A lime titanian welding rod with good welding workability, X-ray performance and mechanical properties. It has excellent workability in all postures and contains a large amount of iron powder in the coating material, so the welding speed is fast, the re-arcability is good, and the work efficiency... Read More
Adsorption 120J / energy (example) Elongation (%) 32 (example) Yield Point (N/mm2) 410 (example) Tensile Strength (N/mm2) 460 (example) Color Bar end color: White Remark Classification: NK, AB, LR, NV, BV RoHS directive (corresponding to 10 substances) Correspondence JIS Standard Z3211、D4303
Iron powder is added to the lime titanian coating material to re-arc and improve work efficiency. Especially in the case of fillet welding, the slag has good peelability, a beautiful bead appearance and excellent welding use novi can be obtained, which is unrivaled. In addition, by using a high c... Read More
Elongation (%) 32 Yield Point (N/mm2) 425 Tensile Strength (N/mm2) 466 RoHS directive (corresponding to 10 substances) Correspondence Shock Resistance (Destruction) Impact value: 114J Insulation Lime titania type Coating Lime titania type Color Rod end / Orange JIS Standard Z3211 E4303
A lime titania welding rod that reduces the amount of fume generated during welding by approximately 30% compared to other welding rods of the same type. An excellent welding rod with good re-arcing properties, bead elongation, and excellent slag peeling. The flexibility of the coating is good, s... Read More
AWS Standard A5.1 E6013 applicable Coating Lime titania type JIS Standard Z3211 E4303 (formerly Z3211 D4303)
Stable arc welding is possible even at low voltage such as 100V / 200V small welding machines. Shielded metal arc welding rod for low voltage mild steel. A high titanium oxide welding rod suitable for welding thin plates and light structures where appearance is important.
A welding rod with good bead appearance and slag peelability, as well as excellent X-ray performance and mechanical properties.
Welding of shipbuilding, bridges, construction, pressure vessels, etc. using mild steel and 490N / mm class 2 high-strength steel
AWS Standard A5.1 E7016 applicable RoHS directive (corresponding to 10 substances) Correspondence JIS Standard Z3211 E4916 U (former Z3212 D5016)
A welding rod designed with both workability and weldability in mind, and can be applied to all-position butt welding and fillet welding from thin plates to thick plates of about 20 mm or less. The horizontal fillet welding gives good slag and good spread of the beat, and the appearance of the be... Read More
Adsorption 110J / energy (example) Elongation (%) 32 (example) Yield Point (N/mm2) 410 (example) Tensile Strength (N/mm2) 460 (example) AWS Standard AWS A5.1 E6019 applicable Standard Patent No.1533782 Color Stick end color: light brown
The arc is soft and there is less spatter. The re-arc is very good. The amount of fume generated during welding is small, improving the working environment at the welding site. It has a wide welding current width and good rod bendability, so it has excellent workability in all postures. The slag ... Read More
RoHS directive (corresponding to 10 substances) Correspondence Type For mild steel Coating Lime titania type Specification Shinko ZERODE-44 or equivalent JIS Standard Z3211E4303
Designed with an emphasis on welding workability, it can be applied to all-position butt welding and fillet welding from thin plates to thick plates of about 20 mm or less. Especially in downward welding, the slag fog is stable, slag is less likely to get caught, and a stable, glossy and beautifu... Read More
Elongation (%) 30 (example) Yield Point (N/mm2) 400 (example) Tensile Strength (N/mm2) 450 (example) Adsorption 95J / energy (example) AWS Standard AWS A5.1 E6019 applicable Color Bar end color: green Standard Patent No.1533782
Designed with an emphasis on weldability, it has excellent crack resistance, pit resistance and X-ray performance among illuminant-based welding rods.
* The package design will change sequentially depending on the manufacturer's distribution inventory. *Exterior and interior dimensions, perfo... Read More
Color Bar end color: yellow RoHS directive (corresponding to 10 substances) Correspondence Coating Illuminite series JIS Standard Z3211 E4319 (former Z3211 D4301)
A low hydrogen omnidirectional welding rod for mild steel designed with efficiency in mind in addition to weldability and workability. The weld metal has excellent X-ray performance, mechanical properties, and workability in all postures, and because the coating material contains iron powder, the... Read More
Color Bar end color: Blue white Remark Classification: NK, AB, LR, DNV, BV, CR JIS Standard Z3211 E4316 U (former Z3211 D4316)
Low fume, low moisture absorption type For general structures. Compared to the same type of welding rod, the amount of fume during welding is reduced by about 20%. It has excellent re-arcability, and smooth temporary welding can be performed even with a small welding machine or engine welder with... Read More
Convenient welding rod Insulation in a portable case, anyone can easily weld, and a beautiful bead can be obtained with little spatter adhesion even at low currents. In particular, the slag in fillet welding has good peelability and improves work efficiency.
