads and their combined loads. Due to its simple s... Read More
Mass (kg) 0.007 Chamfer Dimension r (mm) 0.3 (minimum) Basic Static Load Rating (N) 1260 Inner Diameter d (Φmm) 15 Basic Dynamic Load Rating (N) 2080 Outer Diameter D (Φmm) 24 Width B (mm) 5 Type Double contact seal type Allowable Rotation Speed (min -1 [rpm]) Grease lubrication: 16000 Material High carbon chromium bearing steel
Miniature ball bearings have a nominal bearing outer diameter of D <9 mm, and small ball bearings have a nominal bearing inner diameter of d <10 mm and a nominal bearing outer diameter of D ≥ 9 mm. There are metric type and inch type. Most commonly used seal-shield bearings have a width of ... Read More
Flange With flange Seal Double shield type (steel plate seal)
This is the most commonly used rolling bearing. The orbital groove is an arc with a radius slightly larger than the radius of the rolling ball, and the ball and the orbit meet at a point. Deep groove ball bearings can receive radial loads, axial loads and their combined loads. Due to its simple s... Read More
Mass (kg) 0.125 Mounting Dimension, Maximum ra (mm) 0.6 Chamfer Dimension r (mm) 0.6 (minimum) Width B (mm) 10 Basic Static Load Rating (N) 11500 Basic Dynamic Load Rating (N) 11900 Inner Diameter d (Φmm) 65 Mounting Dimension, Minimum da (mm) 69 Mounting Dimension, Maximum Da (Φmm) 81 Outer Diameter D (Φmm) 85 Type Both non-contact seal type Allowable Rotation Speed (min -1 [rpm]) Grease lubrication: 7500 Material High carbon chromium bearing steel
This is the most commonly used rolling bearing. The orbital groove is an arc with a radius slightly larger than the radius of the rolling ball, and the ball and the orbit meet at a point. Deep groove ball bearings can receive radial loads, axial loads and their combined loads. Due to its simple s... Read More
Mass (kg) 0.145 Mounting Dimension, Maximum ra (mm) 0.6 Chamfer Dimension r (mm) 0.6 (minimum) Width B (mm) 10 Basic Dynamic Load Rating (N) 12500 Basic Static Load Rating (N) 12800 Inner Diameter d (Φmm) 75 Mounting Dimension, Minimum da (mm) 79 Mounting Dimension, Maximum Da (Φmm) 91 Outer Diameter D (Φmm) 95 Type Both non-contact seal type Allowable Rotation Speed (min -1 [rpm]) Grease lubrication: 6500 Material High carbon chromium bearing steel
Yaskawa Electric PC connection cable for Σ-Ⅴ / Σ-7 seriesRoHS directive (corresponding to 10 substances) Correspondence
