A product that is much lighter than conventional spatter sheets and can be easily carried to the site. In addition, there is no need to process eyelets on the product, it can be easily cut to any size on site with scissors, and it can be said that there is no fraying from the cut part.
* When wel... Read More
Thickness (mm) 2 Mass (g/m2) 400 Color Black Specification Felt processing
Spatter felt fabrics are lighter and cheaper than traditional textiles. Since there is no texture, it is difficult for slag to enter and it is easy to remove the attached slag. The cut surface does not fray.
For slag receiving work. (Sprinkling water is even more effective)
* Cannot be used to pr... Read More
Specification Class A passing product Material / Finish 100% flame resistant fiber
It is a product that has the characteristics of SG-250 and has a higher drop-out strength than SG-250. Welding of refractory sheets for construction ・ Flame-retardant test for welding sparks JIS A 1323 Class A passed product. The silicone-based resin-coated surface has good spark repelling (perf... Read More
Mass (g/m2) 590 Thickness (mm) 2 Color Black x single sided silicon Type Single-sided silicon coating
Sputter sheet Gold Alpha (passed JIS A1323A class) is used for the outer material and ceramic blanket is used for the inner material, which can also be used as a heat insulating material in high temperature range. Since the silica fiber (high heat resistant glass fiber), which is the material of ... Read More
Continuous use 1000℃ Thickness (mm) 15 Instant Heat Resistance 1650℃
Carbon felt PC400 is a felt-like sheet made of 100% carbon fiber. Lightweight and excellent in workability. Since it is felt-shaped, it can be cut freely and does not fray. It is hard to tear because it has stronger tensile strength than conventional felt.
Welding spark receiver simple protective... Read More
Thickness (mm) 2 Color Black Material Carbonized fiber Specification Folding around: None JIS Standard JIS A 1323 Class A Eyelet None
Single-sided special flame-retardant resin coating on conventional spatter sheet carbon felt. Durability has been further improved. The special flame-retardant resin coated surface repels sparks well, and the non-coated surface on the back surface absorbs water to improve safety. No sewing on she... Read More
Thickness (mm) 1.65 Specification Class A passing product Eyelet Inner Diameter (mm) Φ12
Carbon cloth # 3000N is a domestically produced sheet made of 100% carbon fiber plain weave and impregnated with a flameproofing agent. Since the carbon fiber is impregnated with a flameproofing agent, it has excellent fire resistance and heat resistance. Because it is thick, it can be used as a ... Read More
Thickness (mm) 2.3 Color Black JIS Standard JIS A 1323 Class A
The roll version of the welded spark receiving sheet is ideal for curing sparks that are spread on site. Although it is a thick cloth, it can be easily cut with scissors.
Thick material is now available in the "EX type", which is a conventional spatter sheet carbon felt coated with a special flame-retardant resin on one side! The special flame-retardant resin-coated surface repels sparks well, and the non-coated surface on the back side absorbs water and... Read More
Thickness (mm) 4.5 Continuous heat-resistant temperature (℃) 250
By pressing, the surface is smooth and the thickness is uniform, and the spark receiving performance is improved. Light, supple and easy to work with. Since there is no silicone coating, it is even more effective to use it with water. It can be cut with scissors, and the cut surface will not fray... Read More
Width (m) 1 Material 100% flame resistant fiber Width (mm) 1000 Length (m) 20 Length (mm) 20000 Trusco Part No. 774-8655 Thickness (mm) About 2 RoHS directive (corresponding to 10 substances) Correspondence Type roll
Single-sided special flame-retardant resin coating on conventional spatter sheet carbon felt. Durability has been further improved. The special flame-retardant resin coated surface repels sparks well, and the non-coated surface on the back surface absorbs water to improve safety. No sewing on she... Read More
It is much lighter than conventional spatter sheets, is easy to carry on site, and has excellent workability. Flame-retardant rubber, which is cheaper and has the same performance as silicon-based resin, is used on one side. Flame retardancy is improved by using aluminum hydroxide, which is also ... Read More
JIS Standard A 1323 Flame retardant class A passed Thickness (mm) About 3 Specification Class A passing product
It is coated with a special flame-retardant resin on one side, which repels sparks well, and the non-coated side on the back side absorbs water to improve safety. There are no stitches on the sheets No. 4 and No. 6. Durability has been further improved.
* Cannot be used to prevent sparks from sca... Read More
Mass (kg) 0.54 Length (m) 1 Thickness (mm) 1.65 Width (mm) 2000 Trusco Part No. 455-1273 JIS Standard JIS A1323 Class C Passed No. 02A1615 Type cut
An affordable, low-priced type. It is a shatterproof product. It does not contain harmful fibers such as asbestos or glass fibers that are irritating to the skin.
Carbon felt fabrics are lighter than traditional woven fabrics, and cheap carbon felt fabrics have no texture, so sparks do not escape from the texture. 2.8 mm thick type and 5.0 mm thick with slow heat conduction are available. The cut surface does not fray.
