Welding Rods for Stainless Steel
Stainless steel is a rod-shaped welding product. A weld metal with excellent heat resistance, corrosion resistance, oxidation resistance, and mechanical properties can be obtained in the welded state. Please note that it is necessary to dry at 150 ℃ ~ 200 ℃ for about 1 hour before using it. Many of them have low risk of intergranular corrosion and are mainly used for welding plates and cast products of important scientific equipment. If the type has a lime titania-type coating, it can be welded in all positions.
Other Related Pages
- Kobelco (Kobe Steel) Welding rod for stainless steelWelded metal with excellent heat resistance, corrosion resistance and mechanical properties can be obtained as it is welded. Since the austenite structure contains an appropriate amount of ferrite, it has low cracking sensitivity and excellent weldability. For welding between SUS304 (18% Cr-8% Ni... Read MoreAWS Standard A5.4 E308-16 applicable Color Bar end color: yellow Remark Classification: NK, ABS, DNV, GL RoHS directive (corresponding to 10 substances) Correspondence Suitable for SUS304 Type SUS304 stainless steel JIS Standard Z3221 ES308-16 (former Z3221 D308-16)
- STAR ELECTRIC MANUFACTURING (SUZUKID) Coated arc welding rod for stainless steel S-1Shielded metal arc welding rod for low voltage stainless steel.Rod Length (mm) 230 JIS Standard D308-16 Suitable for SUS304/306/308
- MonotaRO Welding rod For stainless steel Small amountWelded metal with excellent heat resistance, corrosion resistance and mechanical properties can be obtained as it is welded. Since the austenite structure contains an appropriate amount of ferrite, it has low cracking sensitivity and excellent weldability. For welding between SUS304 (18% Cr-8% Ni... Read MoreType SUS304 stainless steel JIS Standard Z3221 D308-16 Suitable for SUS304 Rod Diameter (Φmm) 2.6 Mass (g) About 200 AWS Standard A5.4 E308-16 applicable Rod Length (mm) 300
- Kobelco (Kobe Steel) Welding rod for stainless steelSince the austenite structure contains a relatively large amount of ferrite, it has low cracking sensitivity, and a welded metal with excellent heat resistance and corrosion resistance can be obtained as it is welded. In addition, it has a large amount of alloy and shows a stable structure mainly... Read MoreElongation (%) 39 (example) Yield Strength (N/mm2) 410 (0.2%, one example) Yield Point (N/mm2) 410 (example) Tensile Strength (N/mm2) 590 (example) Adsorption 62J / Energy (example) Suitable for SUS309 for different base materials JIS Standard Z3221 ES309-16
- TRUSCO Stainless Welding RodAn austenitic stainless steel welding rod with a structure of 19% Cr-9% Ni. Good slag peelability and arc stability, less spatter, and excellent bead appearance. It also has good bar burnability, which is a drawback of stainless steel welding rods. JIS Z3211D308-16 standard product (excluding TSS... Read More
- NIKKO YOZAI MFG Non-sputter coated arc welding rod for stainless steelA stainless steel shielded metal arc welding rod that does not spatter. It reduces unnecessary costs such as spatter removal work, improves welding workability in all postures, and has excellent slag peelability. Efficiently obtains a beautiful bead appearance. Common gold welding of SUS304 (18Cr... Read MoreColor (Stick end): yellow AWS Standard AWS A5.4 E308-16 Suitable for SUS304
- KISWEL Welding rod (for general use)For welding vehicles, bridges, lightweight steel frames, and other general structures. Equivalent to Shinko Z-44. For welding vehicles, bridges, lightweight steel frames, and other general structures.Type Covered arc welding rod Coating Lime titania type Specification Shinko ZERODE-44 or equivalent JIS Standard Z3211 E4303 (formerly Z3211 D4303)
- H&H Welding rod for stainless steelThis product is a repacked product of Nikko Welding Materials Co., Ltd. welding rods for small-lot sales. 19Cr-9Ni Austenite welding rod with excellent workability obtained by welding metal. Most widely used in stainless steel.Suitable for SUS304 JIS Standard Z3221 ES308-16 (former Z3221 D308-16)
- MonotaRO Welding rod for stainless steelIt has arc stability, a clean appearance, and excellent resistance to corrosion. Suitable for corrosion-resistant stainless steel with a welding temperature of 300 ° C or less. * During welding, inhaling the generated fume and gas may damage your health, so please exhaust and ventilate and wear p... Read MoreRod Length (mm) 300 Current (A) 50~80 JIS Standard Z3221 D308-16 equivalent Suitable for SUS304 AWS Standard A5.4 E308-16 equivalent Rod Diameter (Φmm) 2.5
