Welding Helmets & Goggles
Welding surface and light-shielding glasses are welding equipment to prevent eyes and face from strong light and heat generated during welding. The hand-held welded surface is also used in factory and DIY work. Shading glasses range from easy-to-use items to those that can be worn on top of the glasses for full-scale welding. In addition, the automatic welding shading surface used for welding at the factory can be clearly seen at normal times, but it is automatically shielded when strong light such as arc light is detected. The big point is that you can use both hands because it is a wearable type.
Other Related Pages
TRUSCO Covering surface for welding Sweat padA sweat pad for the cover surface for welding.Trusco Part No. 415-3146 Mass (g) 12 Type Covering surface for welding Suitable Model TSM20S/TSM25S4- KOKEN Sakaki type disaster prevention surface 35 type greenThis type is used when working near a dazzling light source. It is used to protect the face from flying objects, powder droplets, and chemical / solvent droplets. * Cannot be used for a protective cap with a wide brim. Since it is not a JIS standard product, we have not tested the degree of shading.Mass (g) About 210 Dimension (mm) About 265 × 205 Material Acrylic RoHS directive (corresponding to 10 substances) Correspondence Type Helmet mounting typefrom ₱1,973.19Min. 2 days
- Riken Chemical Disaster prevention 350-MDimension (mm) 215×250×2 Mass (g) 225 Material (Lens) Acrylic Type Cylindrical type Lens Color Green (G2)from ₱1,890.96Min. 8 days
- UVEX Shading Goggles Ultrasonic Flip UpA flip-up type that can block light only when needed. A gray lens with excellent color recognition performance. With a soft frame, you won't get tired even if you use it for a long time. You can work safely with a wide field of view. High quality and durable anti-fog and anti-scratch coating ... Read More2018 Trusco page 7 0361 Lens Color Gray Type Shading gogglesfrom ₱6,163.40Min. 3 days
- MonotaRO Colored Glass Welding LensDIN standard shading glass As a light-shielding plate during welding work. * Do not use for anything other than its intended purpose. * Please use with the optional transparent cover plate.Dimensions, Width x Length x Thickness (mm) 105×50×2.5 Dimension (mm) 50×105
- MonotaRO Welding Safety GlassesWith UV385 (99.9% cut) function. The lens is hardened and has excellent scratch resistance. Can be used with glasses. Shading degrees # 2 and # 3 are for indoor and outdoor use. Use # 5 (for gas welding) / # 10 (for electric welding) during welding work. * # 10 is a light-shielding performance th... Read MoreMass (g) 44 Standard ANSI compliant Function Can be used with glasses Material Polycarbonate Type Shading glasses
- MonotaRO Outer protection plate For automatic welding shading surfaceAutomatic welding light-shielding surface This is an outer protective plate for solar type (AS-2, M3000F (M / 4)). * Do not use for anything other than its intended purpose.Dimension (mm) 90×110
- MonotaRO Cover surface for weldingThe facet is made of nylon, which has better heat resistance than ABS and polypropylene, is not easily deformed by heat, and is light and durable. By turning the knob on the back side, you can expand the head circumference up to 60 cm. By turning the knobs on both sides, you can raise only the su... Read MoreDimensions, Height x Width (mm) About 300 × 250 Type Welding surface (cover type) Applicable plate Outside 50 × 105mm / Inside 90 × 110mm Head Circumference (cm) Up to about 60 Shade No. ♯10 included (outside)
- MonotaRO Welding helmetA polypropylene welded surface that is strong against impact and moisture. * Glass is not included.Sight Glass Dimensions, Width x Height (mm) About 100 x about 40 Mass (g) About 260 Facepiece Dimensions, Width x Length (mm) Approx. 250 x 295 Material Made of polypropylene Type Welding surface (hand-held)
- MonotaRO Spatter prevention plate Polycarbonate TransparentMade of impact-resistant and light polycarbonate, more and more people are switching from plain glass to prevent spatter. * Do not use for anything other than its intended purpose.Dimensions, Width x Length x Thickness (mm) About 108 x about 51 x about 2 Dimension (mm) About 108 x about 51 x about 2 Specification Polycarbonate Material (Lens) Polycarbonate Color Transparent
- Riken Chemical Hand-held welding surfaceStandard type of hand-held welded surface. The wooden handle makes it non-slip and easy to fit in your hand. * Glass is not included.Material (Main body) Fiber, (Hand-held part) Wood Mass (g) 276 Body dimensions (H x W x D) (mm) 310×225×120 Sight Glass Dimensions, Width x Height (mm) 90×40 Type Welding surface (hand-held) Color Green Specification water resistant
- Riken Chemical Welding plate glass (DIN standard)DIN standard productThickness (mm) 2.5～2.9 Dimension (mm) 50×105 Specification DIN standard product Material Glass Color Green
