Wire Connectors & Terminals
What is a terminal/sleeve? A terminal is a part for connecting electric wires. There are various types. There are many types such as R type, CE type, Y type and E type. For example, a round terminal (R type) is a bare crimp terminal with a round contact surface and mounting holes for screw fixing. A sleeve is a part used for wiring. There are S-type, E-type, B-type, P-type, etc. Some have guides to help you connect them properly. If you have a guide, you can make a secure connection.
Other Related Pages
- TRUSCO Plug-in connection terminal with insulation coatingContact insulation type.Mass (g) 30 Type Plug-in connection terminal Operating Temperature Range (℃) -40~+105 Rated Voltage (V) 300 Terminal Shape Plug-in type Material (Insulator) Nylon Mass (g/pack) 30 Material (connector) Brass C2600 (electric tin plating)from ₱534.11Min. 2 days
- NICHIFU Crimp terminal with insulation coating (TME R type) round nylonThe TME type has a wire insertion guide (funnel shape) inside the insulation coating. Even if the core wire is not twisted, it can be smoothly inserted to the cylinder along the guide with the coating stripped. Furthermore, since the TME type has a terminal stopper wall on the insulator, the term... Read MoreType Insulated crimp terminal Operating Temperature Range (℃) -40~+105 Rated Voltage (V) 300 Terminal Shape Round type Material (Insulator) Nylon JIS Standard Conforms to JIS C 2805 Flame Retardance UL94V-2 UL Standard Certification Included CSA Standard Certification Included Feature Flame retardantfrom ₱945.27Min. 2 days
- NICHIFU Ring Terminal for Copper Wire (R Type) without InsulationSucceeded in increasing only the hardness of the terminal tongue (contact part). It is harder to bend than conventional terminals. *For copper wire only. *Please use within the wire connection range. *Please use the specified applicable crimp tool.Type Bare crimp terminal
- NICHIFU Crimp Terminal for Copper Wire (Y Type) Fork Spade Type without InsulationType Bare crimp terminal Terminal Shape Open tip type
- NICHIFU Terminal Insulation Sleeve* When used for EP rubber insulated wires, there is a risk of discoloration.Operating Temperature Range (℃) 60(MAX) Rated Voltage (V) 600 Material (Insulator) PVC
- MonotaRO Closed End Connector CE Type with Insulation Coating* Twist the wire before crimping. * Check the type of closed end connector before crimping. * Not a JIS standard product.Material Nylon 66 Color Milky white Type Insulated crimp terminal Terminal Shape Closed end connector Material (Inside) Copper sleeve
- MonotaRO Bare Ring Terminal for Copper WireAs a wiring terminal * Please use a crimping tool suitable for the terminal.Type Bare crimp terminal Terminal Shape Round (R type) Material (Terminal) Copper
- NICHIFU Closed End Connector with Insulation Coating (CE Type)JIS standard product UL / CSA registered product JIS C 2807Color White Type Insulated crimp terminal Operating Temperature Range (℃) -40~+105 Rated Voltage (V) 300 Terminal Shape Closed end connector Material (Insulator) Nylon JIS Standard JIS C 2807 Flame Retardance UL94V-2
- MonotaRO Solderless Terminal Spade Type Copper SleevesAs a wiring terminal. * Please use a crimping tool suitable for the terminal.Type Bare crimp terminal Terminal Shape Open tip type Material (Terminal) Copper
- NICHIFU Crimping Sleeve for Copper Wire (E Type) Ring Sleeve without InsulationJIS standard product JIS C 2806 * Please use in the box. Please use JIS standard tools for ring sleeves.Type Bare crimp sleeve JIS Standard JIS C 2806 RoHS directive (corresponding to 10 substances) Correspondence Sleeve Shape Ring sleeve
- NICHIFU Plug-In Wire ConnectorNew shape that allows "visual confirmation" of the wire insertion status 2-point contact spring structure
