Magnetic Welding Squares
A welding magnet is a welding product used to hold and fix the material to be assembled or welded. The material is made of steel, aluminum, iron, etc. and has a strong magnet. Since the material to be welded can be temporarily fixed or held at 45 ° or 90 °, both hands can be used freely. Items used in construction sites where welding work is performed, such as steel construction work that assembles steel frames and processes steel sheets. You can choose according to the application, such as those that are fixed at 45 ° or 90 °, those that can be set freely, and those that have an on / off switch that can be easily mounted and removed.
Other Related Pages
- TRUSCO Magnewelder for weldingSuitable for stable holding by combining joints when welding iron plates, round pipes, and iron balls. For temporary holding and temporary assembly work during welding work.Dimension (mm) 102×162×16 Attracting Force (N) 147 Trusco Part No. 232-7074 Holding angle (°) 45、90 Mass (g) 560 Specification Ferrite magnet Material SS400
- Shinwa Rules Welding MagnetConvenient shape of 45 ° and 90 °. Adsorbs with a strong magnetic force. Anisotropic magnet For temporary fixing of welding workMaterial Iron・ABS resin
- Magswitch Welding Magnet Ground ClampBy adopting a heat dissipation fin shape, heating is prevented and the suction force of the magnet is protected. There is no need to attach a tab plate during welding. Just set it on the work surface and turn on the switch to easily ground it.
- TRUSCO Welding magnetA welding magnet that can hold angles at 30 °, 60 °, and 90 °. Comes with a hole that can be easily removed with a screwdriver when removing. For temporary attachment and temporary assembly of welding and assembly work.Material Magnet: Neodymium magnet, Body: Steel 2018 Trusco page 7 0328from ₱904.16Min. 2 days
- TRUSCO Welding magnetIt is a welding magnet that supports a large number of holding angles while being a convenient size. For temporary attachment and temporary assembly of welding and assembly work.Holding angle (°) 30、60、45、90 Material (Main Unit) Steel
- TRUSCO Magnet Hexagon Holder (with Switch)With ON / OFF switch. Easy to install or remove in position. The angle of use can be 45 °, 90 °, and 135 °. With a groove, it is stable even for round objects. Welding, assembly, parts processing, etc.
- TRUSCO Hex bolt magnet holder (neodymium magnet)A neodymium magnet is built into the head, and even though it is small, it exerts a powerful magnet and attracts it. It is possible to use the existing tap holes or install from the front direction. Easy to install and suitable for tight spaces. For mounting on products and jigs and for suction p... Read MoreMaterial (Magnet) Neodymium magnet Maximum Operating Temperature (℃) 80 Surface Treatment Electroless nickel plating Material (Case) Iron (SUM, no quenching)
- Magswitch Mag SquareSince it has a strong suction force on the bottom and sides, various fixing methods are possible. Suitable for fixing and positioning the work. A jig can be attached to the screw hole and used as a magnet base for the sensor holding base of scientific instruments.
- TRUSCO Welding magnet with auxiliary plateWelding magnet with auxiliary plate. The "third magnet" makes it easier to perform face-to-face welding. For temporary attachment and temporary assembly of welding and assembly work.Holding angle (°) 30、60、45、90 Material (Main Unit) Steel
- SK (Niigata Seiki) Magneweler for weldingWork efficiency is improved by using both hands For temporary holding of welding work, assembly work, temporary fixing, temporary assembly when assembling steel products, etc.from ₱1,233.09Min. 2 days
- TRUSCO Welding magnet V padDespite its mini size, it holds the workpiece securely with a strong magnetic force, and by adjusting the angle, it can handle an extremely diverse welding scene. For temporary attachment and temporary assembly of welding and assembly work.Attracting Force (N) 80 Material (Main Unit) Steelfrom ₱1,973.19Min. 2 days
- Magswitch Mag JigA small and powerful commercial magnet. Also for hanging price display boards and POP panels at stores. Although it is small and lightweight, it exerts a strong adsorption force and holds the object strongly.