Thin plates and general hardware, cons... Read More
RoHS directive (corresponding to 10 substances) Correspondence
A highly titanium oxide welding rod that has good workability especially in downward and horizontal fillet welding.
Welding and decorative filling of thin plates and light structures such as general machines, vehicles, and lightweight steel frames that use mild steel
Coating High titanium oxide JIS Standard Z3211 E4313 (old Z3211 D4313)
With advanced welding technology, stable arc and slag fluidity and re-arcability are good, and high-efficiency welding can be expected. Has a high level of welding technology workability. Stable arc, slag fluidity, and maximum arc performance are good, and high-efficiency welding is possible. Wel... Read More
Elongation (%) 30 or more Type Lime titania and JIS / D4303 equivalent
Shielded metal arc welding rod for basic mild steel.
* Be sure to read the instruction manual of the welding machine to be used before use. * Do not look directly at the arc light during welding. Use a light-shielding surface as it may damage your eyes. * Welded parts are hot. Be careful not to g... Read More
Elongation (%) 17 or more Type Lime titania and JIS / D4303 equivalent
A lime titanian welding rod containing approximately 30% iron powder in the coating agent. It has excellent re-arcing properties and good bead elongation, making it ideal for intermittent welding, fillet welding, tack welding (temporary attachment), etc.
Thin / middle plate Welding of general str... Read More
Color (Stick end) red JIS Standard JIS Z3211D4303 standard product
A high titanium oxide welding rod that can be welded vertically and downward with a rod diameter of 1.6 to 5.0 mm. Since the arc is stable and a glossy bead with less spatter can be obtained, it is ideal for welding thin plates and light structures, mainly vertical downward welding. For vertical ... Read More
Elongation (%) 23 (example) Yield Point (N/mm2) 450 (example) Tensile Strength (N/mm2) 510 (example) Color Bar end color: Black RoHS directive (corresponding to 10 substances) Correspondence
A high titanium oxide welding rod with good workability in downward and horizontal fillet welding, with stable arc, less spatter, and good slag peelability.
Welding rods for low-voltage welding machines for thin plates and light structures (100V compatible). Welding of general machinery, vehicles... Read More
Specification Shinko B-33 or equivalent Color (Stick end) white JIS Standard JIS Z3211D4313 standard product
It is used for the first layer of the joint, and the back side can be omitted, which contributes to efficiency improvement. The arc is designed to be stable on the lower current side than general welding. A beautiful back bead is obtained and it is also used in skill competitions. It is often use... Read More
AWS Standard A5.1 E7016 applicable JIS Standard Z3211 E4316 (former Z3211 D4316)
The most basic low hydrogen rod. It has excellent X-ray performance and mechanical properties, good arc stability, slag peeling, and bead appearance, and can be easily welded to all postures. It is also used for skill tests.
NZ-11 is a special shielded metal arc welding rod developed for welding hot-dip galvanized steel materials, and is designed to have excellent pore resistance to pits, blow holes, etc. even if it is welded as it is without peeling the plating film. Therefore, the number of repair steps due to the ... Read More
RoHS directive (corresponding to 10 substances) Correspondence Color Rod end / green Insulation Special system JIS Standard Z3211 E4340
LC-3 is made by adding iron powder to a lime titanian coating to improve the efficiency of re-arc and work. Especially in the case of fillet welding, the slag has good peelability, a beautiful bead appearance and excellent welding growth can be obtained, which is unrivaled by other companies. In ... Read More
RoHS directive (corresponding to 10 substances) Correspondence Insulation Lime titania type Color Rod end / Orange JIS Standard Z3211 E4303
This is the world's first low-hydrogen welding rod exclusively for vertical downward movement, which was developed for the purpose of improving the efficiency of vertical welding. The slag naturally peels off, the weld metal has excellent crack resistance, and the mechanical properties are al... Read More
Adsorption 180J / energy (example) Elongation (%) 32 (example) Yield Point (N/mm2) 480 (example) Tensile Strength (N/mm2) 560 (one example) AWS Standard AWS A5.1 E7048 applicable JIS Standard Z3211 EU4948
550 to 610N / mm A moisture-resistant, ultra-low hydrogen omnidirectional welding rod designed for class 2 high-strength steel. The weld metal has excellent X-ray performance and mechanical properties, and the amount of hydrogen is kept low, so crack resistance is also good. In terms of workabili... Read More
Adsorption 150J / energy [(-20 ℃) example] Elongation (%) 30 (example) Yield Strength (N/mm2) 550 (0.2%, one example) Tensile Strength (N/mm2) 650 (one example) Remark Classification: NK, AB, LR, NV, BV, CR JIS Standard Z3211 E6216-N1M1 U
490N / mm Low hydrogen type all-position welding rod for class 2 high-strength steel. It has excellent crack resistance of weld metal, and has good mechanical properties and X-ray performance. In particular, it is extremely easy to stand upright and upward, and is a representative brand of tradit... Read More
JIS Standard Z3211 E4916U (old Z3212 D5016) AWS Standard A5.1 E7016 applicable Coating Low hydrogen type
It is a high titanium oxide welding rod that is the easiest to use for all-position welding of thin plates. The arc is gentle, there is little spatter, and there is no worry of melting. The slag naturally peels off, resulting in a beautiful shiny bead. Ideal for welding thin plates and lightweigh... Read More
It contains a large amount of iron powder and has excellent efficiency. Workability is good in all postures, and it has excellent slag peeling and re-arcing properties.