- Kobelco (Kobe Steel) Welding rod for mild steel to 550 MPa class steelA lime titanian welding rod for all postures suitable for welding thin and medium plates. Since iron powder is contained in the coating agent, it has excellent re-arcability and beat elongation, so it is suitable for tack welding, intermittent welding, fillet welding, etc. Vertical downward weldi... Read MoreAdsorption 110J / energy (example) Elongation (%) 31 (example) Yield Point (N/mm2) 410 (example) Tensile Strength (N/mm2) 460 (example)
- TASETO Stainless steel welding rod RNY-308Taseto RNY308 is the most commonly used welding rod for 18Cr-18Ni stainless steel (SUS304). Since it has a lime titania type coating, it can be welded in all postures. Welding workability is good, and the properties of the weld metal are equal to or better than the base metal. * Please dry at 150... Read MoreColor Bar end color: yellow AWS Standard E308-16 applicable Remark Certification: NK, ABS, NV JIS Standard ES308-16
- NIPPON WELDING ROD Welding rod for stainless steelAustenitic stainless steel shielded metal arc welding rod used for welding chemical equipment, chemical containers, various plants, stainless steel building structures, etc. It has good welding workability, corrosion resistance and mechanical properties of weld metal, and has excellent welding cr... Read MoreRoHS directive (corresponding to 10 substances) Correspondence Identification color Edge / Yellow Suitable for SUS304
- NIKKO YOZAI MFG Non-sputter coated arc welding rod for stainless steelIdeal for welding dissimilar materials of iron and stainless steel. A stainless steel shielded metal arc welding rod that does not spatter. It reduces unnecessary costs such as spatter removal work, improves welding workability in all postures, and has excellent slag peelability. Efficiently obta... Read MoreSuitable for 20262 RoHS directive (corresponding to 10 substances) Correspondence JIS Standard JIS Z3221 ES309-16
- TRUSCO Stainless steel welding rodAn austenitic stainless steel welding rod with a 25% Cr-12% Ni structure. Good slag peelability and arc stability, less spatter, and excellent bead appearance. It also has good bar burnability, which is a drawback of stainless steel welding rods. Welding of stainless steel (22% Cr-12% Ni) Welding... Read MoreJIS Standard JIS Z 3211D309-16 Suitable for SUS309 for different base materials Mass (g) 500
- NIPPON WELDING ROD Welding rod for stainless steelAn austenitic stainless steel welding rod with a composition of 24Cr-13Ni. Since the alloying degree of chromium and nickel is high, it is suitable for welding dissimilar metals of carbon steel or low alloy steel and stainless steel, and has excellent crack resistance. SUS309S, for dissimilar fit... Read MoreIdentification color Edge / Black Suitable for SUS309 for different base materialsfrom ₱6,163.40Min. 2 days
- TASETO Stainless steel welding rod RNY-309Taseto RNY309 is designed to increase the amount of ferrite in the weld metal to prevent high temperature cracking. It is mainly used for welding dissimilar materials between mild steel / low alloy steel and stainless steel, but it is also applied to welding curable alloy steel. Since it has a li... Read MoreAWS Standard E309-16 applicable JIS Standard ES309-16
- Kobelco (Kobe Steel) Welding rod for stainless steelIt contains an appropriate amount of ferrite, has low cracking sensitivity, and has good workability. NC-38L has a low C and is more resistant to intergranular corrosion than NC-38.from ₱3,288.93Min. 2 days
- STAR ELECTRIC MANUFACTURING (SUZUKID) Star Road electric welding rod (low voltage for stainless steel) S-1It can be used with a welding machine with a 100V power supply. Shielded metal arc welding rod for low voltage stainless steel. Used for welding stainless steel (SUS304, etc.). It has excellent heat resistance, corrosion resistance and mechanical properties as it is welded. If you use a small low... Read MoreRod Length (mm) 230
- STAR ELECTRIC MANUFACTURING (SUZUKID) Starload low voltage dissimilar metal rodSuitable for welding SUS309S and heat resistant cast steel and joining SUS309 stainless steel and mild steel. It can be used for welding the 6th layer of stainless clad steel or for corrosion-resistant overlay on mild steel.Type For dissimilar metal weldingfrom ₱821.92Min. 2 days