- Magswitch Mini angleOne tool can handle a wide range of angles, which is useful for temporary welding work. Ideal for holding the angle of steel plates.Mass (kg) 0.2 Dimension b (mm) 32 Dimension a (mm) 54 Dimension c (mm) 60 Holding Power Up to 40kg
- TRUSCO Magnewelder for weldingSuitable for stable holding by combining joints when welding iron plates, round pipes, and iron balls. For temporary holding and temporary assembly work during welding work.Attracting Force (N) 147 Trusco Part No. 232-7066 Holding angle (°) 45、90 Mass (g) 460 Dimension (mm) 95×111×16 Specification Ferrite magnet Material SS400from ₱1,479.79Min. 2 days
- TRUSCO Magnewelder for weldingWith ON / OFF switches on both ends, it is convenient because the magnet can be turned ON / OFF on two suction surfaces. When welding iron plates and iron balls, the joints are combined to maintain stability. Used for temporary attachment and temporary assembly in welding and assembly work. For t... Read MoreDimension (mm) 195×195×47 Mass (kg) 2.75 Mass (g) 2750 Trusco Part No. 284-8911 Attracting Force (N) 660 Holding angle (°) 90 With ON-OFF function Material Steel, aluminumfrom ₱26,310.61Min. 2 days
- Magswitch 300A grounded mini multi-angleSupports a wide range of angles with one tool, and the 300A grounded mini multi-angle can hold the angle and ground at the same time. Ideal for holding the angle of steel plates. Useful for temporary welding work.Mass (kg) 0.4 Dimension b (mm) 42 Dimension a (mm) 86 Dimension c (mm) 91 Holding Power Up to 67 kgfrom ₱4,518.73Min. 2 days
- TRUSCO Magnewelder for welding with off leverSuitable for stable holding by combining joints when welding iron plates, round pipes, and iron balls. It can be easily removed by the off lever. For temporary holding and temporary assembly work during welding work.Trusco Part No. 232-7112 Dimension (mm) 305×305×39 Mass (kg) 4.9 Mass (g) 4900 Holding angle (°) 90 With off lever Attracting Force (N) 980 Specification Ferrite magnet Material SS400
- TRUSCO Magnewelder standard type for weldingSuitable for stable holding by combining joints when welding iron plates, round pipes, and iron balls. Standard 90 ° fixed holding type. For temporary holding and temporary assembly work during welding work.Mass (kg) 2.1 Mass (g) 2100 Dimension (mm) 230×230×20 Trusco Part No. 232-7104 Attracting Force (N) 588 Holding angle (°) 90 Specification Ferrite magnet Material SS400from ₱6,574.57Min. 2 days
- TRUSCO Welding magnet V pad longMaterial Magnet: Neodymium magnet, Body: Steel Width (mm) 163~238 Attracting Force (N) 80 Mass (kg) 0.6 Height (mm) 50 Trusco Part No. 115-1168 Length (mm) 50from ₱2,713.29Min. 2 days
- TRUSCO Magnewelder for welding fixed typeSuitable for stable holding by combining joints when welding iron plates, round pipes, and iron balls. Wide and firm fixing is possible. For temporary holding and temporary assembly work during welding work.Mass (kg) 1.5 Dimension (mm) 145×145×36 Mass (g) 1500 Trusco Part No. 232-7091 Attracting Force (N) 245 Holding angle (°) 90 Specification Ferrite magnet Material SS400
- Magswitch mag mountIdeal as a holding base for sensors, etc., and as a base for welding rails. A lever is attached to the side of the main body, and a jig device can be attached to the upper part of the main body.from ₱7,396.90Min. 6 days
- Magswitch Hand lifter 60MYou can also use it by attaching the attached screws and fixing the handle at a right angle. Suitable for transporting small steel plates and steel materials that are heavy enough to be held by hand. * When using for transportation, consider a safety factor of at least 4: 1 for the maximum holdin... Read MoreMass (kg) 0.6 Dimension b (mm) 134 Dimension a (mm) 140 Dimension c (mm) 60 Holding Power Up to 106 kgfrom ₱12,330.91Min. 2 days
- TRUSCO Welding magnet Mag tabThe strong magnetic force holds the workpiece securely and can be used in a wide variety of welding scenes. For temporary attachment and temporary assembly of welding and assembly work. * TMTBL is a set containing two symmetrical TMTBS.Dimensions, Width W x Depth D x Height H (mm) 100×32×76 Attracting Force (N) 80 Material (Main Unit) Steel
- Magswitch singleWork safety is improved because it can be transported without being angular or directly touching hot workpieces. Suitable for transporting small steel plates and steel materials that are heavy enough to be held by hand. * When using for transportation, consider a safety factor of at least 4: 1 fo... Read MoreDimension b (mm) 123 Dimension c (mm) 97from ₱11,097.41Min. 6 days