- Seiko Seisakusho Welding surface Round surface H typeSince the material is vinyl processed fiber, it is resistant to water. * Glass is not included.Mass (g) 300 Dimensions (H x W x D) (mm) 310×240×120 Sight Glass Dimensions, Width x Height (mm) About 90 x about 40 Type Welding surface (hand-held) Specification Non-JIS standard Color Red
- STAR ELECTRIC MANUFACTURING (SUZUKID) Eyeborg Alpha IIUses cartridges that have acquired German Industrial Standards (DIN) certification. Designed with an emphasis on total balance so that the center of gravity of the cartridge, facepiece, and headgear is kept constant. TIG / MIG / MAG / Hand bar welding / cutting / polishingShade No. #9～#13 Shading speed (seconds) 1/25000 Dimension (mm) 240×305×207 Mass of Main Unit (g) 528 Field of View 98×44mm Power Supply AAA battery x solar battery
- TRUSCO Color glass for weldingIt is a low-priced type that emphasizes cost. It is scratch resistant. The higher the shading number, the darker the color. DIN EN166 standard product. For arc welding.Dimensions, Height x Width x Thickness (mm) 50×105×3 Material / Finish Glass Suitable Model HS、TPW-T、TPW-K
- TRUSCO Raw glass pack for weldingA low-priced type that emphasizes cost. A cover lens for light-shielding glass. * There is a tolerance of 2 to 3 mm.Thickness (mm) 2.0 Trusco Part No. 228-2836 Dimensions, Height x Width (mm) 50×105 Mass (g/pack) 66 Mass (g) 66 Material / Finish Glass Suitable Model HS、TPW-T、TPW-K Remark Packed
- MonotaRO Inner protection plate For automatic welding light shielding surface (AS-2 series)An inner protective plate exclusively for the automatic welding light-shielding surface solar type (AS-2 series). * Do not use for anything other than its intended purpose.Dimension (mm) 47×103×1 Suitable for AS-2 AS-2-F shared Material Polycarbonate
- YAMAMOTO (Yamamoto Kogaku) JIS shading plate NSLScratch-proof, heat-resistant, UV / infrared cut tempered glass plate. Eye protection during gas welding / cutting peripheral work, work in front of a high-heat furnace, etc.Dimensions (Width W x Height H) (mm) 105×50 Mass (g) 34 Material Glass Standard JIS T8141
- MonotaRO Spatter Protection Plate Polycarbonate Inside ColoredMade of impact-resistant and light polycarbonate, more and more people are switching from plain glass to prevent spatter. * Do not use for anything other than its intended purpose.Dimension (mm) About 108 x about 51 x about 2 Dimensions, Width x Length x Thickness (mm) About 108 x about 51 x about 2 Specification Polycarbonate Material (Lens) Polycarbonate
- MonotaRO Disaster prevention Cover typeCover-type disaster prevention aspect. Two types of colored glass are used according to the work. It is a type that is directly worn. The large lens and the small lens can be flipped overhead together, but it is also possible to flip only the small lens. * Do not use for anything other than its i... Read MoreShade No. # 2 (large), # 11 (small) UV Transmittance (%) 310nm：0.000 360nm：0.253 370nm：0.059 Mass (g) About 340 Material (Frame) Aluminum Type Headband type Material (Lens) Polycarbonate lens Specification UV protection
- Seiko Seisakusho Headgear for helmets A and BSuitable for Helmet A type, B type
- NIHON KOKI SEISAKUSHO (NIKKO) Welding plateAbrasion-resistant glassMaterial Shading glass Color Green
- TRUSCO Welding Face Shield with HandleIt is made of vulcanized fiber, which is light, hard, and has excellent electrical insulation. For arc welding work. * For each light-shielding glass sold separately, two glass pieces sold separately are required to be sandwiched from both sides.Facepiece Dimensions, Width x Length (mm) 221×315 Trusco Part No. 228-2771 Applicable plate 105 x 50mm (sold separately) Mass (g) 300 Type Welding surface (hand-held)from ₱1,356.44Min. 2 days
- MonotaRO Inner protection plate For automatic welding light shielding surface (M3000F (M / 4))For replacing the inner protective plate for the automatic welding light-shielding surface (M3000F (M / 4)). * Peel off the protective stickers on both sides before use.Size (mm) 105×54×1 Material Polycarbonate Color Transparent
- TRUSCO Single Lens Safety Glass (for Gas Welding) GS-37WA light-shielding lens with excellent impact resistance. Can be used with orthodontic glasses (excluding some large glasses). Single-lens type with a wide field of view. It fits the face and is comfortable to wear. JIS standard equivalent product. UV cut. Gas welding, gas cutting work * Shading d... Read MoreMass (g) 45 Function Can be used with glasses Material (Frame) Polycarbonate Material (Lens) Polycarbonate Type Shading glasses
- TRUSCO 100 sheets of welding glassA low-priced type that emphasizes cost. A cover lens for light-shielding glass.Dimensions, Width x Length x Thickness (mm) 105×50×2 Thickness (mm) 2.0 Trusco Part No. 228-2798 Mass (g/pack) 2820 Mass (kg) 3 Dimensions, Height x Width (mm) 50×105 Remark Boxed Material / Finish Glass Suitable Model HS、TPW-T、TPW-K
