The facet is made of nylon, which has better heat resistance than ABS and polypropylene, is not easily deformed by heat, and is light and durable. By turning the knob on the back side, you can expand the head circumference up to 60 cm. By turning the knobs on both sides, you can raise only the su... Read More
Dimensions, Height x Width (mm) About 300 × 250 Type Welding surface (cover type) Applicable plate Outside 50 × 105mm / Inside 90 × 110mm Head Circumference (cm) Up to about 60 Shade No. ♯10 included (outside)
It is made of plastic that is light and durable, and is not easily deformed by water or heat. Uses a resin surface spring that makes it easy to replace the plate. ANSI Z87.1 compliant product.
Arc welding work.
* Shading plate and protective plate are sold separately. ● Make sure that the plates... Read More
Trusco Part No. 300-0915 Mass (g) 350 Dimensions, Height x Width (mm) 400×300 Material Polypropylene (PP) Type Welding surface (cover type)
Mask wearing type. The chin rest has been removed and stainless steel is used so that the mask can be worn under the light-shielding surface.
* Lens sold separately.
Dimensions, Height H x Width W x Depth D (cm) 34×22×14 Mass (g) 425 Material (Main Unit) Pasco (water resistant) Type Welding surface (cover type)
Made of plastic that is resistant to shock and moisture (water)! Head direct mounting type. Face contact soft touch.
* Shading plate and protective plate are sold separately.
Applicable plate 105×50mm Dimensions (H x W x D) (mm) 300×230×200 Mass (g) 380 Type Headband type Material plastic
For work that generates high-speed flying objects and general flying objects from the front and side, for gas welding, fusing peripheral work, and furnace front work
For work that generates high-speed flying objects and general flying objects from the front and side, for gas welding, fusing peripheral work, and furnace front work
-You can work easily with one hand. -You can easily adjust it according to the size of your head just by turning the handle on the back.・ With a convenient lens! (Glass lens shading degree # 11)
For welding work.
* Please lower the shield when welding.
Headband type light-shielding cover surface for welding that has a light-shielding plate attached and can be used immediately. The inner protective plate (transparent) and the outer shading degree # 11 plate are already installed and ready to use. The outer window opens and closes up and down (* ... Read More
Mass (g) About 440 Size Free size (adjustable) Type Welding surface (cover type)
A light-shielding double disaster prevention surface that can be used for welding and fusing work. It is a light-shielding disaster prevention surface that blocks infrared rays. ANSI Z87 + compliant product.
For welding and fusing work with shading degrees # 8 to # 11. (At the time of double alig... Read More
Plate Dimensions (mm) (Front plate) 25 x 97 x 140 Material (Headgear) Plastic Dimensions, Vertical x Horizontal x Depth (mm) 210×145×75 Mass (g) 380 Material (Facepiece) Polycarbonate (PC) resin Type Straight
Helmet-mounted disaster prevention surface.
* Please note that this colored disaster prevention surface does not correspond to the appropriate light-shielding protective equipment for blocking harmful light rays stipulated in the "Industrial Safety and Health Act". * Please do not use t... Read More
Thickness (mm) 2 Mass (g) 265 Material Acrylic Mounting method Gear band type Color Green Type Welding surface (cover type) Specification With shading plate
Direct wear type disaster prevention aspect.
* Please note that this colored disaster prevention surface does not correspond to the appropriate light-shielding protective equipment for blocking harmful light rays stipulated in the "Industrial Safety and Health Act". * Please do not use ... Read More
Thickness (mm) 2 Mass (g) 330 Material Acrylic Mounting method Gear band type Type Welding surface (cover type) Specification With shading plate Color yellow
Helmet-mounted disaster prevention surface.
* Please note that this colored disaster prevention surface does not correspond to the appropriate light-shielding protective equipment for blocking harmful light rays stipulated in the "Industrial Safety and Health Act". * Please do not use t... Read More
Thickness (mm) 2 Mass (g) 265 Material Acrylic Mounting method Gear band type Type Welding surface (cover type) Specification With shading plate Color yellow
Helmet-mounted disaster prevention surface.
* Please note that this colored disaster prevention surface does not correspond to the appropriate light-shielding protective equipment for blocking harmful light rays stipulated in the "Industrial Safety and Health Act". * Please do not use t... Read More
Thickness (mm) 2 Mass (g) 200 Material Acrylic Mounting method Gear band type Color Green Type Welding surface (cover type)
You can choose your favorite helmet surface from 4 colors. Since it is made from Pasco, it is lightweight, has excellent durability, and has excellent water resistance, so it can be used for rainy weather work.