Trusco Part No. 217-2682 Thickness (mm) 2.8 Continuous Use Temperature (℃) 250℃ Instant Heat Resistance 1300℃ Mass (kg) 7.20 Type roll Material 100% flame resistant fiber Dimensions, Width W x Length L (cm x m) 100×20
An affordable, low-priced type. It is a shatterproof product. It does not contain harmful fibers such as asbestos or glass fibers that are irritating to the skin.
Length (m) 10 Thickness (mm) 0.8mm Width (mm) 1000 Type roll 2018 Trusco page 7 0381
By pressing, the surface is smooth and the thickness is uniform, and the spark receiving performance is improved. Light, supple and easy to work with. Since there is no silicone coating, it is even more effective to use it with water. It can be cut with scissors, and the cut surface will not fray... Read More
Material 100% flame resistant fiber Width (mm) 1000 Type cut Thickness (mm) About 2
Carbon felt fabrics are lighter than traditional woven fabrics, and cheap carbon felt fabrics have no texture, so sparks do not escape from the texture. 2.8 mm thick type and 5.0 mm thick with slow heat conduction are available. The cut surface does not fray.
Material 100% flame resistant fiber Instant Heat Resistance 1300℃ Dimensions, Width W x Length L (cm x m) 100×1 Mass (kg) 0.36 Thickness (mm) 2.8 Type cut Trusco Part No. 217-2658 Continuous Use Temperature (℃) 250℃
Carbon felt fabrics are lighter than traditional woven fabrics, and cheap carbon felt fabrics have no texture, so sparks do not escape from the texture. 2.8 mm thick type and 5.0 mm thick with slow heat conduction are available. The cut surface does not fray.
Thickness (mm) 2.8 Instant Heat Resistance 1300℃ Type cut Material 100% flame resistant fiber Continuous Use Temperature (℃) 250℃ Dimensions, Width W x Length L (cm x m) 100×5 Trusco Part No. 217-2674 Mass (kg) 1.80
It is coated with a special flame-retardant resin on one side, which repels sparks well, and the non-coated side on the back side absorbs water to improve safety. There are no stitches on the sheets No. 4 and No. 6. Durability has been further improved.
* Cannot be used to prevent sparks from sca... Read More
Mass (kg) 0.84 Length (m) 1 Thickness (mm) 2.5 Width (mm) 2000 Trusco Part No. 455-1281 JIS Standard JIS A1323 Class A Passed No. 02A1158 Type cut
Carbon felt fabrics are lighter than traditional woven fabrics, and cheap carbon felt fabrics have no texture, so sparks do not escape from the texture. 2.8 mm thick type and 5.0 mm thick with slow heat conduction are available. The cut surface does not fray.
Trusco Part No. 217-2739 Instant Heat Resistance 1300℃ Material 100% flame resistant fiber Mass (kg) 0.68 Continuous Use Temperature (℃) 250℃ Type cut Dimensions, Width W x Length L (cm x m) 100×1 Thickness (mm) 5.0
Carbon felt fabrics are lighter than traditional woven fabrics, and cheap carbon felt fabrics have no texture, so sparks do not escape from the texture. 2.8 mm thick type and 5.0 mm thick with slow heat conduction are available. The cut surface does not fray.
Thickness (mm) 5.0 Dimensions, Width W x Length L (cm x m) 100×5 Type cut Mass (kg) 3.40 Trusco Part No. 217-2755 Material 100% flame resistant fiber Instant Heat Resistance 1300℃ Continuous Use Temperature (℃) 250℃
Carbon felt fabrics are lighter than traditional woven fabrics, and cheap carbon felt fabrics have no texture, so sparks do not escape from the texture. 2.8 mm thick type and 5.0 mm thick with slow heat conduction are available. The cut surface does not fray.
Trusco Part No. 217-2763 Instant Heat Resistance 1300℃ Material 100% flame resistant fiber Thickness (mm) 5.0 Type roll Dimensions, Width W x Length L (cm x m) 100×10 Mass (kg) 6.80 Continuous Use Temperature (℃) 250℃
Carbon felt fabrics are lighter than traditional woven fabrics, and cheap carbon felt fabrics have no texture, so sparks do not escape from the texture. 2.8 mm thick type and 5.0 mm thick with slow heat conduction are available. The cut surface does not fray.
Thickness (mm) 2.8 Trusco Part No. 217-2666 Type cut Material 100% flame resistant fiber Mass (kg) 0.72 Dimensions, Width W x Length L (cm x m) 100×2 Instant Heat Resistance 1300℃ Continuous Use Temperature (℃) 250℃
Carbon felt fabrics are lighter than traditional woven fabrics, and cheap carbon felt fabrics have no texture, so sparks do not escape from the texture. 2.8 mm thick type and 5.0 mm thick with slow heat conduction are available. The cut surface does not fray.
Type cut Mass (kg) 1.36 Dimensions, Width W x Length L (cm x m) 100×2 Material 100% flame resistant fiber Thickness (mm) 5.0 Instant Heat Resistance 1300℃ Trusco Part No. 217-2747 Continuous Use Temperature (℃) 250℃