- MonotaRO Insulation CapIt can be distinguished by the insulation and color of the terminals. As a wiring terminal. * Do not use for any purpose other than its intended purpose.Type Insulation cap for bare crimp terminals Material PVC Rated Voltage (V) 600
- WAGO JAPAN One-Touch Connector WFR SeriesA new mechanism that uses a cage clamp (R) spring method. Safe and secure with a transparent housing. Mixed use of single wire, stranded wire, and strand wire is OK. One-touch connection with soft lever operation. PSE mark acquisition product. In addition to indoor wiring, it can be used for wiri... Read MoreColor Body / transparent Lever / orange Type Plug-in wire connector Material (Housing) Heat resistant polycarbonate Material (Spring) stainless steel
- MonotaRO Insulated Butt Splice Connectors StraightThe transparent cover increases the reliability of the connection. As a wiring terminal * Please refrain from using it for any other purpose.Material Vinyl chloride Color Transparent Type Crimping sleeve with insulation coating Rated Voltage (V) 300 Sleeve Shape For butt (B type)
- NICHIFU For Copper Wire Bare Crimp Sleeve (B Type)For matching *For copper wire only. *Please use within the wire connection range. *Please use the specified applicable crimp tool.Type Bare crimp sleeve JIS Standard - Sleeve Shape For matching
- Phoenix Contact Sleeve Insulated Ferrule Terminals AIPhoenix Contact's bar terminals with insulating sleeves are made of flexible copper and have a tin-plated surface. This rod terminal has a high insulation effect even if the wires are densely packed during wiring. It also prevents the core wire from coming apart. The insulation sleeves are co... Read MoreMaterial E-CU Surface Treatment Tin plating Heat Resistance Temperature (℃) (Long time) 105, (Short time) 120 Material (Sleeve) Polypropylene Sleeve Shape Ring sleeve
- MonotaRO Ring sleeve E typeIt is a JIS standard product. For wiring connection work * Please do not use for any other purpose.JIS Standard JIS C 2806 Material (Terminal) Oxygen-free copper
- MonotaRO Fully Insulated Male Bullet ConnectorAs a wiring terminal. * Please refrain from using it for any other purpose. * There is no compatibility with the old product number. Although the part number of the Monotaro plug-in type pin terminal starts with MAE, only male and female are compatible.Material Nylon / brass Operating Temperature Range (℃) ‐10~+105 Rated Voltage (V) 300 Flame Retardance UL94 V-2
- MonotaRO Crimp terminal with open-ended insulation coatingAs a wiring terminal. * Please refrain from using it for any other purpose.Rated Voltage (V) 600 Terminal Shape Open tip type Material (Insulator) Vinyl chloride Material (Terminal) Copper
- NICHIFU Pin Terminal for Copper Wire (TC Type) without Insulation* For copper wire only. * Please use within the range of wire conjugation. * Please use the specified applicable crimping tool.Type Bare crimp terminal Terminal Shape Rod shape
- WAGO JAPAN One-touch Push-in ConnectorOne-touch connection of single wire / stranded wire by lever operation! A new mechanism that uses a cage clamp spring. Single wire / stranded wire mixed use OK One-touch connection by lever operation! Various power supplies, in-board relay, joint box, downlight, etc. * Insufficient insertion may ... Read MoreColor Body/Gray Lever/Orange Type Plug-in wire connector Rated Voltage (V) 300/400 Rated Current (A) 20/32 Material (Housing) Heat resistant 66 nylon Material (Spring) stainless steel
- FUJI TERMINAL INDUSTRY Non-Insulated Ring Terminals for Copper Wire (R Type)Type Bare crimp terminal Material (Terminal) / Finish Oxygen-free copper / tin plating
- JAPPY Plug-in connectorSimply strip the wire coating and plug it into the connector to connect.