Used as a welding helmet surface during welding.
Dimensions, Width W x Height H x Depth D (mm) 230×360×250 Mass (g) 470 Material Face: Pasco, Headgear: PE Included Accessories Raw glass plate # 10 Type helmet
Direct wear type disaster prevention aspect.
* Please do not use this disaster prevention surface for welding / fusing work, work under bright light, work with laser light, etc. for shading. * It does not have the ability to protect the eyes from X-rays, other radiation, harmful rays and laser ra... Read More
Thickness (mm) 2 Mass (g) 330 Material Acrylic Color Clear Mounting method Gear band type Type Welding surface (cover type) Specification With shading plate
Helmet-mounted disaster prevention surface.
* Please note that this colored disaster prevention surface does not correspond to the appropriate light-shielding protective equipment for blocking harmful light rays stipulated in the "Industrial Safety and Health Act". * Please do not use t... Read More
Thickness (mm) 2 Mass (g) 200 Material Acrylic Mounting method Gear band type Type Welding surface (cover type) Color yellow
Helmet-mounted disaster prevention surface.
* Please do not use this disaster prevention surface for welding / fusing work, work under bright light, work with laser light, etc. for shading. * It does not have the ability to protect the eyes from X-rays, other radiation, harmful rays and laser ray... Read More
Thickness (mm) 2 Mass (g) 200 Material Acrylic Color Clear Mounting method Gear band type Type Welding surface (cover type)
Direct wear type disaster prevention aspect.
* Please note that this colored disaster prevention surface does not correspond to the appropriate light-shielding protective equipment for blocking harmful light rays stipulated in the "Industrial Safety and Health Act". * Please do not use ... Read More
Thickness (mm) 2 Mass (g) 330 Material Acrylic Mounting method Gear band type Color Green Type Welding surface (cover type) Specification With shading plate
Direct wear type disaster prevention aspect.
* Please note that this colored disaster prevention surface does not correspond to the appropriate light-shielding protective equipment for blocking harmful light rays stipulated in the "Industrial Safety and Health Act". * Please do not use ... Read More
Thickness (mm) 2 Mass (g) 265 Material Acrylic Mounting method Gear band type Type Welding surface (cover type) Color yellow
Included Accessories Elementary glass / shading plate (# 10) Lens Size (mm) 95×40mm Main Unit Dimensions 230(W)×258(D)×360(H)mm Type Welding surface Mass (g) 550
Direct wear type disaster prevention aspect.
* Please do not use this disaster prevention surface for welding / fusing work, work under bright light, work with laser light, etc. for shading. * It does not have the ability to protect the eyes from X-rays, other radiation, harmful rays and laser ra... Read More
Thickness (mm) 2 Mass (g) 265 Material Acrylic Color Clear Mounting method Gear band type Type Welding surface (cover type)
904 series (formerly 304 series) A direct helmet type that does not require a helmet. Plastic band disaster prevention surface that is hard to adjust the size due to the unevenness of the back of the head. A square lens with a flat front.
Dimensions (Width W x Height H) (mm) 250×200 Mass (g) About 280 Lens Shape Square Type Welding surface (cover type)
A replacement band for band-type fittings that can be worn directly. A band made of Surupura that can be adjusted by turning the dial.
NSG / NPA Welding Helmet Gear Band
904 series (formerly 304 series) A direct helmet type that does not require a helmet. Plastic band disaster prevention surface that is hard to adjust the size due to the unevenness of the back of the head. A square lens with a flat front. With W plate.
Dimensions (Width W x Height H) (mm) 250×200 Mass (g) About 340 Lens Shape Square Type Welding surface (cover type)
904 series (formerly 304 series) A direct helmet type that does not require a helmet. Gear band type disaster prevention surface that can be easily adjusted in size with one hand. A square lens with a flat front. With W plate
Dimensions (Width W x Height H) (mm) 250×200 Mass (g) About 350 Lens Shape Square Type Welding surface (cover type)
904 series (formerly 304 series) A direct helmet type that does not require a helmet. Gear band type disaster prevention surface that can be easily adjusted in size with one hand. A square lens with a flat front.
Dimensions (Width W x Height H) (mm) 250×200 Mass (g) About 290 Lens Shape Square Type Welding surface (cover type)
Made of vulcanized fiber with strength, durability and insulation. Durable, hard-to-break and lightweight fiber paper. It is especially suitable for electric welding because it does not easily conduct electricity due to its excellent insulation.
Welding / fusing work