Weld Cleaning Cloths
- Nitty-Gritty Dedicated clothIt has excellent durability against acid and heat, is hard to cut, and has a very long life. Workability is improved without the need for frequent cloth replacement. Can be used on any machine. Please cut it to the desired length and use it. Please use the cloth with a rubber band. Burn-out cloth... Read MoreDimension (m) 2.5 Width (mm) 35 RoHS directive (corresponding to 10 substances) Correspondence
- Chemical Yamamoto Shiner series mopPurely domestically produced, one by one. We also support custom-made products. * For separately shipped items, if you order by cash on delivery, it will be shipped the next day or later. Select the mop to apply to the electrodes.from ₱2,877.76Min. 2 days
- SASAKI CHEMICAL Stainless steel welding burn remover Espure SJ gel (low viscosity type)A gel-type welding burn remover. Welding burns can be removed by applying, wiping and rinsing. It does not correspond to poisonous or deleterious substances. For welding burn-off of stainless steelAcidic / Alkaline Water soluble Specification Room temperature use Type Soft gel type
- Jay International CB cloth for electrolyzerUses Zylon developed by Toyobo. It has the best heat resistance and abrasion resistance among organic fibers. Please use a utility knife when cutting.
- MIGHT INDUSTRY Ring cross (small) 100 piecesContent 100 sheets Width x Length (mm) 35×50 RoHS directive (corresponding to 10 substances) Correspondencefrom ₱16,442.59Min. 2 days
- MIGHT INDUSTRY Super felt set for scaler (45 sheets + 4 rings)It is a kind of cloth that is absolutely necessary when using the Might Scaler, and it is attached to the tip of the torch holder and used to soak the electrolytic solution and electrolyze. It is a necessary product to prevent short circuits. It has a long life and low running cost. When using Mi... Read MoreTrusco Part No. 351-7985 Dimensions, Thickness x Width W x Length L (mm) (Felt) 2 x 35 x 90 Mass (g) 52 Set Contents 45 felts, 4 O-ringsfrom ₱18,498.43Min. 2 days
- MIGHT INDUSTRY Glass cloth bag type for scalerWidth x Length (mm) 50×50 RoHS directive (corresponding to 10 substances) Correspondencefrom ₱18,909.59Min. 2 days
- MIGHT INDUSTRY Glass cloth for scalerIt is a kind of cloth that is absolutely necessary when using the Might Scaler, and it is attached to the tip of the torch holder and used to soak the electrolytic solution and electrolyze. It is a necessary product to prevent short circuits. It wears out quickly, but the cost is low. A non-asbes... Read MoreMass (kg) 1.6 Length (m) 40 Width (mm) 50 Trusco Part No. 351-7951from ₱19,731.93Min. 2 days
- Ichinen Chemicals (Former Taiho Kohzai) Cap mop (small)Specification Fingertip of work glovesfrom ₱7,396.90Min. 2 days
- MIGHT INDUSTRY Super Cross Single (10M)RoHS directive (corresponding to 10 substances) Correspondencefrom ₱16,442.59Min. 6 days
- MIGHT INDUSTRY Cap cross (W) 60 sheetsRoHS directive (corresponding to 10 substances) Correspondencefrom ₱16,442.59Min. 5 days
- Ichinen Chemicals (Former Taiho Kohzai) Techno mop (small) 40 sheetsUsed in acidic electrolyte, burn-off / polishing mode. Used when the plate tip (small) is attached.Dimension (mm) 40×50from ₱16,442.59Min. 5 days
- MIGHT INDUSTRY Ring cross (large) 80 sheetsWidth x Length (mm) 50×50 Content 80 sheets RoHS directive (corresponding to 10 substances) Correspondencefrom ₱16,442.59Min. 4 days
- MIGHT INDUSTRY Cap cross (S) 80 sheetsRoHS directive (corresponding to 10 substances) Correspondencefrom ₱16,442.59Min. 4 days
- MIGHT INDUSTRY 25 super cap clothsContent 25 sheets RoHS directive (corresponding to 10 substances) Correspondencefrom ₱19,731.93Min. 4 days
- MIGHT INDUSTRY Super ring cloth (small) 25 sheetsWidth x Length (mm) 35×50 RoHS directive (corresponding to 10 substances) Correspondencefrom ₱19,731.93Min. 4 days
- MIGHT INDUSTRY Glass cloth (50M)Width x Length (mm) 50×50000 RoHS directive (corresponding to 10 substances) Correspondence Shape rollfrom ₱16,442.59Min. 4 days
- Ichinen Chemicals (Former Taiho Kohzai) Techno mop (large) 30 sheetsUsed in acidic electrolyte, burn-off / polishing mode. Used when the plate tip (large) is attached.Dimension (mm) 65×65from ₱16,442.59Min. 5 days
- Jay International F crossSince it uses a felt that has excellent heat resistance and chemical resistance, it has an excellent soft feeling and is an excellent cloth for electropolishing that is excellent for electrolyzing mirror surface materials.Length (m) 10from ₱6,574.57Min. 10 days
- Ichinen Chemicals (Former Taiho Kohzai) Glass clothSuitable Material Glassfrom ₱11,097.41Min. 5 days
- Toei Kogyo Cloth for Removing SUS BurnsDurability is dramatically improved by high-density felting of highly durable super fiber, which is also used in the cloth spacesuit that is attached to the electrode of the burn removal device. Excellent insulation, acid resistance, heat resistance, and flame resistance. Reduces the frequency of... Read MoreWidth (mm) 40 Fabric feltfrom ₱9,452.74Min. 4 days
- Ichinen Chemicals (Former Taiho Kohzai) Glass cloth tape mop (large) 50mmx30mUsed in neutral electrolyte, acid electrolyte, and burn-off mode.Dimensions (mm x m) 50×30from ₱12,330.91Min. 5 days
- Ichinen Chemicals (Former Taiho Kohzai) 200 cap mops (small)Neutral electrolyte, used in burn-off mode. Used when mounting a ship-shaped tipSize Fingertip of work glovesfrom ₱8,219.24Min. 5 days
- ESCO 35mmx2.5m Welding and burn-out cloth* Cut to the desired length before use. * Please fix the cloth with a rubber band.Dimensions, W (mm) x L (m) 35×2.5 Esco Part No. EA315SN-35from ₱18,909.59Min. 6 days
- MIGHT INDUSTRY Glass cloth bag type (150) for scalerIt is a kind of cloth that is absolutely necessary when using the Might Scaler, and it is attached to the tip of the torch holder and used to soak the electrolytic solution and electrolyze. It is a necessary product to prevent short circuits. It wears out quickly, but the cost is low. A non-asbes... Read MoreMass (kg/sheet) 0.009 Mass (kg) 1.35 Trusco Part No. 351-7969 Width x Length (mm) 50×50 Mass (g/sheet) 9 Shape Bag type (double weave)Discontinued