- TRUSCO Ring Crimp Terminal without InsulationA bare crimp terminal with a round contact surface (tongue) and mounting holes for fixing screws. Used to connect annealed stranded wires.Color Silver Type Bare crimp terminal Terminal Shape Round (R type)
- NICHIFU Non-Insulated Butt Connectors for Copper Wire (P Type)For overlaying * For copper wire only. * Please use within the range of wire conjugation. * Please use the specified applicable crimping tool.Type Bare crimp sleeve UL Standard Certification Included CSA Standard Certification Included Sleeve Shape For overlay
- NICHIFU Crimping Sleeve with Insulation Coating (B Type) TM*For copper wire only. *Please use the compatible crimping tool specified by the manufacturer. *Please use within the wire connection range.Type Crimp sleeve with insulation Operating Temperature Range (℃) -40~+105 Rated Voltage (V) 300 Material (Insulator) Nylon Flame Retardance UL94V-2 CSA Standard Certification Included Feature Flame retardant Sleeve Shape For matching
- SHINAGAWA SHOKO TCV SleeveIdeal for insulation of terminals crimped to vinyl wires and color-coded display. There are 6 color variations. It is a RoHS directive compliant product. For insulating cap for terminals. (As of January 2023) Due to the change in the packaging unit, sales of stock items will be gradually disconti... Read MoreMaximum Operating Temperature (℃) 60
- MonotaRO Crimp terminal Round type With insulation coatingAs a wiring terminal. * Please refrain from using it for any other purpose.Rated Voltage (V) 600 Terminal Shape Round type Material (Insulator) Nylon
- MonotaRO Crimp sleeve, waterproof typeThe waterproof crimp sleeve uses a shrink tube for the insulation coating. After crimping, it shrinks by heating with a heat gun, etc., and has a dustproof and waterproof effect. For places where waterproof, oil-proof, earthquake-proof, dust-proof, etc. are required. * Please refrain from using i... Read MoreMaterial Polyolefin / Copper Operating Temperature Range (℃) -40~+105 Rated Voltage (V) 600 Shrinkage Completion Temperature (℃) 150
- MonotaRO Terminal SetFrequently used crimp terminals and connectors are set in a transparent case that is easy to carry. For wiring work * Please refrain from using it for any other purpose.
- DAIDO SOLDERLESS TERMINAL MFG. (DST) Ring Terminal for Copper Wire (R Type) without InsulationType Bare crimp terminal
- MonotaRO Bare crimp sleeve P type for superposition copper wire* Do not use for anything other than its intended purpose.Material Copper Type Bare crimp sleeve Sleeve Shape For overlay
- J.S.T. Mfg. Ring Terminal Vinyl Insulated (Straight Type)Absorbs the "elongation" of the insulator during crimping and maintains a uniform wall thickness. The insulation coating is a straight type (uniform thickness).Type Insulated crimp terminal Rated Voltage (V) 600 Terminal Shape Round type Material (Insulator) PVC Flame Retardance UL94 V-0 Material (Terminal) Oxygen-free copper
- WAGO JAPAN Insulated Ferrules with Plastic CollarType Insulated crimp terminal Terminal Shape Rod terminal
- Ubon Insulation cap (for crimp terminal) TIC seriesTIC series is an insulating cap for crimp terminalsMaterial Vinyl chloride Rated Voltage (V) 600 Maximum Operating Temperature (℃) 60 (for general use)
- NICHIFU Blade Terminal (BT Type) S Type without Insulation* For copper wire only. Please use within the wire conjugation range. Please use the specified applicable crimping tool.Type Bare crimp terminal Terminal Shape Plate type JIS Standard Certification None UL Standard Certification Included CSA Standard Certification Included
- MonotaRO Bare crimp sleeve B type For butt use For copper wireAs a wiring terminal. * Please refrain from using it for any other purpose.Material Copper Type Bare crimp sleeve Sleeve Shape For butt (B type)
- MonotaRO Pin Terminal with Insulating Sleeve* Do not use for anything other than its intended purpose.Type Insulated crimp terminal Terminal Shape Rod shape Material (Insulator) Nylon Heat Resistance Temperature (℃) 105 Material (Terminal) Copper
- NICHIFU Insulated Sleeves (B Type)Type Crimp sleeve with insulation Operating Temperature Range (℃) -40~+75 Rated Voltage (V) 300 Material (Insulator) PVC JIS Standard Certification None UL Standard Certification None CSA Standard Certification Included Sleeve Shape For matching