Made of plastic that is resistant to shock and humidity (water). For wearing a helmet. The window opens and closes up and down. Can be widely used from MP type helmets to grooved type helmets.
* Shading plate and protective plate are sold separately. * Some helmets cannot be used.
Suitable for (Helmet): MP type, baseball cap type Heat Resistance Temperature (℃) 100 Applicable plate 105×50mm Dimensions (H x W x D) (mm) 250×240×230 Mass (g) 315 Type Helmet type Material Polypropylene
Fix the bracket to the security cap, insert the bracket on the welded surface, and attach it. Opening and closing window type. Made of fiber, it is resistant to heat. Hand-held round surface C type Uses the same fiber (1.0 mm thick laminated board) as KuRo.
* Lens and bracket are sold separately.
Dimensions, Height H x Width W x Depth D (cm) 34×22×14 Mass (g) 440 Material (Main Unit) Vulcanized fiber Type Welding surface (cover type)
Welded surface used by attaching a metal fitting to a security cap (MP type, baseball cap type, American type can be used). Since the window opens and closes, the welded part can be confirmed without moving the welded surface up and down. Because it is a soft type plastic, it is weak against heat... Read More
Dimensions, Height H x Width W x Depth D (cm) 34×22×15 Mass (g) 360 Material (Main Unit) Polypropylene resin Type Welding surface (cover type)
It is made of plastic that is light and durable, and is not easily deformed by water or heat. Uses a resin surface spring that makes it easy to replace the plate. ANSI Z87.1 compliant product.
For arc welding work.
* Shading plate and protective plate are sold separately. Make sure that the plate... Read More
Mass (g) 350 Facepiece Dimensions, Width x Length (mm) 400×300 Trusco Part No. 415-3171 Standard ANSI compliant Type Welding surface (cover type) Material Polypropylene
Fix the bracket to the security cap, insert the bracket on the welded surface, and attach it. Opening and closing window type. Made of fiber, it is resistant to heat. Moreover, since the material contains a vinyl material, it is water resistant. Uses the same fiber (thickness 1.2 mm) as the H-sha... Read More
Dimensions, Height H x Width W x Depth D (cm) 34×22×14 Mass (g) 440 Material (Main Unit) Pasco (water resistant) Type Welding surface (cover type)
A light-shielding double disaster prevention surface that can be used for welding and fusing work. It is a light-shielding disaster prevention surface that blocks infrared rays. ANSI Z87 + compliant product.
For welding and fusing work from shading degree # 8 (TBM-500W) to # 11 (TBM-503W). (At t... Read More
Mass (g) 380 2018 Trusco page 7 0348 Type Cover type Shade No. Front plate # 9
Resin welded surface with little deformation due to water leakage. A slide-in method that does not require a separate metal fitting to attach the helmet.
* Glass is not included. It may not be attached depending on the type of helmet.
Suitable for (Helmet): MP type, baseball cap type Plate (Recommended) 108mm x 51mm (ANSI) Mass (g) 310 Body dimensions (H x W x D) (mm) 311×241×208 RoHS directive (corresponding to 10 substances) Correspondence Type Welding surface (cover type) Material plastic
A light-shielding double disaster prevention surface that can be used for welding and fusing work. It can be attached to a helmet without mounting brackets. It is a light-shielding disaster prevention surface that blocks infrared rays. ANSI Z87 + compliant product.
Recommended for simple welding... Read More
Use by attaching a bracket to the security cap (MP type, baseball cap type, American type) No light enters because there is no revetting. Since the windows are fixed, it is a little lighter than the openable type. Because it is a soft type plastic, it is weak against heat and easily melts, but it... Read More
Mass (g) 300 Dimensions, Height H x Width W x Depth D (cm) 34×22×15 Material (Main Unit) Polypropylene resin Type Welding surface (cover type)
A light-shielding double disaster prevention surface that can be used for welding and fusing work. It is a light-shielding disaster prevention surface that blocks infrared rays. ANSI Z87 + compliant product.
For welding and fusing work with shading degrees # 8 to # 11. (At the time of double alig... Read More
Plate Dimensions (mm) (Front plate) 25 x 97 x 140 Material (Headgear) Plastic Dimensions, Vertical x Horizontal x Depth (mm) 210×145×75 Material (Facepiece) Polycarbonate (PC) resin Mass (g) 320 Type Helmet mounting
It is a light-shielding surface that can be attached to a helmet that can be worn with a mask. The chin rest is removed and stainless steel is used so that the mask can be worn under the light-shielding surface.
Cover surface for welding
* Lens is sold separately. * The bracket on the helmet side... Read More
Mass (g) 430 Size (mm) Approximately 340 x 200 x 170 Type Welding surface (cover type)
Light and durable. It does not deform even when it gets wet with water. Completely waterproof. Even if left in the rain, it will not be deformed. The lightness is outstanding. There is almost no feeling of fatigue even during long hours of continuous work. I don't get tired of my eyes. The bl... Read More
Applicable plate 105×50mm Material Fiber Color Blue Body dimensions (H x W x D) (mm) 350×240×160
Light and durable. It does not deform even when it gets wet with water. Completely waterproof. Even if left in the rain, it will not be deformed. The lightness is outstanding. There is almost no feeling of fatigue even during long hours of continuous work. I don't get tired of my eyes. The bl... Read More
Applicable plate 105×50mm Body dimensions (H x W x D) (mm) 350×240×190 Color Blue Material Fiber
It is used by attaching it to an MP type helmet. The window opens and closes up and down.
For MP
* Glass is not included.
Body dimensions (H x W x D) (mm) 345×230×160 Material Fiber Mass (g) 455 Type Opening window type Sight Glass Dimensions, Width x Height (mm) 90×40 Specification water resistant