* The current range is for reference only and does not compensate for the technology.
AWS Standard A5.1 E6019 applicable JIS Standard Z3211 E4319 (former Z3211 D4301)
520N / mm Low hydrogen omnidirectional welding rod for class 2 high-strength steel. Workability in all postures, especially arc stability, slag peeling, and bead appearance are good. In addition to welding 520N / mm class 2 high-strength steel, it is also suitable for underlay welding of hardened... Read More
Adsorption 200J / energy (example) Elongation (%) 29 (example) Yield Point (N/mm2) 510 (example) Tensile Strength (N/mm2) 600 (one example) AWS Standard A5.5, applicable to E7016-G RoHS directive (corresponding to 10 substances) Correspondence JIS Standard Z3211、D5316
It is a lime titanian welding rod that has excellent re-arc resistance and bar burn resistance, and is ideal for use in harsh environments because it does not easily chip flux. In addition, the bead growth is good and contributes to the improvement of work efficiency. It also has excellent bar be... Read More
Color (Stick end) yellow, (stick side) brown JIS Standard Z 3211 E4303-U
It can be used with a welding machine with a 100V power supply. Low voltage mild steel coated arc welding rod. Used for welding mild steel materials. Suitable for welding thin plates and light structures where appearance is important. If you use a small low voltage welder, use this type of weldin... Read More
Welding Thickness (mm) 1.2~3.0 Rod Diameter (Φmm) 1.4 JIS Standard JIS / D4313 equivalent Material High titanium oxide Rod Length (mm) 230 Welding Current (A) 30~60
A low hydrogen welding rod with excellent crack resistance, mechanical properties and X-ray performance of weld metal. The stable arc and wide working current range make it ideal for all-position welding, and it is a representative brand of low-hydrogen welding rods. The amount of spatter and the... Read More
AWS Standard A5.1 E7016 applicable Coating Low hydrogen type JIS Standard Z3211 E4316U (old Z3211 D4316)
LC-08 is a lime titanian welding rod developed in 2008. Focusing on re-arcability, the slag has good peelability and a beautiful bead appearance can be obtained. Due to its outstanding re-arcability, work efficiency can be improved in intermittent welding, temporary welding, and fillet welding. F... Read More
Insulation Lime titania type Color Rod end / Green JIS Standard Z3211 E4303
It is a vertical downward bar. High current can be used, and efficiency is improved by natural slag peeling. It has excellent mechanical properties, crack resistance, and bead appearance.
* The current range is for reference only and does not compensate for the technology.
AWS Standard A5.1 E7048 applicable RoHS directive (corresponding to 10 substances) Correspondence JIS Standard Z3211 E4948 (former Z3212 D5016)
A special arc welding rod developed for welding hot-dip galvanized steel materials. Even if the plating film is welded as it is without peeling off, it is designed to have excellent pore resistance to pits and blow holes, so the man-hours for repairing due to welding defects can be reduced.
Even a welding machine equipped with an electric shock prevention device shows good re-arcability by just touching the base metal lightly. Good welding is possible in all postures including vertical and downward movement. It is a welding rod that is resistant to cracking because it is a coating m... Read More
Absorption Energy (J) 180 Elongation (%) 30 Withstand Pressure (MPa) 430 Tensile Strength (MPa) 520 AWS Standard A5.1 E7048 RoHS directive (corresponding to 10 substances) Correspondence JIS Standard Z3211 E4948