- TASETO Stainless steel welding rod RNY-316LTaseto RNY316L is the first low-carbon stainless steel welding rod made in Japan. Since there is little risk of intergranular corrosion, it is used for welding low carbon 18Cr-12Ni-Mo stainless steel (SUS316L) plates and castings of important chemical equipment, and it is possible to omit the sol... Read MoreJIS Standard ES316L-16 AWS Standard E316L-16 applicablefrom ₱4,929.90Min. 2 days
- Kobelco (Kobe Steel) Welding rod for stainless steelSince the austenite structure contains an appropriate amount of ferrite, crack sensitivity is low, workability is good, and a sound welded part can be obtained. Welded metal with excellent heat resistance and corrosion resistance can be obtained as it is welded, and it is particularly excellent i... Read MoreAWS Standard A5.4 E316-16 applicable RoHS directive (corresponding to 10 substances) Correspondence Suitable for SUS316 Type SUS316 stainless steel JIS Standard Z3221 ES316-16from ₱4,518.73Min. 2 days
- NIKKO YOZAI MFG Covered arc welding rod (for stainless steel) NS-308The 308 type is a welding rod that obtains 19Cr-9Ni austenitic weld metal. It has excellent durability and corrosion resistance, and is most widely used among austenitic stainless steels in the chemical industry, food industry, and construction. Coating type is lime titania type with good workabi... Read MoreInsulation Lime titania type Color Rod end / yellow JIS Standard Z3221 ES308-16from ₱8,219.24Min. 4 days
- NIKKO YOZAI MFG Covered arc welding rod (for stainless steel) NS-309The 309 type is a welding rod that obtains 25Cr-12Ni austenite weld metal. It has a high content of Cr and Ni, and has excellent heat resistance and corrosion resistance. It also has good crack resistance because it contains a few percent of ferrite. Therefore, it is suitable for common gold weld... Read MoreRod Diameter (Φmm) 3.2 Rod Length (mm) 350 AWS Standard A5.4 E309-16 applicable RoHS directive (corresponding to 10 substances) Correspondence Insulation Lime titania type Color Rod end / black JIS Standard Z3221 ES309-16from ₱12,330.91Min. 4 days
- TASETO Stainless steel welding rod RNY-310Taseto RNY310 is suitable for welding AISI310 or SUS310S, and its corrosion resistance and heat resistance are equal to or higher than the base metal. Since it has a special design, there is less risk of high temperature cracking and less embrittlement, so it is also suitable for welding dissimil... Read MoreJIS Standard ES310-16 AWS Standard E310-16 applicablefrom ₱6,574.57Min. 5 days
- TOKUDEN Covered arc rod for stainless steel NCF-10A 25Cr-20Ni austenitic stainless steel weld rod provides a stable, fully austenitic weld metal. Due to its high chromium and nickel content, it has excellent corrosion resistance, heat resistance, oxidation resistance, and mechanical properties, and can be used for welding Cr-Mo steel, high carbo... Read MoreAWS Standard A5.4 E310-16 RoHS directive (corresponding to 10 substances) Correspondence Coating Lime titania JIS Standard Z3221 ES310-16from ₱8,219.24Min. 12 days
- TASETO Stainless steel welding rod RNY-308LTaseto RNY308L is specially designed to have a very low carbon content in the weld metal. It is a welding rod that is indispensable for welding corrosion-resistant containers that cannot be subjected to solution heat treatment because it has less risk of intergranular corrosion. Since it has a li... Read MoreJIS Standard ES308L-16 AWS Standard E308L-16 applicablefrom ₱3,535.63Min. 5 days
- NIKKO YOZAI MFG Coated arc welding rod (for stainless steel) NSN-308The 308 type is a welding rod that obtains 19Cr-9Ni austenitic weld metal. It has excellent heat resistance and corrosion resistance, and is most widely used in various chemical industries, food industries, construction, etc. among austenitic stainless steels. The coating type is a lime titanian ... Read MoreAWS Standard A5.4 E308-16 applicable Insulation Lime titania type Color Rod end / yellow JIS Standard Z3221 ES308-16from ₱9,863.91Min. 4 days
- H&H MIX welding rod set (for stainless steel & low current)Set Contents BL01 / BL02 / S01 5 eachfrom ₱390.20Min. 3 days
- NIKKO YOZAI MFG Non-sputter coated arc welding rod for stainless steelA stainless steel shielded metal arc welding rod that does not spatter. It reduces unnecessary costs such as spatter removal work, improves welding workability in all postures, and has excellent slag peelability. Efficiently obtains a beautiful bead appearance. Low carbon type.Suitable for SUS304・304Lfrom ₱2,795.53Min. 123 days