- TOYO SAFETY Helmet Mounting Lens No.1400Cuts harmful UV rays by 99.999%! The type of hat does not matter. Just plug it into the eaves of your helmet or hat. Earl shape with a wide field of view. The lens is made of distortion-free polycarbonate resin. It is hard to be scratched by the special hard coating process. Protects your eyes fr... Read MoreUV Transmittance (%) 0.0003 or less Standard Mass (g) 85 Feature Can be used with glasses RoHS directive (corresponding to 10 substances) Correspondence Material (Lens) Polycarbonate lens Function UV cut
- STAR ELECTRIC MANUFACTURING (SUZUKID) Automatic shading surface JIDOUMEN FFSince it is hands-free, temporary welding and work will be smooth. The shading degree is as wide as 7 to 13. The power supply is positive and solar with the adoption of AAA batteries that can be easily entered. With a test button, you can check the operation and it is safe and secure. It can also... Read MoreField of View (mm) 96×40 Shade No. 7 ~ 13, (before shading degree) 3.5 Power Supply Solar + AAA battery x 1 Type Automatic shading surface Range of Use TIG / MIG / MAG / MMA (hand rod welding) Sensitivity Adjustment Dial type stepless adjustment Responding Speed (seconds) 1/25000
-
- YAMAMOTO (Yamamoto Kogaku) Welding Safety Glasses No.337WStandard type of light-shielding protective glasses. A glass type that can be worn with glasses that can be worn over prescription glasses. Since it can be worn over the corrective glasses, it not only protects the eyes from flying objects, but also prevents scratches on the corrective glasses. U... Read MoreMass (g) 43 Type Shading glasses Material (Frame) plastic
- TRUSCO Resin welded cover surfaceIt is made of plastic that is light and durable, and is not easily deformed by water or heat. Uses a resin surface spring that makes it easy to replace the plate. ANSI Z87.1 compliant product. Arc welding work. * Shading plate and protective plate are sold separately. ● Make sure that the plates... Read MoreTrusco Part No. 300-0915 Mass (g) 350 Dimensions, Height x Width (mm) 400×300 Material Polypropylene (PP) Type Welding surface (cover type)
- Riken Chemical Spatter prevention plateWhite glass for welded surface (PC plate) Made of PC polycarbonate with excellent impact resistance, this product can be replaced with plain glass that is resistant to spatter.Dimension (mm) 50×107 Specification Non-JIS standard Material PC (Polycarbonate) Type Polycarbonate Color Transparent
- NIHON KOKI SEISAKUSHO (NIKKO) Welding surfaceFlame-retardant, thick, durable and soft material. It is soft and fits the body, so it is especially suitable for work in narrow spaces.Type Opening window Mass (g) 293
- ESCO Welding GlassesIt is a loose design that can be worn over glasses. Lightweight and fits everyone ・ It blocks harmful ultraviolet rays and infrared rays. UV cut lens (cuts 99.999% of UV rays harmful to the eyes) Glasses for brazingMass (g) 45 Material Polycarbonate resin Type Welding glasses
- YAMAMOTO (Yamamoto Kogaku) Shading glasses YW-70Scratch prevention, impact resistance, UV / infrared cut plastic lens used. Can be used with glasses. Eye protection during gas welding / cutting peripheral work, work in front of a high-heat furnace, etc.Dimensions, Width W x Height H x Depth D (mm) 148×55×145 Mass (g) 39 Feature Can be used with glasses Standard JIS T8141 Type JIS standard product Material (Lens) Polycarbonate lens Material (Frame) plastic
-
- TRUSCO Twin Lens Safety Glasses (for Gas Welding) GS-70WIt has high light-shielding performance with upper and lower eaves and sides. Uses a shock-resistant polycarbonate lens. It is a JIS T8141 standard product. Gas welding work * Shading degree # 1.4 is for peripheral workers (welding workers use # 3) * Do not use as light-shielding glasses for lase... Read MoreMass (g) 37 Specification Can be used with glasses Standard JIS standard product Material (Lens) Polycarbonate (PC) / Hard coat Type Shading glasses Function Vine adjustable Material (Frame) plastic
- TRUSCO Helmet mounting double typeWith spherical injection molding, there is no reaction from behind and the visibility is refreshing. A lens with a canopy protects the eyes from light rays and dust from above. UV cut. The lens is scratch-proof. Can be used with protective goggles. * Mounting brackets are sold separately. For wor... Read MoreTrusco Part No. 231-6021 Mass (g) 290 UV Transmittance (%) 313nm：0.001 365nm：0.001 Material (Frame) Aluminum Mounting Bracket BM-TK Color Green (double type) Shade No. On lens: # 8 Below lens: # 2 Material (Lens) Polycarbonate lens Type helmet
- Riken Chemical Helmet mounting weld surface 610XMade of plastic that is resistant to shock and humidity (water). For wearing a helmet. The window opens and closes up and down. Can be widely used from MP type helmets to grooved type helmets. * Shading plate and protective plate are sold separately. * Some helmets cannot be used.Suitable for (Helmet): MP type, baseball cap type Heat Resistance Temperature (℃) 100 Applicable plate 105×50mm Dimensions (H x W x D) (mm) 250×240×230 Mass (g) 315 Type Helmet type Material Polypropylene
