Electrode Rods
Other Related Pages
MonotaRO Tungsten Electrode Rod with CeriumFor both AC and DC. For TIG welding. Ideal for aluminum welding. With 2% cerium * Do not use for anything other than its intended purpose.Rod Length (mm) 150 Welding Current (A) 60~150: DC
50~120: Interchange Type Cerium- Miller (WELDCRAFT) WELDCRAFT Rare Earth Tungsten ElectrodeBy mixing various types of oxides, the best arc startability and safety are achieved for both DC and AC welding.Rod Length (mm) 150 Oxide Cerium, lanthanum, yttrium, etc. AC / DC Current DC, AC inverter Type Multi-mix Suitable Base Materials all
- Miller (WELDCRAFT) WELDCRAFT Tungsten 2% ceriumIdeal for DC welding. Can also be used for AC welding. It has excellent arc startability at low current and consumes less electrode than tungsten containing thorium. (As an alternative to tungsten with thorium)Specification Cerium AC / DC Current DC, AC inverter
- Miller (WELDCRAFT) WELDCRAFT Tungsten 2% lanthanumIdeal for direct welding with 2.0% lantern. It has excellent arc startability and stability, and has the least electrode wear. (As an alternative to tungsten with thorium)AC / DC Current DC Type Lantana Oxide lanthanum
- MIGHT INDUSTRY TritanRoHS directive (corresponding to 10 substances) Correspondence
- Miller (WELDCRAFT) WELDCRAFT Tungsten Pure TanIdeal for AC welding with a pure tungsten thyristor welder.Rod Length (mm) 175 Ratio 99.5% tungsten, 0.5% other AC / DC Current AC thyristor Suitable Base Materials Aluminum, magnesium Oxide Pure tungsten Type Pure tungsten
- Panasonic Smart Factory Solutions Ceria Type Tungsten Electrode (For AC / DC TIG)2% ceria is consumed and has a long life. Moreover, there is little burning of the arc and good restartability.Rod Length (mm) 150
- TRUSCO TIG tungsten electrode for weldingA tungsten electrode rod that can be used for both DC and AC welding. Especially suitable for aluminum welding. For TIG weldingLength (mm) 150 Specification 2% with ceriumfrom ₱1,932.08Min. 2 days
- DAIHEN Tungsten rod with lantanaContains 2% lantana. An electrode rod that does not contain radioactive substances. It has excellent durability, arc start, and arc stability. Suitable for DC welding.Rod Length (mm) 150 Type Lantana Suitable for DC
- MIGHT INDUSTRY E3 Tungsten (Lantana)Rod Length (mm) 150 RoHS directive (corresponding to 10 substances) Correspondence Type Rare earthfrom ₱1,890.96Min. 2 days
-
-
-
-
- MIGHT INDUSTRY Cerium-containing tungsten electrodeRoHS directive (corresponding to 10 substances) Correspondence
-
-
- NT NT cerium-containing tungsten electrodeLength (mm) 150 Specification Contains 2% cerium Color Gray Symbol YWCo-2from ₱1,849.84Min. 5 days
-
- STAR ELECTRIC MANUFACTURING (SUZUKID) Electrode rodA TIG electrode rod compatible with IMAX 180/230. Tungsten electrode rod containing 2% cerium.Rod Length (mm) 150from ₱3,083.35Min. 7 days
-
- Miki Seiki Straight tip + F type + 25Φ + water hole depth 30mmStandard straight tipOuter Diameter (Φmm) 25 Hole Depth (mm) 30from ₱1,973.19Min. 6 days
- Miki Seiki Straight Holder 25ΦTip holder for spot weldersOuter Dia. at the Top (Φmm) 10.5 Outer Diameter (Φmm) 25from ₱3,905.68Min. 6 days
- Miki Seiki Bent tip + F type + 12ΦElectrode tip to avoid interference with workpieceTaper 1/10 Outer Diameter (Φmm) 12 Overall Length L (mm) 70from ₱1,233.09Min. 6 days
- Miki Seiki Bent tip + P type + 12ΦElectrode tip to avoid interference with workpieceTaper 1/10 Outer Diameter (Φmm) 12 Overall Length L (mm) 70from ₱1,233.09Min. 6 days
-
- Miki Seiki Straight tip + F type + 20ΦStandard straight tipOuter Diameter (Φmm) 20from ₱986.39Min. 6 days
- Miki Seiki Straight Tip F Type 25ΦStandard straight tipOuter Diameter (Φmm) 25from ₱1,233.09Min. 6 days
- Miki Seiki Straight tip + stepped type + 12ΦStandard straight tipTaper 1/10 Outer Diameter (Φmm) 12from ₱657.46Min. 6 days
- Miki Seiki Straight tip + long P type + 12ΦStandard straight tipTaper 1/10 Outer Diameter (Φmm) 12from ₱780.81Min. 6 days
- TOSHIBA MATERIALS Tungsten Electrode Rod with 2% ThoriatedFor DC positive electrode, balanced AC, and DC reverse polarity welding, the electron radioactivity is remarkably superior to that of pure tungsten electrode rods, and arcs are easily generated. Since the electrode temperature during operation is low, the electrode rod does not melt into the base... Read MoreLength (mm) 150 Ingredient With 2% Tria
- Miki Seiki Straight Tip Stepped Type 16ΦStandard straight tipOuter Diameter (Φmm) 16from ₱986.39Min. 6 days
- Miki Seiki Bent tip + P type + 12Φ + total length 80LElectrode tip to avoid interference with workpieceTaper 1/10 Outer Diameter (Φmm) 12 Dimension H (mm) 20 Overall Length L (mm) 80from ₱1,233.09Min. 6 days
- Miki Seiki Straight tip + F type + 12Φ + water hole depth 30mmStandard straight tipTaper 1/10 Outer Diameter (Φmm) 12 Hole Depth (mm) 30from ₱390.20Min. 6 days
- Miki Seiki Electrode Bent Tip E Type 12ΦElectrode tip to avoid interference with workpieceTaper 1/10 Outer Diameter (Φmm) 12 Overall Length L (mm) 70from ₱1,562.03Min. 6 days
- Miki Seiki Straight Tip F Type 16ΦStandard straight tipOuter Diameter (Φmm) 16from ₱616.34Min. 6 days
- Miki Seiki Straight tip + F type + 32ΦStandard straight tipOuter Diameter (Φmm) 32from ₱1,767.61Min. 6 days
- Miki Seiki Bent tip + 20R type + 16ΦElectrode tip to avoid interference with workpieceTaper 1/10 Outer Diameter (Φmm) 16 Overall Length L (mm) 80from ₱1,767.61Min. 6 days
- DAIHEN Tungsten Electrode with 2% CeriaTungsten electrode for TIG welding machine. Excellent arc stability and arc start performance. It is used for automatic welding machines and robot welding because it wears less and the frequency of electrode polishing can be reduced. For both DC TIG welding and AC TIG welding.Length (mm) 150from ₱1,973.19Min. 2 days
- Miki Seiki Straight tip + E type + 12ΦStandard straight tipTaper 1/10 Outer Diameter (Φmm) 12from ₱402.53Min. 6 days