- NIPPON WELDING ROD Welding rod for stainless steel18Cr-12Ni-2Mo Austenitic stainless steel TIG welding rod, Since it contains a large amount of nickel and molybdenum, it has excellent corrosion resistance to non-oxidizing acids such as sulfuric acid and dilute sulfuric acid. * As a general rule, do not perform residual heat and keep the temperat... Read MoreSuitable for SUS316from ₱6,574.57Min. 9 days
- NIPPON WELDING ROD Welding rod for stainless steelIt has a composition of 25Cr-20Ni and has a complete austenite structure. Since the alloying degree of chromium and nickel is high, it has excellent corrosion resistance, heat resistance and oxidation resistance. For SUH310, SUS310S, dissimilar fittings * As a general rule, do not perform residua... Read More0.2% yield strength (MPa) 397 Elongation (%) 40 Tensile Strength (MPa) 554 AWS Standard A5.9 ER310 Identification color Edge / Gold JIS Standard Z3321 Y310from ₱19,731.93Min. 9 days
- ESCO Φ1.6mm / 200g Welding rod (for stainless steel)A welding rod used for welding stainless steel materials. We recommend using it with a 200V welder. For stainless steel * The processed plate thickness of the material is x 2 times the diameter of the welding rod.Diameter (Φmm) 1.6 Length (mm) 250 Esco Part No. EA318AD-1.6from ₱2,014.31Min. 6 days
- NIPPON WELDING ROD Welding rod for stainless steelIt is used for welding SUS 309S and 13Cr steel, and for welding different materials between stainless steel and carbon steel or low alloy steel. Since the carbon content is suppressed to 0.04% or less, it is also suitable for initial layer welding or lining welding of low carbon stainless clad st... Read MoreElongation (%) 40 Tensile Strength (MPa) 561 RoHS directive (corresponding to 10 substances) Correspondence Identification color Edge / Yellow-greenfrom ₱6,163.40Min. 9 days
- Nippon STeel Welding & Engineering (Former Nippon Steel & Sumikin Welding) Welding rod for sulfuric acid dew point corrosion steel S-TEN1It is a low hydrogen omnidirectional welding rod for S-TEN1 and has excellent corrosion resistance in sulfuric acid environment, and also has strong corrosion resistance in hydrochloric acid environment (hydrochloric acid dew point corrosion resistance). In addition, it has good workability in al... Read MoreAbsorption Energy (J) 170(0℃) Elongation (%) 29 Tensile Strength (MPa) 570 Color Pale bluefrom ₱11,919.75Min. 12 days
- TASETO Stainless steel welding rod RNY-309LTaseto RNY309L is designed for low carbon and is ideal for underlaying steel sheets when welding low carbon stainless clad steel. Similar to RNY309, it has excellent performance for welding dissimilar metals and curable alloy steels (SUS410, 430, etc.). Since it has a lime titania type coating, i... Read MoreJIS Standard ES309L-16 AWS Standard E309L-16 applicablefrom ₱3,905.68Min. 5 days
- NIPPON WELDING ROD Welding rod for stainless steelAlthough it is an austenitic stainless steel TIG welding rod, it has excellent intergranular corrosion due to its low carbon content. Suitable for places where harsh corrosion resistance is required, such as flue gas desulfurization equipment, fertilizer plants, and food chemical equipment. * As ... Read Morefrom ₱6,574.57Min. 4 days
- ESCO Φ2.0mm / 200g Welding rod (for stainless steel)A welding rod used for welding stainless steel materials. We recommend using it with a 200V welder. For stainless steel * The processed plate thickness of the material is x 2 times the diameter of the welding rod.Diameter (Φmm) 2 Length (mm) 250 Esco Part No. EA318AD-2.0from ₱1,849.84Min. 6 days
- NIKKO YOZAI MFG Non-sputter coated arc welding rod for stainless steelIt is a welding rod that is often used for food-related welding work. A stainless steel shielded metal arc welding rod that does not spatter. It reduces unnecessary costs such as spatter removal work, improves welding workability in all postures, and has excellent slag peelability. Efficiently ob... Read MoreJIS Standard JIS Z3221 D316L-16from ₱3,206.70Min. 123 days
- Kobelco (Kobe Steel) Welding rod for stainless steelSince the austenite structure contains an appropriate amount of ferrite, crack sensitivity is low, workability is good, and stable welding can be performed. Especially excellent in corrosion resistance in dilute sulfuric acid. Since a low carbon weld metal can be obtained, it has good intergranul... Read MoreAWS Standard A5.4 E316L-16 JIS Standard Z3221 D316L-16from ₱12,330.91Min. 14 days