- Magswitch Mug wheelThe entire wheel is a magnet, and the device can be moved while it is attracted to an iron plate or pipe. Suitable for fixing equipment such as positioning guides, steel plate feed, and pipe transportation. Also on the wheels of self-propelled devices.from ₱12,330.91Min. 6 days
- Magswitch MagudleySince there is a certain distance between the object to be transported and the handle, it prevents workers from being injured by dropping the object. A transport tool that attaches a lifting magnet to the tip hook to easily transport heavy objects. Suitable for transporting cured steel sheets and... Read MoreDimension a (mm) 917 Mass (kg) 9.4 Dimension b (mm) 1826 Dimension c (mm) 343from ₱27,544.11Min. 6 days
- Magswitch Mini Multi AngleOne tool can handle a wide range of angles, which is useful for temporary welding work. Ideal for holding the angle of steel plates.Mass (kg) 0.2 Dimension b (mm) 32 Dimension a (mm) 66 Dimension c (mm) 72 Holding Power Up to 40kgfrom ₱3,206.70Min. 6 days
- TRUSCO Snake magnetA unique welding magnet product with a flexible shaft that allows the workpiece to be held at any angle. The V-pad magnet at the tip can also hold round materials. For temporary attachment and temporary assembly of welding and assembly work.Dimension (mm) (Flat pad) 110 × 50 Material (Magnet) Neodymium magnet Flexible part (mm) (Shaft) 450 Mass (kg) 0.6 Attracting Force (N) 60 Trusco Part No. 818-3843 Included Accessories Clip for tip option Material (Main Unit) Steelfrom ₱2,836.64Min. 32 days
- KANETEC Magnet holderIt is a combination of two magnets, and the angle can be set freely. For temporary holding of drilling machines and assembly work. As a simple jig for welding work instead of a thin plate hinge.Holding angle (°) Anyfrom ₱5,341.07Min. 2 days
- SK (Niigata Seiki) Magneweler for weldingFor temporary holding and temporary fixing of welding work and assembly workMaterial Alnico magnetfrom ₱3,247.81Min. 4 days
- TRUSCO Steel plate welding magnetA magnet holder for welding that securely holds sheet metal, etc. with a strong magnet. With a handle, it is easy to remove. For temporary attachment and temporary assembly of welding and assembly work.Material (Magnet) Ferrite Mass (kg) 1 Attracting Force (N) 450 Trusco Part No. 799-3722 Diameter (mm) x Height (mm) 85×140 Material (Main Unit) Steelfrom ₱6,574.57Min. 2 days
- Magswitch Mag Square AngleThe position of the magnets on both ends can be adjusted. Holds firmly even for large to small size workpieces. Ideal for holding steel plates and pipes at right angles. Useful for temporary welding work.from ₱14,386.75Min. 21 days
- Magswitch Magsquare UHMagnet tools are sensitive to heat and may cause a decrease in magnetic force in an environment exceeding 80 ° C. The new technology "Heat-resistant UH series" can be used in environments up to 180 ° C by improving the housing.from ₱7,808.07Min. 6 days
- TRUSCO Snake magnetA unique welding magnet product with a flexible shaft that allows the workpiece to be held at any angle. The V-pad magnet at the tip can also hold round materials. For temporary attachment and temporary assembly of welding and assembly work.Material (Magnet) Neodymium magnet Flexible part (mm) (Shaft) 305 Dimension (mm) (V pad) 65 x 35 Mass (kg) 0.5 Attracting Force (N) 80 Trusco Part No. 818-3842 Included Accessories Clip for tip option Material (Main Unit) Steelfrom ₱3,576.75Min. 32 days
- Magswitch Pipet angleThe scale is engraved at 5 ° intervals, and the angle can be easily changed by simply turning the shaft lever. Ideal for holding workpieces that require various angle settings. The angle can be set from 22 ° to 270 °.Mass (kg) 1.6 Dimension a (mm) 146 Dimension c (mm) 230 Dimension b (mm) 42 Holding Power Up to 90kgfrom ₱17,676.09Min. 5 days
- KANETEC Magnet holder (strong type) heat resistance 180 ° CLength (mm) 66 Attracting Force (N) 980 Trusco Part No. 125-6733 Width (mm) 50.2 Height (mm) 44from ₱10,686.24Min. 5 days
- Magswitch Boomer AngleThe angle of the magnets on both ends can be adjusted. Holds both flat and curved surfaces strongly. Ideal for heavy pipe and steel sheet setups. Welding from either the inside or the outside is possible.from ₱27,955.28Min. 6 days
- TRUSCO Magnewelder for weldingSuitable for stable holding by combining joints when welding iron plates, round pipes, and iron balls. For temporary holding and temporary assembly work during welding work.Trusco Part No. 232-7058 Mass (g) 270 Holding angle (°) 30、45、60、75、90 Dimension (mm) 65×98×14 Attracting Force (N) 98 Specification Ferrite magnet Material SS400from ₱1,479.79Min. 2 days